How do you modify 5" gauge to fit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

buildinga55 · 11-14-2009, 07:43 PM

I am planning on using a 5" gauge set like a Dolphin or something along that line. I understand you have to do some modifications to get them to fit the original stainless rings. Anyone have any articles or instructions on how to do the modification so the 5" gauges will fit a 48? Thanks

jeffs51chevy · 11-14-2009, 10:37 PM

Check out Sarge's GMC/s10 swap or Houston54's thread. I thought Houston54 did it originally, but Sarge has a nice write up on the proceedure.

Others will chime in if I'm wrong

Jeff

Dan Bowles · 11-20-2009, 01:08 AM

I've got one over on the HAMB and Stovebolt. I put my son's Autometer's into stock housings.

Just found out that another company referenced my tech post when someone approached them to do something similar. They just sent him a link! I'm flattered, now send me some gauges!

http://www.jalopyjournal.com/forum/s...d.php?t=269446

I believe Houston54's link is in my thread as well.

buildinga55 · 11-20-2009, 10:45 AM

Thanks, I ordered the Dolphin gauges and new rings. I see now how they all go together then with the modification on the back piece, i will be in business. Thanks

Dan Bowles · 11-20-2009, 05:51 PM

My post used '54 gauge pods. They are deeper than the 47-53s.

Here is a link to a set done in Scotland using some new Woodward Gauges.

http://www.flickr.com/photos/2601498...7622841898720/

11-14-2009, 07:43 PM	#1
buildinga55 Registered User Join Date: Jan 2009 Location: Springfield, MO Posts: 258	How do you modify 5" gauge to fit I am planning on using a 5" gauge set like a Dolphin or something along that line. I understand you have to do some modifications to get them to fit the original stainless rings. Anyone have any articles or instructions on how to do the modification so the 5" gauges will fit a 48? Thanks

11-14-2009, 10:37 PM	#2
jeffs51chevy Registered User Join Date: Dec 2007 Location: caldwell, idaho Posts: 132	Re: How do you modify 5" gauge to fit Check out Sarge's GMC/s10 swap or Houston54's thread. I thought Houston54 did it originally, but Sarge has a nice write up on the proceedure. Others will chime in if I'm wrong Jeff

11-20-2009, 01:08 AM	#3
Dan Bowles AD Addict Join Date: Oct 2009 Location: Blissfield, MI Posts: 822	Re: How do you modify 5" gauge to fit I've got one over on the HAMB and Stovebolt. I put my son's Autometer's into stock housings. Just found out that another company referenced my tech post when someone approached them to do something similar. They just sent him a link! I'm flattered, now send me some gauges! http://www.jalopyjournal.com/forum/s...d.php?t=269446 I believe Houston54's link is in my thread as well. Last edited by Dan Bowles; 11-20-2009 at 01:10 AM.

11-20-2009, 10:45 AM	#4
buildinga55 Registered User Join Date: Jan 2009 Location: Springfield, MO Posts: 258	Re: How do you modify 5" gauge to fit Thanks, I ordered the Dolphin gauges and new rings. I see now how they all go together then with the modification on the back piece, i will be in business. Thanks

11-20-2009, 05:51 PM	#5
Dan Bowles AD Addict Join Date: Oct 2009 Location: Blissfield, MI Posts: 822	Re: How do you modify 5" gauge to fit My post used '54 gauge pods. They are deeper than the 47-53s. Here is a link to a set done in Scotland using some new Woodward Gauges. http://www.flickr.com/photos/2601498...7622841898720/

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.