what have you done this week ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

19673ontree · 07-04-2009, 02:57 PM

it seem's like I had not touched my 67 in a long time and got to wanting to ride it down to pigeon forge in september so I started working on it and it hasn't stopped !

#1 put in a 3.08 set of gear's and chunk
#2 drove it a few hundred mile's then changed out the rear end grease
that little job is now done !
#3 took my wheel's off balanced my tire's and painted my wheel's shiny black instead of the flat black like I had them ,
#4 in progress gonna put in a new rear main seal and a new oil pan gasket
(IN THE MORNING I GUESS)
#5 installed new rear brake shoe's ,

I hope after tommorow I will have it ready to go !!

so what have you done this week ?

STOCKISH · 07-04-2009, 03:29 PM

I looked at my rolling chassis and cab in the garage and then realized it was too hot and went back in the house and ordered more parts for when it is cooler.

19673ontree · 07-04-2009, 03:45 PM

you know , it was flippin hot ! out here when I was changing my gear's too !
but I suffered thru it

myfirstcarwasa73trk · 07-04-2009, 04:05 PM

Put my dash pad on heater box back together searched junk yard for brake booster and lost my favorite socket wrench

mvfd70 · 07-04-2009, 04:27 PM

FINALLY got my frame to the sandblaster. Should be done this weekend or early next week. I can't wait to get it back and put some paint on it.

Indyuke · 07-04-2009, 04:59 PM

Don't kill me...

I worked on a ford.

Jacfourteen · 07-04-2009, 05:31 PM

Quote:

Originally Posted by Indyuke

Don't kill me...

I worked on a ford.

Of course you did...isn't that all they're good for! J/K I have two of them.

I wish I was building my bed floor, but instead I got to move and remodel my bedroom (tear out ceiling and carpet, hang new drywall on ceiling, tape, paint, and install hardwood floor) now I'm just tring to get the room back together.

red71c10 · 07-04-2009, 05:45 PM

I replaced my Driver's side taillight housing, put in a new temp gauge sending unit (it works!) and put one of those abs plastic covers over my ratty old dash pad. My wife got the cover for me for Father's day, and my interior is looking pretty decent now.

SIXT8LOU · 07-05-2009, 05:20 PM

You worked on a ford!!!!!!! Omg you ought to be banished from here.....

myfirstcarwasa73trk · 07-05-2009, 10:18 PM

put seat back in swept floor and I guess this week is over!

petey-pablo · 07-06-2009, 05:55 AM

BIGJAKE97 and I Got some work done on my truck, Mounted passenger side door & fender and driver side door.... and I finally took apart my front grill I got the rivits off, they can be a real pain in the A$$ to get off.

bigguy69 · 07-04-2009, 07:09 PM

fixed the fuel sending unit in the 70. now the gas hand works! got bad gas in the 69. ugh. i guess that is next. what is the best way for getting water out? i do love working on them.

JP2120 · 07-05-2009, 09:46 AM

Quote:

Originally Posted by bigguy69

fixed the fuel sending unit in the 70. now the gas hand works! got bad gas in the 69. ugh. i guess that is next. what is the best way for getting water out? i do love working on them.

Alchohol works great for taking out water. One pint to 10 gals outta do ya. Don't worry about adding too much it will burn out with the gas.
Duke

72CST4x4 · 07-05-2009, 10:26 AM

Finished stripping the cab and pulled the cab from the frame on my latest project, '72 swb. Next step, taking the cab to the sandblaster..

**68350** · 07-04-2009, 08:29 PM

I worked from 6-10 pretty much every day, but got off early yesterday after a rig move. So today I helped my dad switch motors in his 68. The old 396 burned oil so we pulled it and put a .040 402 in it. other than that, just waiting for monday morning to lay down some pipe and pick up some pipe.

BossHogg69 · 07-06-2009, 04:24 PM

Quote:

Originally Posted by 68350

I worked from 6-10 pretty much every day, but got off early yesterday after a rig move. So today I helped my dad switch motors in his 68. The old 396 burned oil so we pulled it and put a .040 402 in it. other than that, just waiting for monday morning to lay down some pipe and pick up some pipe.

boooo rig move! boooo laying down drill pipe!

Elephanthead · 07-04-2009, 10:48 PM

I went to the junk yard and pulled 3 seat belts, and installed them into my 67 C30. Shoulder belts make me feel a lot safer driving it. I also found a sweet saddle blanket seat cover for $2 bucks at the bone yard. It was hot so I didn't start my search for power steering. I also bought a cherry picker and engine stand for $82 bucks at a garage sale for future weekends.

Daves72'GMC · 07-04-2009, 11:38 PM

worked.

67ChevyRedneck · 07-04-2009, 11:51 PM

Moved into my house. What a pain in the ass that was! Ever thrown a $3,500 mattress off of a 3rd floor balcony? I have

Haven't touched the truck in months except to drive it.

**WorkinLonghorn** · 07-05-2009, 12:01 AM

The week before last;
New rear drums,shoes,hardware kits,wheel cylinders and one axle seal.
Changed Diff lube.

19673ontree · 07-05-2009, 08:48 AM

Quote:

Originally Posted by WorkinLonghorn

The week before last;
New rear drums,shoes,hardware kits,wheel cylinders and one axle seal.
Changed Diff lube.

that don't count we are just talking about this week

alexxwing · 07-04-2009, 11:59 PM

me and my lil brother re did his hole brake sistem from master cylinder to lines wheel cylinders pads now his 64 went from stoping bad to stoping not so bad haha damn drum brakes ohh well at least they dont leak any more

dan42 · 07-05-2009, 12:36 AM

Well, I pulled my stereo out for the hundreth time to see if I can get the thumb drive to work, and will have my JY sway bar installed by tomorrow on my '67. Ya-hoo!

prairewolf · 07-05-2009, 06:34 AM

1.paid 68c15 the balance of what I owed him, for his work on my Son's 67 CST.
2.drove it to gas station and added a little air to passenger side front michelin.
3.drove it east of town aways and bought fireworks.
4.got out and looked at it a few times and listended to it run.
5.called one of my Brothers on my cell and told him how much I dig this truck.
6,down shifted coming up to a stop sign and listened to the rear tires chirp.
7.realized again how fortunate I am to know Todd.
8. went to bed a happy camper.

thats about it. ....... thanks Todd, you are one of the reasons life is good.

kent

cparman · 07-05-2009, 06:51 AM

1. disc brake install 1970 Cuda 440
2. 200r4 install & a/c compressor 83 Malibu wagon
3. fixed no start 69 Olds Cutlass
4. repaired dash lights, coolant leak, shifter problem 55 Chevy wagon
5. fixed no crank on 41 Lasalle convertible. Customer hooled the battery up backwards, now it cranks but will not start. Think he took out the pertronix module we installed a few years ago.

07-04-2009, 04:59 PM	#6
Indyuke Registered User Join Date: Feb 2008 Location: Lake Stevens, WA Posts: 623	Re: what have you done this week ? Don't kill me... I worked on a ford.

07-04-2009, 05:45 PM	#8
red71c10 The Red Menace Join Date: Feb 2009 Location: Roseburg, OR Posts: 577	Re: what have you done this week ? I replaced my Driver's side taillight housing, put in a new temp gauge sending unit (it works!) and put one of those abs plastic covers over my ratty old dash pad. My wife got the cover for me for Father's day, and my interior is looking pretty decent now. __________________ 1971 Custom 10 - 350/350TH - Pwr steering, gauges, Chrome front bumper, Chrome hubcaps, Door edge guards, HD rear springs (current) 1968 C-20 Custom Camper - 350/350TH (orig 327), Pwr steering & brakes, gauges w/tach (former) 1968 C-20 - 307/3sp column (Dad's when I was a kid) "Driving is like coloring. Things get messy if you can't stay inside the lines."

07-05-2009, 05:20 PM	#9
SIXT8LOU Registered User Join Date: Oct 2007 Location: Corona,Ca Posts: 146	Re: what have you done this week ? You worked on a ford!!!!!!! Omg you ought to be banished from here..... __________________ 68 C/10 short bed 77 C/20 silverado long bed 05 GMC Duramax Crew

07-05-2009, 10:18 PM	#10
myfirstcarwasa73trk Registered User Join Date: Oct 2006 Location: TEXAS scurry Posts: 183	Re: what have you done this week ? put seat back in swept floor and I guess this week is over!

07-06-2009, 05:55 AM	#11
petey-pablo "THE GREEN GOBLIN" Join Date: Mar 2008 Location: Fremont Ca. Posts: 1,025	Re: what have you done this week ? BIGJAKE97 and I Got some work done on my truck, Mounted passenger side door & fender and driver side door.... and I finally took apart my front grill I got the rivits off, they can be a real pain in the A$$ to get off. Attached Images __________________ Petey-pablo "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi Sold Drive it like you stole it! Petey-pablo@sbcglobal.net Last edited by petey-pablo; 07-07-2009 at 12:14 AM. Reason: spelling

07-04-2009, 02:57 PM	#1
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	what have you done this week ? it seem's like I had not touched my 67 in a long time and got to wanting to ride it down to pigeon forge in september so I started working on it and it hasn't stopped ! #1 put in a 3.08 set of gear's and chunk #2 drove it a few hundred mile's then changed out the rear end grease that little job is now done ! #3 took my wheel's off balanced my tire's and painted my wheel's shiny black instead of the flat black like I had them , #4 in progress gonna put in a new rear main seal and a new oil pan gasket (IN THE MORNING I GUESS) #5 installed new rear brake shoe's , I hope after tommorow I will have it ready to go !! so what have you done this week ? __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

07-04-2009, 03:29 PM	#2
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: what have you done this week ? I looked at my rolling chassis and cab in the garage and then realized it was too hot and went back in the house and ordered more parts for when it is cooler. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

07-04-2009, 03:45 PM	#3
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: what have you done this week ? you know , it was flippin hot ! out here when I was changing my gear's too ! but I suffered thru it __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

07-04-2009, 04:05 PM	#4
myfirstcarwasa73trk Registered User Join Date: Oct 2006 Location: TEXAS scurry Posts: 183	Re: what have you done this week ? Put my dash pad on heater box back together searched junk yard for brake booster and lost my favorite socket wrench

07-04-2009, 04:27 PM	#5
mvfd70 Registered User Join Date: Jan 2007 Location: Opdyke, IL Posts: 775	Re: what have you done this week ? FINALLY got my frame to the sandblaster. Should be done this weekend or early next week. I can't wait to get it back and put some paint on it. __________________ 1978 Chevrolet Silverado 3/4 ton 400 small block. 2000 F-250 Powerstroke 2002 GMC Yukon Denali XL

07-04-2009, 07:09 PM	#12
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: what have you done this week ? fixed the fuel sending unit in the 70. now the gas hand works! got bad gas in the 69. ugh. i guess that is next. what is the best way for getting water out? i do love working on them. __________________ members met: redbaron69, billsbowtie,nc67

07-05-2009, 10:26 AM	#14
72CST4x4 It's only a minor addiction Join Date: Oct 2002 Location: N Muskegon, MI Posts: 27	Re: what have you done this week ? Finished stripping the cab and pulled the cab from the frame on my latest project, '72 swb. Next step, taking the cab to the sandblaster.. __________________ 72 Blazer CST 4x4 72 Suburban K-10 72 B.B. 402 C-10 70 K-10 4 spd 1970 GMC 2500 with 24K actual miles Current project- 69 GMC swb

07-04-2009, 08:29 PM	#15
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: what have you done this week ? I worked from 6-10 pretty much every day, but got off early yesterday after a rig move. So today I helped my dad switch motors in his 68. The old 396 burned oil so we pulled it and put a .040 402 in it. other than that, just waiting for monday morning to lay down some pipe and pick up some pipe. __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

07-04-2009, 10:48 PM	#17
Elephanthead Registered User Join Date: Nov 2008 Location: Carmel, IN Posts: 187	Re: what have you done this week ? I went to the junk yard and pulled 3 seat belts, and installed them into my 67 C30. Shoulder belts make me feel a lot safer driving it. I also found a sweet saddle blanket seat cover for $2 bucks at the bone yard. It was hot so I didn't start my search for power steering. I also bought a cherry picker and engine stand for $82 bucks at a garage sale for future weekends.

07-04-2009, 11:38 PM	#18
Daves72'GMC Registered User Join Date: Mar 2003 Location: Asheville, N.C Posts: 952	Re: what have you done this week ? worked.



Register or Log In To remove these advertisements.

07-04-2009, 11:51 PM	#19
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: what have you done this week ? Moved into my house. What a pain in the ass that was! Ever thrown a $3,500 mattress off of a 3rd floor balcony? I have Haven't touched the truck in months except to drive it. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 07-04-2009 at 11:52 PM.

07-05-2009, 12:01 AM	#20
WorkinLonghorn Senior Member Join Date: Dec 2006 Location: Studio City, Calif. Posts: 2,883	Re: what have you done this week ? The week before last; New rear drums,shoes,hardware kits,wheel cylinders and one axle seal. Changed Diff lube. __________________ '69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme.

07-04-2009, 11:59 PM	#22
alexxwing Registered User Join Date: Jul 2009 Location: san jose CA Posts: 62	Re: what have you done this week ? me and my lil brother re did his hole brake sistem from master cylinder to lines wheel cylinders pads now his 64 went from stoping bad to stoping not so bad haha damn drum brakes ohh well at least they dont leak any more __________________ Smoke Tires, Not Drugs!

07-05-2009, 12:36 AM	#23
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: what have you done this week ? Well, I pulled my stereo out for the hundreth time to see if I can get the thumb drive to work, and will have my JY sway bar installed by tomorrow on my '67. Ya-hoo! __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

07-05-2009, 06:34 AM	#24
prairewolf Registered User Join Date: Oct 2005 Location: south dakota Posts: 1,895	Re: what have you done this week ? 1.paid 68c15 the balance of what I owed him, for his work on my Son's 67 CST. 2.drove it to gas station and added a little air to passenger side front michelin. 3.drove it east of town aways and bought fireworks. 4.got out and looked at it a few times and listended to it run. 5.called one of my Brothers on my cell and told him how much I dig this truck. 6,down shifted coming up to a stop sign and listened to the rear tires chirp. 7.realized again how fortunate I am to know Todd. 8. went to bed a happy camper. thats about it. ....... thanks Todd, you are one of the reasons life is good. kent __________________ eat,work,spend,sleep,repeat. Last edited by prairewolf; 07-05-2009 at 06:37 AM.

07-05-2009, 06:51 AM	#25
cparman sharp as a marble Join Date: Jan 2007 Location: atlantic beach,florida Posts: 1,082	Re: what have you done this week ? 1. disc brake install 1970 Cuda 440 2. 200r4 install & a/c compressor 83 Malibu wagon 3. fixed no start 69 Olds Cutlass 4. repaired dash lights, coolant leak, shifter problem 55 Chevy wagon 5. fixed no crank on 41 Lasalle convertible. Customer hooled the battery up backwards, now it cranks but will not start. Think he took out the pertronix module we installed a few years ago.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.