Cutting up a cab for patches..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 06-09-2009, 11:43 AM

I'm cutting up a pretty solid cab for patches. Rockers and dog legs are toast, everything else is solid. All 4 OEM cab braces are rust free and straight, $150 + shipping. Let me know what you want and I will price.

drunkbus · 06-09-2009, 12:04 PM

How is the firewall area behind the distributor? Mine looks like it lost a fight with a ball pean hammer. Shipping would be to 97459.

drunkbus · 06-09-2009, 06:31 PM

Quote:

Originally Posted by drunkbus

How is the firewall area behind the distributor? Mine looks like it lost a fight with a ball pean hammer. Shipping would be to 97459.

Something like this. You can see in the picture where it was beat to fit an HEI distributor and above that are some holes drilled that shouldn't be there. Wherever looks like a logical place to cut it out that would leave me with a good piece for a patch would be fine.

**Hart_Rod** · 06-09-2009, 06:35 PM

Quote:

Originally Posted by drunkbus

Something like this. You can see in the picture where it was beat to fit an HEI distributor and above that are some holes drilled that shouldn't be there. Wherever looks like a logical place to cut it out that would leave me with a good piece for a patch would be fine.

How about $45 shipped and I'll cut it down to the pinch weld on the hump (this had a high hump). You'll have plenty for a patch,

.

drunkbus · 06-12-2009, 12:57 PM

Quote:

Originally Posted by Hart_Rod

How about $45 shipped and I'll cut it down to the pinch weld on the hump (this had a high hump). You'll have plenty for a patch,

.

How do you want payment? I could do paypal or money order.

**Hart_Rod** · 06-12-2009, 01:13 PM

Quote:

Originally Posted by drunkbus

How do you want payment? I could do paypal or money order.

Paypal will work, robhartley@aol.com. Thanks!

*c10_1971* · 06-09-2009, 04:09 PM

what about the area on the passenger side back corner, where the jacks usually mount? about 12 inches in and to the first seat bolt hole

**Hart_Rod** · 06-09-2009, 04:18 PM

Quote:

Originally Posted by drunkbus

How is the firewall area behind the distributor? Mine looks like it lost a fight with a ball pean hammer. Shipping would be to 97459.

It's good. Can you take a picture of where you would like the cuts?

Quote:

Originally Posted by c10_1971

what about the area on the passenger side back corner, where the jacks usually mount? about 12 inches in and to the first seat bolt hole

Good also. I need pictures of where you would like the cuts.

*c10_1971* · 06-09-2009, 04:23 PM

Rob, no camera..its the back corner on the passenger side about 12 inches in and 8 inches wide...does that help?

*c10_1971* · 06-09-2009, 04:25 PM

it also connect to the back of the cab and the cab corner and comes up by the rear door pillar

Dynomutt · 06-09-2009, 04:48 PM

If it's not a part of what C10 needs, I'm interested in the pass side rear corner. From about the rear glass down and from about the first rear panel rib to the pillar (including pillar). Shipped to 75007

**Hart_Rod** · 06-09-2009, 06:25 PM

Quote:

Originally Posted by drunkbus

How is the firewall area behind the distributor? Mine looks like it lost a fight with a ball pean hammer. Shipping would be to 97459.

Quote:

Originally Posted by c10_1971

what about the area on the passenger side back corner, where the jacks usually mount? about 12 inches in and to the first seat bolt hole

Quote:

Originally Posted by Dynomutt

If it's not a part of what C10 needs, I'm interested in the pass side rear corner. From about the rear glass down and from about the first rear panel rib to the pillar (including pillar). Shipped to 75007

Here's some pictures guys. Use paintbrush or similar to let me know where you want the cuts. Thanks,

R/

Robert Paul Thomas · 06-09-2009, 06:30 PM

How is the pass side A post, right where it meets the dash, at the factory seamed pinch weld

**Hart_Rod** · 06-10-2009, 10:15 PM

Quote:

Originally Posted by drunkbus

How is the firewall area behind the distributor? Mine looks like it lost a fight with a ball pean hammer. Shipping would be to 97459.

Are you still interested in the patch panel?

Quote:

Originally Posted by Robert Paul Thomas

How is the pass side A post, right where it meets the dash, at the factory seamed pinch weld

Here's a picture of what I think you're talking about.

.

Robert Paul Thomas · 06-12-2009, 06:52 PM

Rob, thats exactly what I need, about five inches each side of the center of the radius on the pinch weld cut straight through the post, and about two inches of the dash. Does this help?? Rob

**Hart_Rod** · 06-12-2009, 07:06 PM

Quote:

Originally Posted by drunkbus

Payment sent. Thanks, Shaun

Thanks, I got it. I'll get it cut out and shipped by next week.

Quote:

Originally Posted by Robert Paul Thomas

Rob, thats exactly what I need, about five inches each side of the center of the radius on the pinch weld cut straight through the post, and about two inches of the dash. Does this help?? Rob

PM sent.

yellowGT · 06-13-2009, 01:31 AM

how much for these pieces. I need both sides. shipped to 75040

**Hart_Rod** · 06-13-2009, 08:05 AM

Quote:

Originally Posted by yellowGT

how much for these pieces. I need both sides. shipped to 75040

How about $110 shipped? Each side has a few dents but no rust. LMK.

**Hart_Rod** · 06-13-2009, 10:50 PM

Quote:

Originally Posted by Robert Paul Thomas

Rob, thats exactly what I need, about five inches each side of the center of the radius on the pinch weld cut straight through the post, and about two inches of the dash. Does this help?? Rob

Here's where I will cut it:

r/

**Hart_Rod** · 06-09-2009, 06:32 PM

Great shape. Let me know where you want it cut. I also have the oil line pieces you were looking for.

*c10_1971* · 06-09-2009, 08:07 PM

Here is the section I need

brn agn · 06-09-2009, 08:37 PM

How about the two sections shown below? Shipping may kill the deal due to the size...

I would also be interested in the section that the wiper motor bolts to. If I could get 12" around the wiper motor opening on all sides, that would be perfect.

Dynomutt · 06-09-2009, 11:14 PM

Here's what I'm looking for.....

**Hart_Rod** · 06-10-2009, 08:19 AM

Quote:

Originally Posted by Robert Paul Thomas

How is the pass side A post, right where it meets the dash, at the factory seamed pinch weld

Need a picture. PM sent.

Quote:

Originally Posted by c10_1971

Here is the section I need

PM Sent.

Quote:

Originally Posted by brn agn

How about the two sections shown below? Shipping may kill the deal due to the size...

I would also be interested in the section that the wiper motor bolts to. If I could get 12" around the wiper motor opening on all sides, that would be perfect.

How about $100 + shipping for all 3 pieces?

Quote:

Originally Posted by Dynomutt

Here's what I'm looking for.....

$80 + shipping?

brn agn · 06-10-2009, 09:31 AM

Quote:

Originally Posted by Hart_Rod

How about $100 + shipping for all 3 pieces?

That sounds good to me.

06-09-2009, 11:43 AM	#1
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,846	Cutting up a cab for patches..... I'm cutting up a pretty solid cab for patches. Rockers and dog legs are toast, everything else is solid. All 4 OEM cab braces are rust free and straight, $150 + shipping. Let me know what you want and I will price. Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-09-2009, 12:04 PM	#2
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: Cutting up a cab for patches..... How is the firewall area behind the distributor? Mine looks like it lost a fight with a ball pean hammer. Shipping would be to 97459.

06-09-2009, 04:09 PM	#7
c10_1971 Account Suspended Join Date: May 2009 Location: Asheville, NC Posts: 75	Re: Cutting up a cab for patches..... what about the area on the passenger side back corner, where the jacks usually mount? about 12 inches in and to the first seat bolt hole

06-09-2009, 04:23 PM	#9
c10_1971 Account Suspended Join Date: May 2009 Location: Asheville, NC Posts: 75	Re: Cutting up a cab for patches..... Rob, no camera..its the back corner on the passenger side about 12 inches in and 8 inches wide...does that help?

06-09-2009, 04:25 PM	#10
c10_1971 Account Suspended Join Date: May 2009 Location: Asheville, NC Posts: 75	Re: Cutting up a cab for patches..... it also connect to the back of the cab and the cab corner and comes up by the rear door pillar

06-09-2009, 04:48 PM	#11
Dynomutt Registered User Join Date: Mar 2009 Location: North Texas Posts: 440	Re: Cutting up a cab for patches..... If it's not a part of what C10 needs, I'm interested in the pass side rear corner. From about the rear glass down and from about the first rear panel rib to the pillar (including pillar). Shipped to 75007 __________________ MARQ Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=446194

06-09-2009, 06:30 PM	#13
Robert Paul Thomas 1967 C-10 SWB LS-6 T-56 Join Date: Feb 2007 Location: Ontario Canada Posts: 425	Re: Cutting up a cab for patches..... How is the pass side A post, right where it meets the dash, at the factory seamed pinch weld

06-12-2009, 06:52 PM	#15
Robert Paul Thomas 1967 C-10 SWB LS-6 T-56 Join Date: Feb 2007 Location: Ontario Canada Posts: 425	Re: Cutting up a cab for patches..... Rob, thats exactly what I need, about five inches each side of the center of the radius on the pinch weld cut straight through the post, and about two inches of the dash. Does this help?? Rob

06-13-2009, 01:31 AM	#17
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: Cutting up a cab for patches..... how much for these pieces. I need both sides. shipped to 75040 Attached Images __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

06-09-2009, 06:32 PM	#20
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,846	Re: Cutting up a cab for patches..... Great shape. Let me know where you want it cut. I also have the oil line pieces you were looking for. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-09-2009, 08:07 PM	#21
c10_1971 Account Suspended Join Date: May 2009 Location: Asheville, NC Posts: 75	Re: Cutting up a cab for patches..... Here is the section I need Attached Images

06-09-2009, 08:37 PM	#22
brn agn Registered User Join Date: Mar 2009 Location: Youngsville, NC Posts: 952	Re: Cutting up a cab for patches..... How about the two sections shown below? Shipping may kill the deal due to the size... I would also be interested in the section that the wiper motor bolts to. If I could get 12" around the wiper motor opening on all sides, that would be perfect.

06-09-2009, 11:14 PM	#23
Dynomutt Registered User Join Date: Mar 2009 Location: North Texas Posts: 440	Re: Cutting up a cab for patches..... Here's what I'm looking for..... Attached Images __________________ MARQ Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=446194

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.