Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
07-03-2009, 07:57 PM | #1 |
Champagne Taste on Beer Budget
Join Date: Dec 2008
Location: High Ridge, Missouri
Posts: 2,190
|
Best Place for Front Disc Brake Conversion?
Trying to have a place that has good quality and prices to convert my front drum brakes to 5 lug disc brake setup. I already have the master cylinder and power booster so I just need the prop valve and all the other hardware.
So please give me your input on everyones experences that you have had with your conversion and what company that you went with. Thanks.
__________________
Coming Soon: Project 1970 Country Truck |
07-03-2009, 09:33 PM | #2 |
Junior Member
Join Date: Dec 2006
Location: Southeast Missouri
Posts: 2,436
|
Re: Best Place for Front Disc Brake Conversion?
I have never done it, but I have read on here that others have done it by getting the whole front assembly from a '71 or newer donor truck and putting it in the place of the orginal.
I am sure some one else will chime in, but this will take this to the top. Danny
__________________
'67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E. |
07-03-2009, 10:01 PM | #3 |
Next project: 1970 K10
Join Date: Feb 2004
Location: Fort Collins, Colo 80524
Posts: 6,684
|
Re: Best Place for Front Disc Brake Conversion?
The company to use is GM. Find a 71-87 donor truck and R&R the entire cross member. That is the easiest and cheapest.
__________________
Bob 1970 Chevy K10 LWB "Goldie" 350/TH350 next project!! 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE |
07-03-2009, 11:04 PM | #4 |
Registered User
Join Date: Mar 2009
Location: Youngsville, NC
Posts: 952
|
Re: Best Place for Front Disc Brake Conversion?
I have not purchased the parts yet, but when I do, my plan is to buy a complete kit from GMCPauls. The kit includes the necessary component for the brakes as well as drop spindles and rear lower springs. Here is a link:
http://www.gmcpauls.com/67-72_d&s.htm Part #1120741 I'm curious to see if anyone else has experience with this kit.
__________________
1969 C10 SWB Project Charity Case AKA "Roscoe" 1971 Cheyenne Super A Combined Effort The Service Station-A practical ministry for those in need |
07-03-2009, 11:17 PM | #5 |
Grandpa in the rustmobile...
Join Date: Nov 2008
Location: Spokane WA/Viola TN
Posts: 11,422
|
Re: Best Place for Front Disc Brake Conversion?
i was going to do that but i pieced together stock spinleds rotors etc etc and rebuild the frontend ive got like 450 in all mine....i may buy drop spindles soo ntough
__________________
John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4 |
07-03-2009, 11:35 PM | #6 |
Champagne Taste on Beer Budget
Join Date: Dec 2008
Location: High Ridge, Missouri
Posts: 2,190
|
Re: Best Place for Front Disc Brake Conversion?
I bought 2" drop springs from GMCPauls Truck Parts so if they have the rest of the parts to complete my conversion I might as well go with them.
Will check it out, thanks.
__________________
Coming Soon: Project 1970 Country Truck |
07-03-2009, 11:51 PM | #7 |
Mejor Que Nada
Join Date: Jun 2006
Location: texas
Posts: 232
|
Re: Best Place for Front Disc Brake Conversion?
I did the ece kit a few years ago it was pretty easy. And they were a great help
__________________
The only thing that separates "Dreams" from "Reality" is TIME and MONEY!!! |
07-03-2009, 11:59 PM | #8 |
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: Best Place for Front Disc Brake Conversion?
I second ECE (Early Classic Enterprises) they offer some great parts, and excellent customer service.
__________________
-Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|