Factory Swaybar w/ Bags - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tcb-1 · 12-22-2009, 06:44 PM

keep it on or toss? I've also read somewhere that the swaybar needs trimmed a bit for bags.

any advantages, disadvantages, thoughts?

thanks gang!

tcb-1 · 12-22-2009, 07:02 PM

oh yeah, forgot to add that I have CPP lowered sway bar perches.

gringoloco · 12-22-2009, 07:32 PM

Slap it in there and see if it works. Mine cleared fine- others have had to trim. I figure the more stability the better. I guess it depends on if you want the truck to handle or 'dance'...

*Shane* · 12-22-2009, 09:13 PM

I think most folks are trimming 1" to 1 1/4" off the ends ... makes sure you chamfer those edges too.

**N2TRUX** · 12-22-2009, 11:11 PM

Yes, run it. You can use the CPP perches, or bolt it directly to the frame. Either way, mount it up as it will be an improvement.

12-22-2009, 06:44 PM	#1
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Factory Swaybar w/ Bags keep it on or toss? I've also read somewhere that the swaybar needs trimmed a bit for bags. any advantages, disadvantages, thoughts? thanks gang! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

12-22-2009, 07:02 PM	#2
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Factory Swaybar w/ Bags oh yeah, forgot to add that I have CPP lowered sway bar perches. __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

12-22-2009, 07:32 PM	#3
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Factory Swaybar w/ Bags Slap it in there and see if it works. Mine cleared fine- others have had to trim. I figure the more stability the better. I guess it depends on if you want the truck to handle or 'dance'... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-22-2009, 09:13 PM	#4
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Factory Swaybar w/ Bags I think most folks are trimming 1" to 1 1/4" off the ends ... makes sure you chamfer those edges too.

12-22-2009, 11:11 PM	#5
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Factory Swaybar w/ Bags Yes, run it. You can use the CPP perches, or bolt it directly to the frame. Either way, mount it up as it will be an improvement. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.