MN 71 blazer parts. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 12-29-2009, 11:48 PM

All parts from a 71 CST blazer 4x4. Shipping is extra on everything.
Behind the drivers seat jack hold down parts. $20
Inside wiring appears decent with the door jamb switches and the under dash courtesy lights. Fuse block looks fine. The wire to the heater fan was cut, and the end of the lighter has been cut. Ignition switch is included and seems to work fine, but looks rough on back and the lighter is also included. $50
Heater control needs a fan lever. All cables look good. Inside box looks fine. $50
Throttle pedal and bracket, $25 Other pedal pads included, but aren't much...
Saddle visors and day night rearview $75

I will add more parts to this thread as i pull stuff. Stay tuned.

**too much stuff** · 12-29-2009, 11:52 PM

More pics
The throttle cable is junk, and the face on the heater is just barely loose.

tjsblazer · 12-30-2009, 06:28 PM

PM sent

**too much stuff** · 12-30-2009, 11:04 PM

More stuff...
Clutch delete cover $15 shipped
Washer bottle and bracket. $15 plus ship
Tailgate upper catch $25 plus ship. Not perfect, but still useable.

**D.PASSMORE** · 01-01-2010, 11:23 AM

PM sent

Dusty71blazer · 01-01-2010, 10:00 PM

tailgate upper catch
(this attaches to the top of the tailgate to help seal- right?)
How much shipped to 51106?
Do you have door armrests? What color? How much?

**too much stuff** · 01-01-2010, 10:08 PM

That would be where the hatch seals. The interior is saddle, but i will have to check for armrests if that is the color you need. I will get a shipping price tomorrow. Eric

Dusty71blazer · 01-01-2010, 10:25 PM

looking for black arm rests

**too much stuff** · 01-06-2010, 11:05 PM

Adding a couple pics for passthebuck and D passmore.
David, hard to see the wrinkle and it is on the top if the visor is up.
Greg, i think this is everything you were asking about. Definatly a minnesota rig. Eric
Dusty, nothing for black armrests right now.

72Levi · 01-07-2010, 12:17 AM

This is a longshot but I am looking for saddle color rear seat arm rests? Can you check please, thanks.

**too much stuff** · 01-07-2010, 12:58 AM

Quote:

Originally Posted by 72Levi

This is a longshot but I am looking for saddle color rear seat arm rests? Can you check please, thanks.

You are right, it is a longshot and i can't help you. Sorry, Eric

heidick70 · 01-07-2010, 01:55 AM

any idea if that gas tank will fit between the back rails of a 70 gmc long bed truck? if so how much are u lookin to get out of it

**too much stuff** · 01-07-2010, 10:10 AM

Not sure about the fit, that tank is junk.

rawraw67 · 01-07-2010, 10:21 AM

what about the gas filler neck ?

**too much stuff** · 01-07-2010, 10:24 AM

Quote:

Originally Posted by rawraw67

what about the gas filler neck ?

Spoken for, sorry.

**passthebuck** · 01-09-2010, 12:14 PM

Eric,

I'm in for all of the stuff I asked for.

71stroker · 01-09-2010, 02:40 PM

Is the throttle pedal and bracket still available? If so, how much shipped to 96019?

**too much stuff** · 01-09-2010, 04:28 PM

Quote:

Originally Posted by 71stroker

Is the throttle pedal and bracket still available? If so, how much shipped to 96019?

I think D.passmore will be getting that. I will let you know if it becomes available. Eric

**1971K54X4** · 01-09-2010, 05:31 PM

Is the washer bottle and bracket still available? If so how much to ship to 52057?

**too much stuff** · 01-09-2010, 06:08 PM

Quote:

Originally Posted by 1971K54X4

Is the washer bottle and bracket still available? If so how much to ship to 52057?

How about $24 shipped? The 3 screws are included also. Eric

soverstreet · 01-10-2010, 11:10 PM

do you still have the visors? if so how much to 77095. need for my 71. just the brackets needed

**too much stuff** · 01-11-2010, 12:33 AM

Quote:

Originally Posted by soverstreet

do you still have the visors? if so how much to 77095. need for my 71. just the brackets needed

I think they are spoken for, but i will let you know if it falls through. Eric

**1971K54X4** · 01-16-2010, 02:39 PM

Parts arrived wednesday, look great. Thanks for the fast service.

69-72 · 01-17-2010, 08:14 PM

If you have them are the defrost vents the same color as the visors? Have or happen to know of any decent single wall tops in Northern Mn?

12-29-2009, 11:48 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,721	71 blazer parts. All parts from a 71 CST blazer 4x4. Shipping is extra on everything. Behind the drivers seat jack hold down parts. $20 Inside wiring appears decent with the door jamb switches and the under dash courtesy lights. Fuse block looks fine. The wire to the heater fan was cut, and the end of the lighter has been cut. Ignition switch is included and seems to work fine, but looks rough on back and the lighter is also included. $50 Heater control needs a fan lever. All cables look good. Inside box looks fine. $50 Throttle pedal and bracket, $25 Other pedal pads included, but aren't much... Saddle visors and day night rearview $75 I will add more parts to this thread as i pull stuff. Stay tuned. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-29-2009, 11:52 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,721	Re: 71 blazer parts. More pics The throttle cable is junk, and the face on the heater is just barely loose. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-30-2009, 06:28 PM	#3
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: 71 blazer parts. PM sent __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

12-30-2009, 11:04 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,721	Re: 71 blazer parts. More stuff... Clutch delete cover $15 shipped Washer bottle and bracket. $15 plus ship Tailgate upper catch $25 plus ship. Not perfect, but still useable. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-01-2010, 11:23 AM	#5
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: 71 blazer parts. PM sent

01-01-2010, 10:00 PM	#6
Dusty71blazer Registered User Join Date: Nov 2009 Location: Sioux City, IA Posts: 158	Re: 71 blazer parts. tailgate upper catch (this attaches to the top of the tailgate to help seal- right?) How much shipped to 51106? Do you have door armrests? What color? How much? __________________ Dustin '97 Dodge Ram (daily driver) '71 Blazer (supposed to be a toy... insists on being a project) '85 Monte Carlo SS (project) Last edited by Dusty71blazer; 01-01-2010 at 10:00 PM.

01-01-2010, 10:08 PM	#7
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,721	Re: 71 blazer parts. That would be where the hatch seals. The interior is saddle, but i will have to check for armrests if that is the color you need. I will get a shipping price tomorrow. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-01-2010, 10:25 PM	#8
Dusty71blazer Registered User Join Date: Nov 2009 Location: Sioux City, IA Posts: 158	Re: 71 blazer parts. looking for black arm rests __________________ Dustin '97 Dodge Ram (daily driver) '71 Blazer (supposed to be a toy... insists on being a project) '85 Monte Carlo SS (project)

01-06-2010, 11:05 PM	#9
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,721	Re: 71 blazer parts. Adding a couple pics for passthebuck and D passmore. David, hard to see the wrinkle and it is on the top if the visor is up. Greg, i think this is everything you were asking about. Definatly a minnesota rig. Eric Dusty, nothing for black armrests right now. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-07-2010, 12:17 AM	#10
72Levi Active Member Join Date: Feb 2006 Location: sa tx Posts: 851	Re: 71 blazer parts. This is a longshot but I am looking for saddle color rear seat arm rests? Can you check please, thanks. __________________ 1972 K5 Blazer ALL ORIGINAL paint & engine, A/C, Tilt, 4sp, AM/FM, Tow Hooks, Aux Battery Tray, Tach, Vacuum 2004 FORD FX4 SuperCrew 2005 CTS-V 12 sec family car 2008 Buick Enclave AWD, Nav, & DVD, Wife LOVES it!

01-07-2010, 01:55 AM	#12
heidick70 Registered User Join Date: Dec 2009 Location: Fort Collins Co Posts: 126	Re: 71 blazer parts. any idea if that gas tank will fit between the back rails of a 70 gmc long bed truck? if so how much are u lookin to get out of it

01-07-2010, 10:10 AM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,721	Re: 71 blazer parts. Not sure about the fit, that tank is junk. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-07-2010, 10:21 AM	#14
rawraw67 Registered User Join Date: Dec 2007 Location: Bay the Bay Posts: 483	Re: 71 blazer parts. what about the gas filler neck ?

01-09-2010, 12:14 PM	#16
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Re: 71 blazer parts. Eric, I'm in for all of the stuff I asked for. __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

01-09-2010, 02:40 PM	#17
71stroker Registered User Join Date: Apr 2008 Location: Burney, California Posts: 50	Re: 71 blazer parts. Is the throttle pedal and bracket still available? If so, how much shipped to 96019? __________________ 1971 K10 1/2 ton short fleetside, 4 in. lift, sm465/np205, 383 waiting to go in. 1972 K10 short fleetside converted to 3/4 ton, 12 in. lift, t.350/np205, sbc 350. 1970 C10 short fleetside, saginaw 3 spd, no motor. 1971 GMC 3/4 ton 2wd suburban parts truck.(gutted) 1970 GMC 1/2 ton 4wd suburban t.350/np205 no motor parts truck.



Register or Log In To remove these advertisements.

01-09-2010, 05:31 PM	#19
1971K54X4 Member Join Date: Jan 2007 Location: Manchester, Iowa Posts: 1,493	Re: 71 blazer parts. Is the washer bottle and bracket still available? If so how much to ship to 52057? __________________ Korey 1955 Bel Air 2 door hardtop 1971 Blazer 4x4 1973 Z-28 Prostreet

01-10-2010, 11:10 PM	#21
soverstreet Registered User Join Date: Jan 2010 Location: houston, texas Posts: 12	Re: 71 blazer parts. do you still have the visors? if so how much to 77095. need for my 71. just the brackets needed

01-16-2010, 02:39 PM	#23
1971K54X4 Member Join Date: Jan 2007 Location: Manchester, Iowa Posts: 1,493	Re: 71 blazer parts. Parts arrived wednesday, look great. Thanks for the fast service. __________________ Korey 1955 Bel Air 2 door hardtop 1971 Blazer 4x4 1973 Z-28 Prostreet

01-17-2010, 08:14 PM	#24
69-72 Registered User Join Date: May 2008 Location: 204 Posts: 903	Re: 71 blazer parts. If you have them are the defrost vents the same color as the visors? Have or happen to know of any decent single wall tops in Northern Mn? __________________ 1969 Chevy Custom Camper 3/4 ton Rust free survivor 1972 Chevy Blazer CST 4x4 Almost Rust free survivor 1972 GMC Jimmy 2wd Undergoing surgery Last edited by 69-72; 01-17-2010 at 08:16 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.