|
|
|
09-23-2009, 08:56 AM
|
#1 |
|
Registered User
 
Join Date: Mar 2008
Location: Kitchener, Ontario
Posts: 487
|
Camaro Control Arms
Anybody out there know whether Camaro/Firebird control arms will work with our frames? Alternatively, even just the coil springs? I have looked through all the old posts for anything on disc brakes/spindles, it looks like everyone is just using stock truck parts from 73-up for front discs/springs. I have a 68 GMC, I found a set of control arms off a 69-74 Camaro/Firebird/Nova/Acadian, haven't gone to look at them yet, was waiting until I could pull a set off another truck. Thanks.
|
|
|
|
09-23-2009, 10:22 AM
|
#2 |
|
Registered User
Join Date: May 2006
Location: Jonesboro, AR
Posts: 916
|
Re: Camaro Control Arms
I'll go out on a limb here and say they absolutely will not work.
|
|
|
|
|
09-23-2009, 02:58 PM
|
#3 |
|
Registered User
Join Date: Feb 2008
Location: Albuquerque
Posts: 359
|
Re: Camaro Control Arms
Chevy truck uppers have a centered ball joint and Camaros are forward.
The rest could be technical paper of suspension design Mick |
|
|
|
|
09-23-2009, 03:01 PM
|
#4 |
|
Registered User
Join Date: Jan 2006
Location: Take Off
Posts: 1,908
|
Re: Camaro Control Arms
I have a 67 Camaro and a 68 C10 and it appears that the arms will not interchange and work properly without lots of fabrication.
|
|
|
|
|
09-23-2009, 03:59 PM
|
#5 |
|
Registered User
Join Date: Mar 2008
Location: Kitchener, Ontario
Posts: 487
|
Re: Camaro Control Arms
I was just throwing it out there....any ideas if the springs will fit in truck control arms? They both appear to be a 5 inch bottom end spring, obviously I need to figure out spring rate/ride height/compressed height/unsprung weight, weight of front half of truck, etc. I was looking at the ones from Moroso and was hoping to use a pair.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
