Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
09-29-2009, 05:43 PM | #1 |
Registered User
Join Date: May 2009
Location: Charleston SC
Posts: 290
|
possible 1962 Extended cab project?
Ok like I have previously stated in another thread.. I'm looking to purchase a 1962 Extended cab project. My question is how much do yal think its going to take? Again its a working project still needs some work....
__________________
1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40. |
09-29-2009, 05:45 PM | #2 |
Registered User
Join Date: May 2009
Location: Charleston SC
Posts: 290
|
Re: possible 1962 Extended cab project?
inside pics
__________________
1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40. |
09-29-2009, 05:46 PM | #3 |
Registered User
Join Date: May 2009
Location: Charleston SC
Posts: 290
|
Re: possible 1962 Extended cab project?
it has a late 90's ext cab frame that goes with it...
__________________
1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40. Last edited by 61TWUK; 09-29-2009 at 05:51 PM. |
09-29-2009, 07:31 PM | #4 |
Registered User
Join Date: May 2009
Location: Charleston SC
Posts: 290
|
Re: possible 1962 Extended cab project?
Driver's and pass extended door
__________________
1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40. |
09-29-2009, 07:42 PM | #5 |
chevy only
Join Date: Sep 2006
Location: Phoenix, AZ
Posts: 6,619
|
Re: possible 1962 Extended cab project?
Gooood start, what he want for it?,
__________________
CHEVY ONLY... Nothin Else ! |
09-29-2009, 07:41 PM | #6 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: possible 1962 Extended cab project?
Are you asking how much it will take to complete?
That is going to be very subjective if you are asking what it is worth in its current state.... You need to be a supporting member to post a WIW
__________________
CHEVY ONLY |
09-29-2009, 07:45 PM | #7 |
Registered User
Join Date: May 2009
Location: Charleston SC
Posts: 290
|
Re: possible 1962 Extended cab project?
Yea I've been meaning to do that for awhile now... hold on...
__________________
1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40. |
09-29-2009, 07:52 PM | #8 |
Registered User
Join Date: May 2009
Location: Charleston SC
Posts: 290
|
Re: possible 1962 Extended cab project?
K there now WIW... haha
__________________
1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40. |
09-29-2009, 08:06 PM | #9 |
Registered User
Join Date: May 2009
Location: Charleston SC
Posts: 290
|
Re: possible 1962 Extended cab project?
Dino... PM sent.
__________________
1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40. |
09-29-2009, 08:09 PM | #10 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: possible 1962 Extended cab project?
please share
personally I would tell them to keep the 90 frame and use an older frame. That being said, I wouldn't give more than $1000 for it all and less depending on the shape of all the sheet metal. You have to figure out if that will get you ahead. Were the cabs joined properly or are you going to have to rework it?
__________________
CHEVY ONLY Last edited by joe231; 09-29-2009 at 08:12 PM. |
09-29-2009, 10:39 PM | #11 | |
Registered User
Join Date: May 2009
Location: Charleston SC
Posts: 290
|
Re: possible 1962 Extended cab project?
Quote:
__________________
1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40. |
|
09-29-2009, 11:05 PM | #12 |
Registered User
Join Date: Mar 2009
Location: CA
Posts: 814
|
Re: possible 1962 Extended cab project?
Cant say Id pay much for that piece. Joe is very generous to offer a G for it.
|
09-29-2009, 11:27 PM | #13 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: possible 1962 Extended cab project?
you are probably right
__________________
CHEVY ONLY |
09-29-2009, 11:28 PM | #14 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: possible 1962 Extended cab project?
the more I look at it the more I see that is wrong. the floor looks awful (probably needs to be ripped out and done right or it will be a rust bucket in a few years, there isn't any rear rockers, the roof is gonna be a pain......I'm not saying it can't be done.....just that it still needs lots of work
__________________
CHEVY ONLY Last edited by joe231; 09-29-2009 at 11:35 PM. |
09-30-2009, 03:11 AM | #15 |
Senior Member
Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: possible 1962 Extended cab project?
looks like a crude job and a long given up on project, I would not mess with it for any cost, if iit was done wrong..there may not be much left when you try to repair it, I think you would be better off getting 2 fresh cabs and start from scratch
|
10-07-2009, 03:11 PM | #16 |
Registered User
Join Date: May 2009
Location: Charleston SC
Posts: 290
|
Re: possible 1962 Extended cab project?
well i went and saw this truck in person... its a starter project.... for someone I might pass on it...
On a side note these guys have a TON of stuff: trucks, hoods, fenders.... they have subs, crew cabs, bbw's, sbw's, fleetsides, and steps man like i said before you think you might need it they probably have it...
__________________
1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40. |
10-07-2009, 03:15 PM | #17 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: possible 1962 Extended cab project?
Arent they in East Texas? I heard they wont part with the CC's
|
10-07-2009, 03:29 PM | #18 |
Registered User
Join Date: May 2009
Location: Charleston SC
Posts: 290
|
Re: possible 1962 Extended cab project?
They are in a little town named Leonard TX, and yes they won't part with the Crew cabs .... but I thought I would share...
__________________
1961 Apache SWB/SBW for now... Built 327 You need two tools in life: duct tape and WD-40. If it moves and it shouldn't, you use duct tape. If it doesn't move and it should, you use WD-40. |
08-15-2010, 12:30 AM | #19 |
KOFFIN DRAGGER
Join Date: Jan 2008
Location: st.anthony Idaho
Posts: 864
|
Re: possible 1962 Extended cab project?
WOW! After seeing these pics, I'm really glad I didnt buy that thing, then drive 1700 miles to find a giant mess, then drive home without it. I've bought that thing 4 times and had the deal go south in one way or another everytime, blessing in disquise.
__________________
If the life I live dont kill me, then I guess I'll never die! New updated stuff at www.kdrodworks.com My site still needs help, web guys and gals pm me. the best guys in the whole world: sweet70beast, jonzcustomshop, runninlow, captainfab, and the one I havent met yet, joe231 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|