What brakes interchange?

[1bad69camaro]

I have a 68 gmc SWB all manual drum. I heard local that 73 up discs fit if i use the whole spindle. Any truth to this? I am mechanically inclined and readily have these trucks in our junkyards. ANY info greatly appreciated.

[Longhorn Man]

it is more involved than that, but yes, you can use front end parts 71 - 87.
The best way to do it IMO is swap out the entire front crossmember. this way there is absolutly no question what is what when you go to replace a front end component.

[LONGHAIR]

Agreed 100%, everything is from the same year truck and there are no "custom" or "adapter" type parts involved.

[1bad69camaro]

Originally Posted by Longhorn Man

it is more involved than that, but yes, you can use front end parts 71 - 87.
The best way to do it IMO is swap out the entire front crossmember. this way there is absolutly no question what is what when you go to replace a front end component.

Is the crossmember a bolt in deal? Or is it the deal where you have to cut the crossmember out. can i just take the whole assembly lose on each side and bolt it in my truck?

[LONGHAIR]

Originally Posted by 1bad69camaro

Is the crossmember a bolt in deal? Or is it the deal where you have to cut the crossmember out. can i just take the whole assembly lose on each side and bolt it in my truck?

It is a bolt-in deal...2 of the bolt holes are slightly mis-aligned and require some drilling, but the rest of them are right-on.
The most difficult part of the swap is figuring out how to support the engine and the frame at the same time.

[oldblue1968chevy]

i think you may have to drill some holes in your frame to mount the diff. crossmember..but i may be wrong...

when i did the swap i useed spindles and disc stuff from 72 chevy...and just bought new balljoitns for a 72 truck and put em in my 68 a arms....used everything from pitman to idler arm bolted on and put new tierod ends on it bled brakes put a power booster bam

[1bad69camaro]

Originally Posted by oldblue1968chevy

i think you may have to drill some holes in your frame to mount the diff. crossmember..but i may be wrong...

when i did the swap i useed spindles and disc stuff from 72 chevy...and just bought new balljoitns for a 72 truck and put em in my 68 a arms....used everything from pitman to idler arm bolted on and put new tierod ends on it bled brakes put a power booster bam

Is 72 different from 73 -87 stuff?