Back-up Lights - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 01-13-2003, 09:20 AM

Can some one tell me how to adjust the reverse light switch on a tilt ...There is only one switch on the colum down towards the firewall ....I can get the lights to come on in Neutral but not reverse ....

THANKS LUKE

JimKshortstep4x4 · 01-13-2003, 09:39 AM

Loosen the two mounting screws and rotate the switch clockwise
by small increments as you try it. Recheck and make sure that neutral safety and park positions still work.

Jim

01-13-2003, 09:20 AM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Back-up Lights Can some one tell me how to adjust the reverse light switch on a tilt ...There is only one switch on the colum down towards the firewall ....I can get the lights to come on in Neutral but not reverse .... THANKS LUKE __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-13-2003, 09:39 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Loosen the two mounting screws and rotate the switch clockwise by small increments as you try it. Recheck and make sure that neutral safety and park positions still work. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.