19,000 mile I-250 ENGINE WITH A/C & P/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BCOWANWHEELS · 07-29-2009, 04:23 PM

ANYBODY INTERESTED IN A 19,000 ORIGINAL MILAGE 250 i-6 COMPLETE ENGINE ? IT HAS FACTORY POWER STEERING AND I HAVE A FACTORY DEALER ADD ON A/C SETUP KIT FOR IT THAT HAS NEVER BEEN INSTALLED. ITS IN A 1970 CHEVT 1/2 TON AND STILL IN THE TRUCK SO BUYER CAN DRIVE IT BEFORE BUYING IT. PRICE IS $2000.00 obo FOR COMPLETE ENGINE.
BOB

jsmithbm · 07-29-2009, 10:03 PM

Let me know if you part it, I dont think i would. But ya never know. I would like the carb and some other stuff.
Is there anyway you could take a few photos of the other side, i am trying to setup my power steering on my L6.
thanks

468BIGBLOCK · 07-30-2009, 09:29 AM

was that price a typo??

BCOWANWHEELS · 07-30-2009, 05:27 PM

I wont be parting it out and price is not a type-o. Where you gonna find a original 6 in this condition. Even a crate engine is higher than this and its not complete. This is a cherry. It cost over 1000.00 bucks to overhaul a long block then it will run hot unless you install a 3 core rad because the cylinder walls are thin. I,ve been into 6 cyls. For 30 yrs. This engine and a ( dodge gas engine ) nv4500 trans along with 3.73 gears would be sweet...

jsmithbm · 07-30-2009, 07:10 PM

Thanks B.

Crispyr1 · 07-30-2009, 07:21 PM

u said an a/c kit that hasn't been installed? will it fit the 292? how much?

BCOWANWHEELS · 07-30-2009, 10:12 PM

sorry but i dont want to part it out
crispyr1, what kind of 6 cyl parts do you need ? i have a bumch of them jsmithbm ?
pm me a list and i,ll see if i can hook you up reasonable.
bob

07-29-2009, 04:23 PM	#1
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	19,000 mile I-250 ENGINE WITH A/C & P/S ANYBODY INTERESTED IN A 19,000 ORIGINAL MILAGE 250 i-6 COMPLETE ENGINE ? IT HAS FACTORY POWER STEERING AND I HAVE A FACTORY DEALER ADD ON A/C SETUP KIT FOR IT THAT HAS NEVER BEEN INSTALLED. ITS IN A 1970 CHEVT 1/2 TON AND STILL IN THE TRUCK SO BUYER CAN DRIVE IT BEFORE BUYING IT. PRICE IS $2000.00 obo FOR COMPLETE ENGINE. BOB Attached Images __________________ I BELIEVE IN JOHN 3:16

07-29-2009, 10:03 PM	#2
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: 19,000 mile I-250 ENGINE WITH A/C & P/S Let me know if you part it, I dont think i would. But ya never know. I would like the carb and some other stuff. Is there anyway you could take a few photos of the other side, i am trying to setup my power steering on my L6. thanks __________________ Learning as I go! -------------------------------------

07-30-2009, 09:29 AM	#3
468BIGBLOCK MEMBER OF THE JUNK MAN CLUB Join Date: Jul 2001 Location: paragould arkansas 72450 Posts: 425	Re: 19,000 mile I-250 ENGINE WITH A/C & P/S was that price a typo?? __________________ I LIKE 67-72 CHEVYS, I HAVE OWNED OVER 150 OF THEM IN THE LAST 25 YEARS..

07-30-2009, 05:27 PM	#4
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: 19,000 mile I-250 ENGINE WITH A/C & P/S I wont be parting it out and price is not a type-o. Where you gonna find a original 6 in this condition. Even a crate engine is higher than this and its not complete. This is a cherry. It cost over 1000.00 bucks to overhaul a long block then it will run hot unless you install a 3 core rad because the cylinder walls are thin. I,ve been into 6 cyls. For 30 yrs. This engine and a ( dodge gas engine ) nv4500 trans along with 3.73 gears would be sweet... __________________ I BELIEVE IN JOHN 3:16

07-30-2009, 07:10 PM	#5
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: 19,000 mile I-250 ENGINE WITH A/C & P/S Thanks B. __________________ Learning as I go! -------------------------------------

07-30-2009, 07:21 PM	#6
Crispyr1 Registered User Join Date: Jul 2009 Location: Orange Park, FL Posts: 114	Re: 19,000 mile I-250 ENGINE WITH A/C & P/S u said an a/c kit that hasn't been installed? will it fit the 292? how much?

07-30-2009, 10:12 PM	#7
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: 19,000 mile I-250 ENGINE WITH A/C & P/S sorry but i dont want to part it out crispyr1, what kind of 6 cyl parts do you need ? i have a bumch of them jsmithbm ? pm me a list and i,ll see if i can hook you up reasonable. bob __________________ I BELIEVE IN JOHN 3:16

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.