Billet Aluminum Dash Panels and Glove Box Doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ryan Hubbard · 12-03-2009, 01:15 PM

I currently have 14 Dash Panels that are setup for Auto Meter 5" gauges and 14 Glove Box Doors. I usually sold these for $450.00 for the two but I am running an end of the year special for $350.00 for the set and that includes ground shipping. If you live in CA, I will have to add sales tax. I will accept payment at my paypal address of ryan.hubbard@aspencontrols.com. I have attached picturse below. Once these 14 are gone the deal is over for now.

cparman · 12-03-2009, 06:23 PM

could you post a picture of one of the gauge sets finished with gauges in it?

Ryan Hubbard · 12-03-2009, 07:33 PM

Here is a picture someone posted on the other thread. My dash has VDO gauges.

Ryan Hubbard · 12-03-2009, 07:45 PM

Here is my dash with the VDO Gauges

Last_Paladin · 03-23-2012, 10:19 PM

Quote:

Originally Posted by Ryan Hubbard

Here is a picture someone posted on the other thread. My dash has VDO gauges.

What LEDs are you using?

Ryan Hubbard · 03-27-2012, 12:41 AM

Quote:

Originally Posted by Last_Paladin

What LEDs are you using?

Here is the Painless Wiring LED I used

5/16" LED Indicating light part number 80205 for green, 80204 for red, 80206 for blue and 80203 for Amber

chevyratracer · 08-04-2012, 10:46 PM

Are you still selling these?

DjS71 · 12-03-2009, 09:17 PM

I'm interested, I'll have to run it past those bastards who want my money for electricity and Christmas presents.

EDIT: What size are the smaller gauge holes?

Ryan Hubbard · 12-03-2009, 11:15 PM

2 1/16"

AJs72K5 · 12-04-2009, 07:08 PM

Dang, those are nice. How much for just the driver side?

Ground Pounder · 12-05-2009, 11:32 AM

What kind of finish do they have hard to tell from pics. Thanks

northern 85 · 12-06-2009, 09:04 AM

Can the center be painted black and the outside edge be polished?

Ryan Hubbard · 12-06-2009, 05:12 PM

Quote:

Originally Posted by northern 85

Can the center be painted black and the outside edge be polished?

That is what I did with my dash panel. They are made out 6061 aluminum and polish up real nice.

Ryan Hubbard · 12-06-2009, 07:48 PM

Quote:

Originally Posted by Ground Pounder

What kind of finish do they have hard to tell from pics. Thanks

The finish is just a bare aluminum that has been bead blasted to remove the tooling marks.

Ryan Hubbard · 12-06-2009, 10:04 PM

Quote:

Originally Posted by ajs72k5

dang, those are nice. How much for just the driver side?

$225.00

**Thealien** · 12-06-2009, 10:28 AM

Nice, im over $1000 over budget on my truck now. I'll see what I can do

VA72C10 · 12-06-2009, 08:06 PM

Here you go!

(Can I get a discount

)

Beautiful product!

Ground Pounder · 12-06-2009, 09:42 PM

I'm in money sent

Ground Pounder · 12-06-2009, 10:38 PM

Could you do a ashtray door & radio delete or billet knobs ?

**Hart_Rod** · 12-08-2009, 08:58 PM

I need one that has a 3 3/8 center hole and 2 5/8 small holes. Are you still custom making them?

Ryan Hubbard · 12-08-2009, 10:39 PM

Quote:

Originally Posted by Hart_Rod

I need one that has a 3 3/8 center hole and 2 5/8 small holes. Are you still custom making them?

I have three available like that I can do the same deal on.

**Hart_Rod** · 12-09-2009, 12:06 AM

Quote:

Originally Posted by Ryan Hubbard

I have three available like that I can do the same deal on.

I'm very interested. Please post some pictures when you can.

Ryan Hubbard · 12-09-2009, 10:17 AM

Quote:

Originally Posted by Hart_Rod

I'm very interested. Please post some pictures when you can.

It will take me a couple of days because I am on the road for business. I should be back by the weekend.

darkhorse970 · 12-09-2009, 09:16 PM

I'm also interested in one like Hart_Rod is requesting. I would like to see the pics as well.

Ryan Hubbard · 12-10-2009, 01:09 PM

Here is the dash panel with the 3 3/8 opening in middle. These still have all the machining marks on them.

12-03-2009, 01:15 PM	#1
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Billet Aluminum Dash Panels and Glove Box Doors I currently have 14 Dash Panels that are setup for Auto Meter 5" gauges and 14 Glove Box Doors. I usually sold these for $450.00 for the two but I am running an end of the year special for $350.00 for the set and that includes ground shipping. If you live in CA, I will have to add sales tax. I will accept payment at my paypal address of ryan.hubbard@aspencontrols.com. I have attached picturse below. Once these 14 are gone the deal is over for now. Attached Images

12-03-2009, 06:23 PM	#2
cparman sharp as a marble Join Date: Jan 2007 Location: atlantic beach,florida Posts: 1,082	Re: Billet Aluminum Dash Panels and Glove Box Doors could you post a picture of one of the gauge sets finished with gauges in it?

12-03-2009, 07:33 PM	#3
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: Billet Aluminum Dash Panels and Glove Box Doors Here is a picture someone posted on the other thread. My dash has VDO gauges. Attached Images

12-03-2009, 07:45 PM	#4
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: Billet Aluminum Dash Panels and Glove Box Doors Here is my dash with the VDO Gauges Attached Images

08-04-2012, 10:46 PM	#7
chevyratracer Registered User Join Date: May 2012 Location: Bakersfield, CA Posts: 2	Re: Billet Aluminum Dash Panels and Glove Box Doors Are you still selling these?

12-03-2009, 09:17 PM	#8
DjS71 Registered User Join Date: Feb 2009 Location: Santa Rosa, CA Posts: 267	Re: Billet Aluminum Dash Panels and Glove Box Doors I'm interested, I'll have to run it past those bastards who want my money for electricity and Christmas presents. EDIT: What size are the smaller gauge holes? __________________ 1971 C10 Short/Fleet 307-2BBL/3OTT 1999 Silverado 2500 ECSB 6.0/4L80 Last edited by DjS71; 12-03-2009 at 09:48 PM.

12-03-2009, 11:15 PM	#9
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: Billet Aluminum Dash Panels and Glove Box Doors 2 1/16"

12-04-2009, 07:08 PM	#10
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Billet Aluminum Dash Panels and Glove Box Doors Dang, those are nice. How much for just the driver side? __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

12-05-2009, 11:32 AM	#11
Ground Pounder Registered User Join Date: Dec 2009 Location: New York Posts: 19	Re: Billet Aluminum Dash Panels and Glove Box Doors What kind of finish do they have hard to tell from pics. Thanks

12-06-2009, 09:04 AM	#12
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Billet Aluminum Dash Panels and Glove Box Doors Can the center be painted black and the outside edge be polished?

12-06-2009, 10:28 AM	#16
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Billet Aluminum Dash Panels and Glove Box Doors Nice, im over $1000 over budget on my truck now. I'll see what I can do

12-06-2009, 08:06 PM	#17
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Billet Aluminum Dash Panels and Glove Box Doors Here you go! (Can I get a discount ) Beautiful product! __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 12-06-2009 at 08:07 PM.

12-06-2009, 09:42 PM	#18
Ground Pounder Registered User Join Date: Dec 2009 Location: New York Posts: 19	Re: Billet Aluminum Dash Panels and Glove Box Doors I'm in money sent

12-06-2009, 10:38 PM	#19
Ground Pounder Registered User Join Date: Dec 2009 Location: New York Posts: 19	Re: Billet Aluminum Dash Panels and Glove Box Doors Could you do a ashtray door & radio delete or billet knobs ?

12-08-2009, 08:58 PM	#20
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Billet Aluminum Dash Panels and Glove Box Doors I need one that has a 3 3/8 center hole and 2 5/8 small holes. Are you still custom making them? Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 12-08-2009 at 08:59 PM.



Register or Log In To remove these advertisements.

12-09-2009, 09:16 PM	#24
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,104	Re: Billet Aluminum Dash Panels and Glove Box Doors I'm also interested in one like Hart_Rod is requesting. I would like to see the pics as well. __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

12-10-2009, 01:09 PM	#25
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: Billet Aluminum Dash Panels and Glove Box Doors Here is the dash panel with the 3 3/8 opening in middle. These still have all the machining marks on them. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.