|
09-20-2009, 03:20 PM | #1 |
The Black Pearl
Join Date: Apr 2009
Location: Brooks Alberta Canada
Posts: 63
|
pretty front end
I am ready to powdercoat the frame and front end parts on my 68 LWB. Just wondering what everybody does with their Ball Joints, Pitman arm, spindles, etcc... Can these be powdercoated aswell ??? or do i have to coat them with paint and or p.o.r?
|
09-20-2009, 05:53 PM | #2 | |
just can't cover up my redneck
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
|
Re: pretty front end
The "solid" parts will be fine as long as you keep the powder off of the "machined surfaces" Spindles, center link, etc.
Things with "moving parts", ball-joints, tie-rods, idler arm, etc. may give you problems....especially those that need grease (and already have some in them). You might contact a member called TxFirefighter . He does custom powder coating. I'm sure that he can advise you about what can be done. He may be willing to "baby-sit" some parts that a big shop wouldn't bother with?
__________________
You can review the site's rules here. Quote:
Bad planning on your part does not necessarily constitute an instant emergency on my part.... The great thing about being a pessimist is that you are either pleasantly surprised or right. |
|
09-21-2009, 10:21 PM | #3 |
The Black Pearl
Join Date: Apr 2009
Location: Brooks Alberta Canada
Posts: 63
|
Re: pretty front end
Thanks for the info!
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|