TN Anybody have GMC dogdish hubcaps-chrome or polished - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**thelonerife** · 11-24-2009, 03:12 AM

Show me what you got. I can trade or buy.Would rather trade though.

longhorn70gmc · 11-24-2009, 04:34 AM

Hey Bro,
I have a few because I decorate my garage with caps both 1/2 and 3/4 ton chevy and GMC from 68 through 76 mainly. I have fun restoring them as well. I will have to get the camera out and take some pics. Maybe we can trade or something because I want your 2 half ton 4x4 caps from your other thread. I was impressed at your collection in the pics you posted. I am looking for 1/2 and 3/4 ton 4x4 front caps 69 - 74 for my collection in relation to the one in my avitar.
R/

**thelonerife** · 11-24-2009, 01:20 PM

Quote:

Originally Posted by longhorn70gmc

Hey Bro,
I have a few because I decorate my garage with caps both 1/2 and 3/4 ton chevy and GMC from 68 through 76 mainly. I have fun restoring them as well. I will have to get the camera out and take some pics. Maybe we can trade or something because I want your 2 half ton 4x4 caps from your other thread. I was impressed at your collection in the pics you posted. I am looking for 1/2 and 3/4 ton 4x4 front caps 69 - 74 for my collection in relation to the one in my avitar.
R/

Longhorn70, I have the other two 1/2tons that go on the rear and they are like new too. If you have some 68 gmc caps like what special k posted.get some pics. maybe we can trade.

Special K, My fault I should have put a wtt on the front of this. If you could do that? cool.I wasn't sure what the 67-68s looked like and I'm thinking I'll make my truck what it is, a 68GMC. Are you going to paint the red and black on yours?

OARNGESI · 11-24-2009, 05:31 AM

Thure was a set for 120 on here last week that were like new

**special-K** · 11-24-2009, 06:40 AM

Which caps are you wanting to see?
Is this related to buying or selling parts or just for reference?I ask since this is the parts board and I see no mention of buying or selling.

These 67/68s 1/2t caps have faded accent paint:

Here`s a better 3/4t:

Here are the 1/2t 69-72s:

**thelonerife** · 11-24-2009, 01:45 PM

Longhorn 70 heres the other two with the ones you bought. If your set is as good as these we can trade. The lips on the back are great. see pics. Theres only one bad point to one of these, it has three spots on it. I haven't tried to get them off.

**thelonerife** · 11-24-2009, 01:53 PM

In case anybody is confused I need 1/2 ton. I stay confused.

**thelonerife** · 11-24-2009, 11:44 PM

this may be on hold now. sorry

longhorn70gmc · 11-25-2009, 03:47 AM

Its cool Bro. On Hold is all good. I originally took it like maybe you were looking for 3/4 ton Stainless GMC and I have a few of those. I do however have 3 or 4 GMC 68 1/2 Ton caps. I will take ya some pics tomorrow anyway just to spice up the thread. I believe they are steel, painted type.
R/
Billy

longhorn70gmc · 11-25-2009, 02:18 PM

Good Morning!
Wow, I can see the pictures you were talking about last night. Thanks goes out to Special K because I didn't know these caps came in stainless. I thought they were always paintable steel in this style of cap. The 69-76 caps look good in stainless. Those are few and far between as well being GMC. I am still interested in the 4x4 caps from the other thread. I will post there about them so I help keep this threads focus on your hunt for chrome or stainless 67-68 GMC caps. Hubcaps are like a treasure that have a story to tell and it is their story I enjoy reading about. Good Luck Chuck on your search for the style your looking for.
R/

treetop_73 · 10-03-2010, 04:50 PM

Do these things just pry off? Is there a special tool? I've tried the biggest screw driver I have and it was bending bad and the cap was not budging at all.
Name: P1020431.jpg
Views: 208
Size: 36.0 KB

Name: P1020431.jpg
Views: 208
Size: 36.0 KB

67chevy1series · 10-03-2010, 08:16 PM

well my dad calls it the L wrench it has a socket at the end for the lug nuts and a huge screw diver (flat head) on the other sid eit came with all trucks it was part of the jack spare tire etc.. and the flat head part was to pry the cap off and the other end for lug nuts

treetop_73 · 10-03-2010, 11:58 PM

Thanks. I'll check the truck for it since I bought it this year and really haven't looked to see what the PO left.

11-24-2009, 03:12 AM	#1
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Anybody have GMC dogdish hubcaps-chrome or polished Show me what you got. I can trade or buy.Would rather trade though. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687 Last edited by thelonerife; 11-24-2009 at 01:42 PM. Reason: because I'm an idiot

11-24-2009, 04:34 AM	#2
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Anybody have GMC dogdish hubcaps-chrome or polished Hey Bro, I have a few because I decorate my garage with caps both 1/2 and 3/4 ton chevy and GMC from 68 through 76 mainly. I have fun restoring them as well. I will have to get the camera out and take some pics. Maybe we can trade or something because I want your 2 half ton 4x4 caps from your other thread. I was impressed at your collection in the pics you posted. I am looking for 1/2 and 3/4 ton 4x4 front caps 69 - 74 for my collection in relation to the one in my avitar. R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

11-24-2009, 05:31 AM	#4
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Anybody have GMC dogdish hubcaps-chrome or polished Thure was a set for 120 on here last week that were like new __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

11-24-2009, 06:40 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Anybody have GMC dogdish hubcaps-chrome or polished Which caps are you wanting to see? Is this related to buying or selling parts or just for reference?I ask since this is the parts board and I see no mention of buying or selling. These 67/68s 1/2t caps have faded accent paint: Here`s a better 3/4t: Here are the 1/2t 69-72s: __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 11-24-2009 at 08:08 AM.

11-24-2009, 01:45 PM	#6
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Anybody have GMC dogdish hubcaps-chrome or polished Longhorn 70 heres the other two with the ones you bought. If your set is as good as these we can trade. The lips on the back are great. see pics. Theres only one bad point to one of these, it has three spots on it. I haven't tried to get them off. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687 Last edited by thelonerife; 11-24-2009 at 01:46 PM.

11-24-2009, 01:53 PM	#7
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Anybody have GMC dogdish hubcaps-chrome or polished In case anybody is confused I need 1/2 ton. I stay confused. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-24-2009, 11:44 PM	#8
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Anybody have GMC dogdish hubcaps-chrome or polished this may be on hold now. sorry __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-25-2009, 03:47 AM	#9
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Anybody have GMC dogdish hubcaps-chrome or polished Its cool Bro. On Hold is all good. I originally took it like maybe you were looking for 3/4 ton Stainless GMC and I have a few of those. I do however have 3 or 4 GMC 68 1/2 Ton caps. I will take ya some pics tomorrow anyway just to spice up the thread. I believe they are steel, painted type. R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

11-25-2009, 02:18 PM	#10
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Anybody have GMC dogdish hubcaps-chrome or polished Good Morning! Wow, I can see the pictures you were talking about last night. Thanks goes out to Special K because I didn't know these caps came in stainless. I thought they were always paintable steel in this style of cap. The 69-76 caps look good in stainless. Those are few and far between as well being GMC. I am still interested in the 4x4 caps from the other thread. I will post there about them so I help keep this threads focus on your hunt for chrome or stainless 67-68 GMC caps. Hubcaps are like a treasure that have a story to tell and it is their story I enjoy reading about. Good Luck Chuck on your search for the style your looking for. R/ Attached Images __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE! Last edited by longhorn70gmc; 11-25-2009 at 02:28 PM.

10-03-2010, 04:50 PM	#11
treetop_73 Registered User Join Date: Feb 2010 Location: Victorville, CA Posts: 98	Re: Anybody have GMC dogdish hubcaps-chrome or polished Do these things just pry off? Is there a special tool? I've tried the biggest screw driver I have and it was bending bad and the cap was not budging at all. __________________ '85 GMC High Sierra 2500

10-03-2010, 08:16 PM	#12
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Anybody have GMC dogdish hubcaps-chrome or polished well my dad calls it the L wrench it has a socket at the end for the lug nuts and a huge screw diver (flat head) on the other sid eit came with all trucks it was part of the jack spare tire etc.. and the flat head part was to pry the cap off and the other end for lug nuts

10-03-2010, 11:58 PM	#13
treetop_73 Registered User Join Date: Feb 2010 Location: Victorville, CA Posts: 98	Re: Anybody have GMC dogdish hubcaps-chrome or polished Thanks. I'll check the truck for it since I bought it this year and really haven't looked to see what the PO left. __________________ '85 GMC High Sierra 2500

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.