|
|
|
07-12-2009, 11:24 PM
|
#1 |
|
Registered User
 Join Date: Jul 2009
Location: Snellville, Georgia
Posts: 20
|
Panel Alignment Help
Just purchased a 71 swb fleetside and needing to align the panels,bed ,fenders hood you name it nothing is aligned.Did the cross measure between the two front fenders and core support almost 1 inch off.looking for specs or just ideas on getting panels aligned properly. Trying to get my pics to load havin a little trouble. Any help appreciated.
Last edited by thecov71; 07-13-2009 at 10:40 PM. |
|
|
|
07-12-2009, 11:39 PM
|
#2 |
|
Registered User
Join Date: May 2009
Location: Pemberton, BC
Posts: 1,075
|
Re: Panel Alignment Help
Welcome!
Something doesn't sound right if all the panels are misaligned. Pics would help. Probably make sure the cab is lined up and go from there.
__________________
My goal in life is to be as good a person as my dog already thinks I am - Unknown |
|
|
|
|
07-13-2009, 04:57 AM
|
#3 |
|
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
Re: Panel Alignment Help
If the cross measurement is off by an inch, then you may want to start by checking the frame out. Once you know the frame is ok then go with the cab alignment as mentioned.
Jim
__________________
1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC |
|
|
|
|
07-13-2009, 05:33 AM
|
#4 |
|
Special Order
  
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: Panel Alignment Help
Tell us more about your truck.Is it repaired or restored?Why you checked it and such.Does it drive straight?Was the truck all together and painted?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
|
|
|
07-13-2009, 07:35 AM
|
#5 |
|
Registered User
Join Date: Jul 2009
Location: Snellville, Georgia
Posts: 20
|
Re: Panel Alignment Help
Thanks for the replies I am going to take some pics today. I bought the truck as a running driving truck. It seem to drive fine and track straight.Some one has been working on the truck but I don't know who.The guy I bought it from was not very honest with me regarding it because when I got it home and really had the chance to look it over good I found several things wrong.When I picked the truck up to take home he told me he had changed the oil that weekend and when I got home I looked it over and he had not changed the oil so if he lied to me about something as small as that you know he lied to me about other things more important. So I guess I'm on my on with this truck.Ramble-Ramble -Ramble,sorry guys just alittle aggrevated.Truck is not painted, in primer but all there. Has a 350 w350 powerglide.I will get pics on today so you guys can tell me what you think.Thanks again.
Last edited by thecov71; 07-13-2009 at 07:37 AM. Reason: can't spell |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
