The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-14-2009, 05:36 PM   #1
83burban
Registered User
 
Join Date: Feb 2008
Location: la
Posts: 345
Transmission and Engine Oil Cooler - Stock GM

I have an 83 c10 suburban heavy half that i recently dropped a new motor and trans in (350/ 700r4) This is my daily driver and runs great, just drove it 2800 miles across the country in 3 days with 0 issues.

But here's the question - when I got it, the motor had an external oil cooler on it but no external trans cooler. I haven't hooked up the old oil cooler because I don't want the old motors junk to float into my new motor. I want to keep it stock gm with the oil cooler but am having trouble finding the correct one and the appropriate lines. Can any point me in the right direction here?

This car will see a couple more cross country drives and will tow my other cars on occasion which is why I want a trans cooler. Any one have any recommendations? Did gm make have an option that I could get. I don't want to get a cheep aftermarket one but don't want to drop more on the cooler than i did the trans.

Thanks for all the help
83burban is offline   Reply With Quote
Old 06-14-2009, 06:57 PM   #2
gchemist
BAD BOW-Silverado XST
 
gchemist's Avatar
 
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
Re: Transmission and Engine Oil Cooler - Stock GM

I run an additional 24000 GVW external cooler.


The tranny pressure lines goes into the radiator. The radiator to the external cooler back to the tranny.
__________________
Gerardo a.k.a. Mad Chemist
Silverado XST videos
gchemist is offline   Reply With Quote
Old 06-15-2009, 06:54 AM   #3
Keith Seymore
Registered User
 
Keith Seymore's Avatar
 
Join Date: May 2009
Location: Motor City
Posts: 9,226
Re: Transmission and Engine Oil Cooler - Stock GM

I *think* the external oil cooler was RPO KC4, which could be ordered separately on some models and was packaged with the towing option(s) in some cases.

I do not recall GM offering a separate trans cooler for our trucks.

K
__________________
Chevrolet Flint Assembly
1979-1986
GM Full Size Truck Engineering
1986 - 2019
Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926
My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524
Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/
Keith Seymore is offline   Reply With Quote
Old 06-16-2009, 12:21 AM   #4
SBTork
Garage wrench
 
SBTork's Avatar
 
Join Date: Feb 2008
Location: LaCrosse, WI
Posts: 1,855
Re: Transmission and Engine Oil Cooler - Stock GM

Quote:
Originally Posted by Keith Seymore View Post
I *think* the external oil cooler was RPO KC4, which could be ordered separately on some models and was packaged with the towing option(s) in some cases.

I do not recall GM offering a separate trans cooler for our trucks.

K

100% correct
__________________
-Adam


90 V1500 GMC Suburban 350/700R4/NP241.....
01 Saturn SL1 stock DD.....
SBTork is offline   Reply With Quote
Old 06-16-2009, 10:58 AM   #5
83burban
Registered User
 
Join Date: Feb 2008
Location: la
Posts: 345
Re: Transmission and Engine Oil Cooler - Stock GM

Thanks for all the help. Does anybody know where I can get replacement parts for the oil cooler. I still have everything, but don't want the old gunk to flow through the engine.

Can I have it boiled out?
83burban is offline   Reply With Quote
Old 06-15-2009, 12:58 PM   #6
pokethesmot
profeshinaly unimployed
 
pokethesmot's Avatar
 
Join Date: Dec 2008
Location: hazlehurst, GA
Posts: 1,232
Re: Transmission and Engine Oil Cooler - Stock GM

mine has a trans cooler but i know it aint stock
__________________

"having mud flaps is like asking for a smaller trophy"
pokethesmot is offline   Reply With Quote
Old 06-16-2009, 11:03 AM   #7
pokethesmot
profeshinaly unimployed
 
pokethesmot's Avatar
 
Join Date: Dec 2008
Location: hazlehurst, GA
Posts: 1,232
Re: Transmission and Engine Oil Cooler - Stock GM

that might work...ide try some oil additives and just like push then through it
__________________

"having mud flaps is like asking for a smaller trophy"
pokethesmot is offline   Reply With Quote
Old 06-16-2009, 11:08 AM   #8
Keith Seymore
Registered User
 
Keith Seymore's Avatar
 
Join Date: May 2009
Location: Motor City
Posts: 9,226
Re: Transmission and Engine Oil Cooler - Stock GM

Quote:
Originally Posted by 83burban View Post
Thanks for all the help. Does anybody know where I can get replacement parts for the oil cooler. I still have everything, but don't want the old gunk to flow through the engine.

Can I have it boiled out?

Quote:
Originally Posted by pokethesmot View Post
that might work...ide try some oil additives and just like push then through it
Yep - if you've got all the pieces then I'd try just flushing it out. Use some paint thinner or commercially available "oil flush" and run it through (backflush: run it through backwards, too, if possible)

K
__________________
Chevrolet Flint Assembly
1979-1986
GM Full Size Truck Engineering
1986 - 2019
Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926
My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524
Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/
Keith Seymore is offline   Reply With Quote
Old 06-16-2009, 11:11 AM   #9
pokethesmot
profeshinaly unimployed
 
pokethesmot's Avatar
 
Join Date: Dec 2008
Location: hazlehurst, GA
Posts: 1,232
Re: Transmission and Engine Oil Cooler - Stock GM

or you could always give it too me and ile take cair of all that...then put it on my truck for a while...you know, to test it out
__________________

"having mud flaps is like asking for a smaller trophy"
pokethesmot is offline   Reply With Quote
Old 06-16-2009, 08:55 PM   #10
83burban
Registered User
 
Join Date: Feb 2008
Location: la
Posts: 345
Re: Transmission and Engine Oil Cooler - Stock GM

Im a little hesitant to attach it and flush it, the crap in it will either float into the motor or the thinner will work so well that it could hurt bearings by flushing oil out of the motor too.

I'm going to see if a shop will boil it out, but if not does anyone know where I can get an oem piece...if not then I will just go aftermarket.

Thanks
83burban is offline   Reply With Quote
Old 06-16-2009, 10:58 PM   #11
Pyrotechnic
Registered User
 
Pyrotechnic's Avatar
 
Join Date: Feb 2007
Location: Austin, TX
Posts: 3,930
Re: Transmission and Engine Oil Cooler - Stock GM

I don't think Keith meant to flush it out while connected to the motor, but rather while it's off the truck and in your hands simply fill it with some solvent like mineral spirits and let it sit for awhile. Rinse and repeat till the solvent comes out clear.
__________________
1977 GMC Sierra Grande
Pyrotechnic is offline   Reply With Quote
Old 06-17-2009, 01:06 AM   #12
83burban
Registered User
 
Join Date: Feb 2008
Location: la
Posts: 345
Re: Transmission and Engine Oil Cooler - Stock GM

pyro: I don't know what I was thinking when I typed that...just been on eof those days. I will wash it out this weekend when I get a chance and put it all back together when I get the tranny cooler set up.

Thanks for all the help guys.
83burban is offline   Reply With Quote
Old 06-17-2009, 06:36 AM   #13
Keith Seymore
Registered User
 
Keith Seymore's Avatar
 
Join Date: May 2009
Location: Motor City
Posts: 9,226
Re: Transmission and Engine Oil Cooler - Stock GM

Quote:
Originally Posted by Pyrotechnic View Post
I don't think Keith meant to flush it out while connected to the motor, but rather while it's off the truck and in your hands simply fill it with some solvent like mineral spirits and let it sit for awhile. Rinse and repeat till the solvent comes out clear.


Yes - like if you have a parts washer with a pump on it. You could flow the solvent through it both ways and flush it out pretty good.

Lather... rinse... repeat!



K
__________________
Chevrolet Flint Assembly
1979-1986
GM Full Size Truck Engineering
1986 - 2019
Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926
My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524
Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/

Last edited by Keith Seymore; 06-17-2009 at 06:36 AM.
Keith Seymore is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:33 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com