71-72 K10 front axle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chipflyer · 08-27-2009, 09:02 PM

I have a six lug front axle assembly from a 72 1/2 ton Chevy with 3.08 gears that I have decided not to use. $100 picked up here in Topeka. If you are headed to teeitups place to pick anything up I am just 5 miles southwest of him.

Jeff

duallyjams · 08-28-2009, 07:19 AM

You could part it out. The flat top knuckles go for around 65.

chipflyer · 08-31-2009, 01:49 PM

Not interested in parting it out, would just like to see it all go to someone who could use it.

TTT

decodan · 08-31-2009, 10:13 PM

Hey Jeff,

If it were paid for how long would you baby sit it. I don't know how it would be before I could make the trip. Could be a month or little more.
If you can do that I would take it.
Let me know, Dan

chipflyer · 08-31-2009, 10:33 PM

Hi Dan,
If paid for it could stay for a couple of months, max. I am just a few miles north of I-70, easy to find and Teeitup is just up the road 5 minutes if you are looking for other parts.
Let me know.

Jeff

decodan · 08-31-2009, 10:36 PM

Hey Jeff,

I'll take it, just one silly question. I am pretty sure this will also fit the front of a Suburban, right?
If so, how do you want payment, Paypal OK?
Dan

chipflyer · 08-31-2009, 10:39 PM

PM sent Dan. Far as I know it should bolt right up, but I am not 100% on that.

Jeff

decodan · 08-31-2009, 10:47 PM

Jeff,

Haven't gotten the PM yet. I also sent you one.
I'll gamble that it will work. I have a drum brake 3.08 in my Burb so worst case is i have it for parts.
So, that means it is a for sure, "I'll Take It."
Dan

decodan · 08-31-2009, 10:53 PM

Hey Jeff,
Paypal sent. PM me your address and phone and I'll let you know asap when I can come get it. Now, I'll go and ask if it fits for sure.
Thanks,
Dan

chipflyer · 08-31-2009, 10:58 PM

Will do Dan. Axle is sold.
Thanks

**BAD4X4** · 08-31-2009, 11:52 PM

Dan it will built right in no problem. Just have to change brake lines.

decodan · 09-01-2009, 08:16 AM

Thank you,
Dan

08-27-2009, 09:02 PM	#1
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	71-72 K10 front axle I have a six lug front axle assembly from a 72 1/2 ton Chevy with 3.08 gears that I have decided not to use. $100 picked up here in Topeka. If you are headed to teeitups place to pick anything up I am just 5 miles southwest of him. Jeff Attached Images __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241. Last edited by chipflyer; 08-27-2009 at 09:05 PM.

08-28-2009, 07:19 AM	#2
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 71-72 K10 front axle You could part it out. The flat top knuckles go for around 65. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

08-31-2009, 01:49 PM	#3
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: 71-72 K10 front axle Not interested in parting it out, would just like to see it all go to someone who could use it. TTT __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

08-31-2009, 10:13 PM	#4
decodan C-20 Long Stroker Join Date: Oct 2005 Location: Frohna, MO Posts: 137	Re: 71-72 K10 front axle Hey Jeff, If it were paid for how long would you baby sit it. I don't know how it would be before I could make the trip. Could be a month or little more. If you can do that I would take it. Let me know, Dan __________________ "A Hand Shake Is Your Word." Decodan ************************ 1951 Chevrolet Suburban 1952 GMC Suburban 1963 Mercury Comet 2-dr (Sorry, I know) 1963 Mercury Comet 2-dr Parts Car, (better than what I originally started with) 2010 F-150 4WD 2015 Subaru Outback (what the hey, got to have one that is not a gas hog)

08-31-2009, 10:33 PM	#5
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: 71-72 K10 front axle Hi Dan, If paid for it could stay for a couple of months, max. I am just a few miles north of I-70, easy to find and Teeitup is just up the road 5 minutes if you are looking for other parts. Let me know. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

08-31-2009, 10:36 PM	#6
decodan C-20 Long Stroker Join Date: Oct 2005 Location: Frohna, MO Posts: 137	Re: 71-72 K10 front axle Hey Jeff, I'll take it, just one silly question. I am pretty sure this will also fit the front of a Suburban, right? If so, how do you want payment, Paypal OK? Dan __________________ "A Hand Shake Is Your Word." Decodan ************************ 1951 Chevrolet Suburban 1952 GMC Suburban 1963 Mercury Comet 2-dr (Sorry, I know) 1963 Mercury Comet 2-dr Parts Car, (better than what I originally started with) 2010 F-150 4WD 2015 Subaru Outback (what the hey, got to have one that is not a gas hog)

08-31-2009, 10:39 PM	#7
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: 71-72 K10 front axle PM sent Dan. Far as I know it should bolt right up, but I am not 100% on that. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241. Last edited by chipflyer; 08-31-2009 at 10:43 PM.

08-31-2009, 10:47 PM	#8
decodan C-20 Long Stroker Join Date: Oct 2005 Location: Frohna, MO Posts: 137	Re: 71-72 K10 front axle Jeff, Haven't gotten the PM yet. I also sent you one. I'll gamble that it will work. I have a drum brake 3.08 in my Burb so worst case is i have it for parts. So, that means it is a for sure, "I'll Take It." Dan __________________ "A Hand Shake Is Your Word." Decodan ************************ 1951 Chevrolet Suburban 1952 GMC Suburban 1963 Mercury Comet 2-dr (Sorry, I know) 1963 Mercury Comet 2-dr Parts Car, (better than what I originally started with) 2010 F-150 4WD 2015 Subaru Outback (what the hey, got to have one that is not a gas hog)

08-31-2009, 10:53 PM	#9
decodan C-20 Long Stroker Join Date: Oct 2005 Location: Frohna, MO Posts: 137	Re: 71-72 K10 front axle Hey Jeff, Paypal sent. PM me your address and phone and I'll let you know asap when I can come get it. Now, I'll go and ask if it fits for sure. Thanks, Dan __________________ "A Hand Shake Is Your Word." Decodan ************************ 1951 Chevrolet Suburban 1952 GMC Suburban 1963 Mercury Comet 2-dr (Sorry, I know) 1963 Mercury Comet 2-dr Parts Car, (better than what I originally started with) 2010 F-150 4WD 2015 Subaru Outback (what the hey, got to have one that is not a gas hog)

08-31-2009, 10:58 PM	#10
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: 71-72 K10 front axle Will do Dan. Axle is sold. Thanks __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

08-31-2009, 11:52 PM	#11
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Re: 71-72 K10 front axle Dan it will built right in no problem. Just have to change brake lines. __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

09-01-2009, 08:16 AM	#12
decodan C-20 Long Stroker Join Date: Oct 2005 Location: Frohna, MO Posts: 137	Re: 71-72 K10 front axle Thank you, Dan __________________ "A Hand Shake Is Your Word." Decodan ************************ 1951 Chevrolet Suburban 1952 GMC Suburban 1963 Mercury Comet 2-dr (Sorry, I know) 1963 Mercury Comet 2-dr Parts Car, (better than what I originally started with) 2010 F-150 4WD 2015 Subaru Outback (what the hey, got to have one that is not a gas hog)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.