|
|
|
06-04-2009, 03:30 PM
|
#1 |
|
Registered User
Join Date: Jun 2009
Location: Abilene Texas
Posts: 89
|
Vent window rubber
Working on rebuilding a door . Replacing the rubber and weatherstripping on everything. Have been disassembling the vents in the process of cleaning everything up and putting new paint on everything. Any tricks on the vent window rubber? I also have the rivets and the rivet tool.....but have not been reading good reviews of the tool. Any experience is appreciated....Did a search and most of what came up was '67-'72 stuff. Doing this on a '63 GMC.
|
|
|
|
06-04-2009, 03:57 PM
|
#2 |
|
Wheelin' and Dealin'
Join Date: Nov 2007
Location: poquoson va
Posts: 320
|
Re: Vent window rubber
if you got the rubber from lmc its like mine and it wont shut right without a squegee to work it down in the rubber,
__________________
1965 Chevy c-10 fleetside long bed with 06 gto LS2/T56 inside  Porterbuilt Extreme front and rear 12bolt w/ eaton tru-trac 4:11 gears 1BADD65my build thread: http://67-72chevytrucks.com/vboard/s...=1#post2601700 |
|
|
|
|
06-04-2009, 04:16 PM
|
#3 |
|
Registered User
Join Date: Jun 2009
Location: Abilene Texas
Posts: 89
|
Re: Vent window rubber
Classic Parts (A.K.A Chevy Duty)
|
|
|
|
|
06-04-2009, 06:35 PM
|
#4 |
|
Registered User
Join Date: Jun 2009
Location: Abilene Texas
Posts: 89
|
Re: Vent window rubber
Would I be better off getting one of the rivet guns rather than mess with that cheapie punch looking tool?
|
|
|
|
|
06-04-2009, 06:55 PM
|
#5 |
|
Junior Member
Join Date: Sep 2003
Location: yreka, ca
Posts: 270
|
Re: Vent window rubber
I put a piece of round stock in my vise to back up the rivet when I used the rivet tool. It helped a little, but it's not a real fun job.
__________________
63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10 |
|
|
|
|
06-04-2009, 07:02 PM
|
#6 |
|
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: Vent window rubber
someone needs to post up a how-to with pics
__________________
CHEVY ONLY
|
|
|
|
|
06-04-2009, 07:56 PM
|
#7 |
|
Registered User
Join Date: Jun 2009
Location: Abilene Texas
Posts: 89
|
Re: Vent window rubber
I already figgered I'm gonna need 3 or 4 hands.......but, hey that's what a kid is for right?
|
|
|
|
|
06-04-2009, 09:32 PM
|
#8 |
|
Wheelin' and Dealin'
Join Date: Nov 2007
Location: poquoson va
Posts: 320
|
Re: Vent window rubber
slavery!!!
__________________
1965 Chevy c-10 fleetside long bed with 06 gto LS2/T56 inside Porterbuilt Extreme front and rear 12bolt w/ eaton tru-trac 4:11 gears 1BADD65my build thread: http://67-72chevytrucks.com/vboard/s...=1#post2601700 |
|
|
|
|
06-04-2009, 11:31 PM
|
#9 |
|
HOW long until spring??
 
Join Date: Mar 2009
Location: Star Idaho
Posts: 1,413
|
Re: Vent window rubber
I ended up using the "tool " to start the rivet, Next I used a 5/8 center punch to flare it out, then a flat drift punch to flatten it out. A 5' vise with a 1/2 flat bar in the jaws was the "third set of hands" A 200 lb anvil was used when ever possible. I found lots of Dawn dish soap helped slide the rubber in to place. I am still not happy with the way the hinge pivot turned out. It works but looks tacky.Brothers Trucks furnished the kit. Good quality stuff.
__________________
69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project" |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
