other set-ups for p/s on a250 six cylinder? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

big blue 72 · 06-27-2009, 10:22 PM

What cars/trucks should i be looking for to get the p/s bracketsand hoses for a 250 straight six, that is going in the panel truck with a TH350?
Years, Models?

Frizzle Fry · 06-28-2009, 01:45 PM

70's Novas is what I recall. I'm sure there are others.

big blue 72 · 06-28-2009, 09:32 PM

yeah, most of the yards around here have been picked clean/crushed of all the older models. I was thinking about 80's models cars/vans etc.
Anybody got something from a more recent era vehicle?

Byronic · 06-29-2009, 09:49 AM

I found power steering brackets off of a 86 chevy half ton with the 4.1 inl6. I will have to modify the top bracket as it had a mount hole for the intake manifold and mine does not. I got it all for $20. I also got the hei dizzy for $27.50

big blue 72 · 06-29-2009, 11:09 AM

Thanks Bryonic, that is the answer i was looking for . 86 or so i will be checking out , and for the hei also. Thanks again

Byronic · 06-29-2009, 11:42 AM

Oops! I gave you the wrong year. It was a 1983 half ton I got all the parts. The 86 is where I gat my swaybar. Too many parts off to many years.

Hope this helps

06-27-2009, 10:22 PM	#1
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	other set-ups for p/s on a250 six cylinder? What cars/trucks should i be looking for to get the p/s bracketsand hoses for a 250 straight six, that is going in the panel truck with a TH350? Years, Models? __________________ Broken Back Club 72 Club GMC Club Panel truck Club 6 cylinder Club Unfinished Projects Club Outdoor Sportsmens Club

06-28-2009, 01:45 PM	#2
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: other set-ups for p/s on a250 six cylinder? 70's Novas is what I recall. I'm sure there are others.

06-28-2009, 09:32 PM	#3
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	Re: other set-ups for p/s on a250 six cylinder? yeah, most of the yards around here have been picked clean/crushed of all the older models. I was thinking about 80's models cars/vans etc. Anybody got something from a more recent era vehicle? __________________ Broken Back Club 72 Club GMC Club Panel truck Club 6 cylinder Club Unfinished Projects Club Outdoor Sportsmens Club

06-29-2009, 09:49 AM	#4
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Re: other set-ups for p/s on a250 six cylinder? I found power steering brackets off of a 86 chevy half ton with the 4.1 inl6. I will have to modify the top bracket as it had a mount hole for the intake manifold and mine does not. I got it all for $20. I also got the hei dizzy for $27.50 __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed

06-29-2009, 11:09 AM	#5
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	Re: other set-ups for p/s on a250 six cylinder? Thanks Bryonic, that is the answer i was looking for . 86 or so i will be checking out , and for the hei also. Thanks again __________________ Broken Back Club 72 Club GMC Club Panel truck Club 6 cylinder Club Unfinished Projects Club Outdoor Sportsmens Club

06-29-2009, 11:42 AM	#6
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Re: other set-ups for p/s on a250 six cylinder? Oops! I gave you the wrong year. It was a 1983 half ton I got all the parts. The 86 is where I gat my swaybar. Too many parts off to many years. Hope this helps __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.