Door Stricker Plates - what to do?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

atp · 09-10-2009, 09:10 PM

I have come to the point that I need to decide what to do about my door strickers. I am curious what most do on "show" trucks. I know you can paint them but they tend to scratch. I thought about having them coated? Anyone have any ideas or pics would be nice!!

Willys47 · 09-10-2009, 09:12 PM

maybe get them cadmium plating that should hold up and look good

Rack Man · 09-10-2009, 11:03 PM

I just had mine powder-coated the other day...I just picked a silver color that resembled cad-plating somewhat....I don't like the unpainted look even though it may be correct!

mclairmo · 09-11-2009, 02:23 AM

Just buy new ones. They're only about $18 each from the Truck and Car Shop in Orange, CA and that's likely cheaper and better than any coating or plating you can have done and will look great and be new. Paint or powder coat will scratch off eventually.

Tx Firefighter · 09-11-2009, 07:49 AM

Quote:

Originally Posted by mclairmo

Just buy new ones. They're only about $18 each from the Truck and Car Shop in Orange, CA and that's likely cheaper and better than any coating or plating you can have done and will look great and be new. Paint or powder coat will scratch off eventually.

I'll take a powdercoated original over a low quality Chinese repop part.

rwolf9653 · 09-11-2009, 07:59 AM

Quote:

Originally Posted by Tx Firefighter

I'll take a powdercoated original over a low quality Chinese repop part.

X2 Well said!

Rack Man · 09-11-2009, 08:34 AM

Quote:

Originally Posted by Tx Firefighter

I'll take a powdercoated original over a low quality Chinese repop part.

X3.....Always use original whenever possible!...99% of Repop stuff is crap IMO (though I have been forced to buy quite a bit of it myself).....

Quote:

I have new ones. Just not sure I like the "shinny" look. Open the door and it is all you see.

Yea I don't know about that shiny gold look...especially on a show truck!.... A lot of guys simply paint em body color!.....I myself just though I'd go for a little contrast.....

myoldchevytruck · 09-11-2009, 08:42 AM

Quote:

Originally Posted by Tx Firefighter

I'll take a powdercoated original over a low quality Chinese repop part.

Yep. Original over repop part, everyday!

atp · 09-11-2009, 08:29 AM

Quote:

Originally Posted by mclairmo

Just buy new ones. They're only about $18 each from the Truck and Car Shop in Orange, CA and that's likely cheaper and better than any coating or plating you can have done and will look great and be new. Paint or powder coat will scratch off eventually.

I have new ones. Just not sure I like the "shinny" look. Open the door and it is all you see.

turp mcspray · 09-11-2009, 09:54 AM

Has anyone used the repo ones? Can any of the vendors comment on the quality? Thanks

atp · 09-11-2009, 10:07 AM

Quote:

Originally Posted by turp mcspray

Has anyone used the repo ones? Can any of the vendors comment on the quality? Thanks

The repos I have fit and work good. It is just the plate so there isn't much that can go wrong. I would agree about using original sheet metal but on a part like this I guess you can get away with it - IMO of course...

turp mcspray · 09-11-2009, 10:21 AM

Thanks for the response. I restore cars for a living, so I know a lot of repo stuff is less than great. BUT a lot of stuff is good quality and some is better than original. It's always nice to hear from someone who has used a new part, and what they thought about it before buying it yourself.

09-10-2009, 09:10 PM	#1
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Door Stricker Plates - what to do?? I have come to the point that I need to decide what to do about my door strickers. I am curious what most do on "show" trucks. I know you can paint them but they tend to scratch. I thought about having them coated? Anyone have any ideas or pics would be nice!!

09-10-2009, 09:12 PM	#2
Willys47 Registered User Join Date: Dec 2007 Location: Nanaimo B.C. Posts: 604	Re: Door Stricker Plates - what to do?? maybe get them cadmium plating that should hold up and look good __________________ I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!!

09-10-2009, 11:03 PM	#3
Rack Man Registered User Join Date: Sep 2008 Location: Tempe, AZ Posts: 770	Re: Door Stricker Plates - what to do?? I just had mine powder-coated the other day...I just picked a silver color that resembled cad-plating somewhat....I don't like the unpainted look even though it may be correct! __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288 Last edited by Rack Man; 09-10-2009 at 11:04 PM.

09-11-2009, 02:23 AM	#4
mclairmo Registered User Join Date: Jan 2006 Location: Take Off Posts: 1,908	Re: Door Stricker Plates - what to do?? Just buy new ones. They're only about $18 each from the Truck and Car Shop in Orange, CA and that's likely cheaper and better than any coating or plating you can have done and will look great and be new. Paint or powder coat will scratch off eventually.

09-11-2009, 09:54 AM	#10
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: Door Stricker Plates - what to do?? Has anyone used the repo ones? Can any of the vendors comment on the quality? Thanks __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

09-11-2009, 10:21 AM	#12
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: Door Stricker Plates - what to do?? Thanks for the response. I restore cars for a living, so I know a lot of repo stuff is less than great. BUT a lot of stuff is good quality and some is better than original. It's always nice to hear from someone who has used a new part, and what they thought about it before buying it yourself. __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.