new cowl hood is trash!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68_c10_on20s · 01-20-2003, 01:10 PM

well you boys wont believe the stupid thing i did yesterday i had some friends over and acting like a fool we put on my new steel cowl hood just to see what it lokked like the took it for a ride around the block forgot to bolt it up in the front and she went flying at about 30 miles an hr straight up and the strait down and bend to hell now its gonna take alot of work to make it look good agiain even if i can....it must have been the budwieser that made me do it

yellowgmc · 01-20-2003, 01:15 PM

oh man! that sucks. yeah i lost a topper like that. put it on all exited and forgot to put on the clamps. got on the highway and BOOM SPLAT. it hurts

barn9 · 01-20-2003, 01:16 PM

DOH!

72C10chevy4x4 · 01-20-2003, 01:24 PM

funny story about my dad's topper that flew off. he was driving down the road at 55mph and it flew off-but it spun around like a top and actually landed correct side up! other then a bent corner it was ok and he put it back on. I wouldn't have believed it could happen if it was not my dad this happened to.

sorry to hear about your hood-I'm sure that hurts! sometimes we don't clearly enough after a couple of beers. I usually describe my projects in terms of beers. for example, welding in my front and rear floor pan the other day was a three beer project (not quite done yet). How many beers is it going to take to fix your hood? :-)

mikep · 01-20-2003, 01:28 PM

A three beer project? It only took you 9 minutes to weld in a front and rear floor pan ? You rock !

72C10chevy4x4 · 01-20-2003, 01:41 PM

I count it as a separate 'project' when I come back the next night to work on the previous 'project' (still have more to do on the floor pan). Hey-it works for me-I feel like I'm completing small projects and the overall project doesn't seem to be moving as slowly.

jmil1974 · 01-20-2003, 02:06 PM

OW!!! Sorry to hear that, Steve. I've been guilty of moves like that before, as my wife is quick to point out.

ebfabman · 01-20-2003, 02:30 PM

I had to dodge a pretty good size boat one time when it lifted off its trailer at about 70 mph

Another thing I saw an 18 wheeler run over and scatter 2 jet skies on the innerstate after sliding out of the back of a pickup at about 65mph

Hope this makes you feel better

Slammed67 · 01-20-2003, 03:05 PM

Dude, that sucks....... but damn it's funny! I could just imaging the look on your face when it went airborne!

68_c10_on20s · 01-20-2003, 03:27 PM

hers a pict of the damage

68_c10_on20s · 01-20-2003, 03:27 PM

another

68_c10_on20s · 01-20-2003, 03:30 PM

well i guess this just gives me more body work practice,i think the only hard part will be around the middle in the front good thing i got plenty of bondo.....it looks like its gonna be about a 12 pack project

chevy2racr · 01-20-2003, 04:05 PM

ouch for sure, and Mike, it takes you 9 Min for 3 beers? slowpoke

Castiron9 · 01-20-2003, 06:58 PM

Yea.......That .................LITE....................Beer will do it every Time...........................

68 with 350 TPI · 01-20-2003, 07:03 PM

Oh that sucks man

I lost a glass hood like that on my camaro one time

Just say the UPS man did it

just kidding and I hope you get it fixed soon.

jay6891 · 01-20-2003, 07:04 PM

Ow,gotta suck. Before you modified it, haw did it fit? Looking for a 4" cowl for my 71 clip. If it fit good, what brand was it?

Reumster · 01-20-2003, 07:06 PM

That really sucks. Goes to show taking your time pays off. Most of the time I stand back inspect my work be fore I try it. It must have taken a hour after completing install of my new motor, to look every thing over, and then work the nerve to turn the key for the first time! LOL

But I had a shop built hard tonnue cover on my 68 stop side, a freind and me built in high school. It was a drop on, and fit tight with a inner frame that dropped into the box, made of wood. Pretty heavy. Well I was going down the freeway about 80 and a big wind gust came up from the side. It blew off and flew 80 feet off the road over a fence! LOL Broke the corners but it was fixable

70 Jimmy · 01-20-2003, 07:17 PM

Dude, give it up! No, really, give the hood to me so I can modify it for my truck. It's too far gone to be fixed. J/K Just take your time and take one section at a time and you should be OK. I'm no bodyman though, it's just what my friend (a very talented bodyman) tells me.

72shadetree · 01-21-2003, 12:16 AM

man that bites

done a brand new 4 core rad. cause i couldnt wait till i got the hold downs

Lippyp · 01-21-2003, 06:02 AM

I used to work in the late 1980's for an office furniture renovation company. I had just collected a van full of office chairs to be re-covered, must have got distracted at the last minute. I jumped into my van, drove slowly out of the car park and hauled ass out onto the main road, where I was met by a rolling rumbling noise, floowed by a loud crash and lots of honking. I looked in my mirror and realised I had forgotten to tie my load in and shut the doors properly and as I accelerated they had all peeled off out of the back door onto the road, along with the large wooden box containg all my sales literature. Kinda like a destroyer laying down a pattern of depth charges in an old war movie! Fortunately they were all going to be renovated and recovered so no harm was done and I even managed to miss everybody behind me, just a little bent pride! Needless to say it did get back to the boss and I got some real s**t from all the guys at the office!

**Yukon Jack** · 01-21-2003, 11:25 AM

Man o man, what a bummer!

68_c10_on20s · 01-22-2003, 12:12 PM

well i guess this gives me the chance to really get what i want im gonna try to cut out the center and add 3 more inches to each side to make it a 5 inch cowl the more i look at it the more i say why not...

casey · 01-25-2003, 05:17 AM

I feel your pain man!but I think that hoods toast.I was in the back of my truck one time putting tools in, the truck was on a slope, I was warming it up with the emergency brake on, when I heard that gluuun, well you know what that was, yeh the f#$@king brake let go. I jumped out and grabbed the door handle trying to get in, but it started to roll to fast, so I just skidded with the truck trying to stop it , Like I could (not)well right into my new ladder rack, just mangled the *****, Man I know the feeling, You can bet a few beer went down after that.

Oborny71 · 01-25-2003, 12:07 PM

yeah that totally sucks! and after you spent all that money on it! -sorry, not trying to make you feel bad, my sympathy for ya.

01-20-2003, 01:10 PM	#1
68_c10_on20s Registered User Join Date: Aug 2002 Location: Waxahachie TX Posts: 773	new cowl hood is trash!!! well you boys wont believe the stupid thing i did yesterday i had some friends over and acting like a fool we put on my new steel cowl hood just to see what it lokked like the took it for a ride around the block forgot to bolt it up in the front and she went flying at about 30 miles an hr straight up and the strait down and bend to hell now its gonna take alot of work to make it look good agiain even if i can....it must have been the budwieser that made me do it

01-20-2003, 01:15 PM	#2
yellowgmc Getting cabin fever?!?!?! Join Date: Oct 2002 Location: chisholm, mn Posts: 1,679	oh man! that sucks. yeah i lost a topper like that. put it on all exited and forgot to put on the clamps. got on the highway and BOOM SPLAT. it hurts __________________ Member of the Discs Up Front Club 1972 GMC 1500 1994 F-150 XL 4x4 Tact is for people not whitty enough to be sarcastic

01-20-2003, 01:16 PM	#3
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	DOH! __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

01-20-2003, 01:28 PM	#5
mikep Used to have a truck Join Date: May 2002 Location: port orchard WA Posts: 1,552	A three beer project? It only took you 9 minutes to weld in a front and rear floor pan ? You rock ! __________________ No truck :-(

01-20-2003, 02:06 PM	#7
jmil1974 Ain't we cute? Join Date: May 2002 Location: Friendswood, TX Posts: 700	OW!!! Sorry to hear that, Steve. I've been guilty of moves like that before, as my wife is quick to point out. __________________ 69 C10 2WD LWB Fleet 350/350 power front disc conversion (6 lug disc kit from gmcpauls) and new engine, PS, A/C, fresh fluids, SHE DRIVES! FOR SALE $3900

01-20-2003, 01:24 PM	#4
72C10chevy4x4 UK Wildcat Fan! Join Date: Oct 2002 Location: Dover, DE Posts: 515	funny story about my dad's topper that flew off. he was driving down the road at 55mph and it flew off-but it spun around like a top and actually landed correct side up! other then a bent corner it was ok and he put it back on. I wouldn't have believed it could happen if it was not my dad this happened to. sorry to hear about your hood-I'm sure that hurts! sometimes we don't clearly enough after a couple of beers. I usually describe my projects in terms of beers. for example, welding in my front and rear floor pan the other day was a three beer project (not quite done yet). How many beers is it going to take to fix your hood? :-)

01-20-2003, 01:41 PM	#6
72C10chevy4x4 UK Wildcat Fan! Join Date: Oct 2002 Location: Dover, DE Posts: 515	I count it as a separate 'project' when I come back the next night to work on the previous 'project' (still have more to do on the floor pan). Hey-it works for me-I feel like I'm completing small projects and the overall project doesn't seem to be moving as slowly.

01-20-2003, 02:30 PM	#8
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,488	I had to dodge a pretty good size boat one time when it lifted off its trailer at about 70 mph Another thing I saw an 18 wheeler run over and scatter 2 jet skies on the innerstate after sliding out of the back of a pickup at about 65mph Hope this makes you feel better

01-20-2003, 03:05 PM	#9
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Dude, that sucks....... but damn it's funny! I could just imaging the look on your face when it went airborne! __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

01-20-2003, 03:27 PM	#10
68_c10_on20s Registered User Join Date: Aug 2002 Location: Waxahachie TX Posts: 773	hood hers a pict of the damage Attached Images

01-20-2003, 03:27 PM	#11
68_c10_on20s Registered User Join Date: Aug 2002 Location: Waxahachie TX Posts: 773	another Attached Images

01-20-2003, 03:30 PM	#12
68_c10_on20s Registered User Join Date: Aug 2002 Location: Waxahachie TX Posts: 773	well i guess this just gives me more body work practice,i think the only hard part will be around the middle in the front good thing i got plenty of bondo.....it looks like its gonna be about a 12 pack project

01-20-2003, 04:05 PM	#13
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	ouch for sure, and Mike, it takes you 9 Min for 3 beers? slowpoke __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

01-20-2003, 06:58 PM	#14
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Yea.......That .................LITE....................Beer will do it every Time...........................

01-20-2003, 07:03 PM	#15
68 with 350 TPI Registered User Join Date: May 2002 Location: Wingate NC Posts: 456	Oh that sucks man I lost a glass hood like that on my camaro one time Just say the UPS man did it just kidding and I hope you get it fixed soon. __________________ Life is good with a 6-71 supercharged 355 in a 72 camaro



Register or Log In To remove these advertisements.

01-20-2003, 07:04 PM	#16
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	Ow,gotta suck. Before you modified it, haw did it fit? Looking for a 4" cowl for my 71 clip. If it fit good, what brand was it? __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

01-20-2003, 07:06 PM	#17
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	That really sucks. Goes to show taking your time pays off. Most of the time I stand back inspect my work be fore I try it. It must have taken a hour after completing install of my new motor, to look every thing over, and then work the nerve to turn the key for the first time! LOL But I had a shop built hard tonnue cover on my 68 stop side, a freind and me built in high school. It was a drop on, and fit tight with a inner frame that dropped into the box, made of wood. Pretty heavy. Well I was going down the freeway about 80 and a big wind gust came up from the side. It blew off and flew 80 feet off the road over a fence! LOL Broke the corners but it was fixable __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

01-20-2003, 07:17 PM	#18
70 Jimmy aka Crusher, Crushergmc Join Date: Mar 2000 Location: Oregon Posts: 1,834	Dude, give it up! No, really, give the hood to me so I can modify it for my truck. It's too far gone to be fixed. J/K Just take your time and take one section at a time and you should be OK. I'm no bodyman though, it's just what my friend (a very talented bodyman) tells me. __________________ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious"

01-21-2003, 12:16 AM	#19
72shadetree KEEP ON TRUCKING Join Date: Sep 2000 Location: martinsville va Posts: 2,563	man that bites done a brand new 4 core rad. cause i couldnt wait till i got the hold downs __________________ 72 cheyenne 2wd lwb 71 k20 sons bassett va

01-21-2003, 06:02 AM	#20
Lippyp English Chevy Owner Join Date: May 2002 Location: Shropshire, UK/ Lot, France Posts: 1,848	I used to work in the late 1980's for an office furniture renovation company. I had just collected a van full of office chairs to be re-covered, must have got distracted at the last minute. I jumped into my van, drove slowly out of the car park and hauled ass out onto the main road, where I was met by a rolling rumbling noise, floowed by a loud crash and lots of honking. I looked in my mirror and realised I had forgotten to tie my load in and shut the doors properly and as I accelerated they had all peeled off out of the back door onto the road, along with the large wooden box containg all my sales literature. Kinda like a destroyer laying down a pattern of depth charges in an old war movie! Fortunately they were all going to be renovated and recovered so no harm was done and I even managed to miss everybody behind me, just a little bent pride! Needless to say it did get back to the boss and I got some real s**t from all the guys at the office! __________________ Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission

01-21-2003, 11:25 AM	#21
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Man o man, what a bummer! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

01-22-2003, 12:12 PM	#22
68_c10_on20s Registered User Join Date: Aug 2002 Location: Waxahachie TX Posts: 773	hood well i guess this gives me the chance to really get what i want im gonna try to cut out the center and add 3 more inches to each side to make it a 5 inch cowl the more i look at it the more i say why not...

01-25-2003, 05:17 AM	#23
casey Registered User Join Date: Jan 2003 Location: Kelowna B.C. Canada Posts: 2,048	I feel your pain man!but I think that hoods toast.I was in the back of my truck one time putting tools in, the truck was on a slope, I was warming it up with the emergency brake on, when I heard that gluuun, well you know what that was, yeh the f#$@king brake let go. I jumped out and grabbed the door handle trying to get in, but it started to roll to fast, so I just skidded with the truck trying to stop it , Like I could (not)well right into my new ladder rack, just mangled the *****, Man I know the feeling, You can bet a few beer went down after that.

01-25-2003, 12:07 PM	#24
Oborny71 Registered User Join Date: Apr 2001 Location: Lincoln, Nebraska Posts: 587	yeah that totally sucks! and after you spent all that money on it! -sorry, not trying to make you feel bad, my sympathy for ya. __________________ 67 Chevy SWB - goal of a 1,000 hp weekend cruiser

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.