![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Feb 2001
Location: Lake Stevens,WA 98258 North of Seattle
Posts: 833
|
3/4ton with 1 ton axels
Over the years I have seen many trucks advertised this way. What exactly does this mean?
__________________
Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400 |
![]() |
![]() |
![]() |
#2 |
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
It doesnt really apply to our trucks but post 73 trucks and especially post 82's often had 3/4 ton running gear with 6 lug lighter duty axles. The GVW actually reflecting what a 3/4 ton payload would be unlike our where a 3/4 ton rating truck would haul more like 3000 lbs. . A heavy 3/4 ton would be a 3/4 ton with 1 ton running gear ie 8 lug axle and suspension.
__________________
No truck :-( |
![]() |
![]() |
![]() |
#3 |
"Ochre Ogre"
Join Date: Apr 2000
Location: Springfield, MN
Posts: 3,558
|
I have also heard a lot of people describe the corp/eaton rearend as the "1 ton axle".
Just like the people who might call their 67-70 C-10's a "heavy half" because it came with 6 lugs.
__________________
Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087 |
![]() |
![]() |
![]() |
#4 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
What Da-burb said is what I usually see.
|
![]() |
![]() |
![]() |
#5 |
Web Wheeler
Join Date: Jan 2000
Location: BC, Canada, eh?
Posts: 388
|
6-lug 3/4-tons didn't show up until '88.
"One ton axles" on a 4x4 usually means a 14-bolt full-floater (or the big Eaton) and a Dana 60 front.
__________________
'66 C10 longstep - Clifford equiped '84 C20 Suburban 6.2L - awaiting 4x4 conversion '91 V3500 Crewcab - awaiting diesel swap |
![]() |
![]() |
![]() |
#6 |
Account Suspended
Join Date: Jan 2003
Location: il
Posts: 115
|
and dana 60 front was only available under the K30's. all other series under that got the dana 44 or the 10 bolt 8.5" Corp axle so...
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Nov 2000
Location: Carver County, Minnesota, USA
Posts: 626
|
I've always understood the "heavy half" as a 1/2T PU with a 3/4T Rear axle setup. My memory says that with a heavy half, the front would sit lower than the rear (at least after 20 years anyways!).
-Roger
__________________
72 Chev C-10 90% restored (former AZ truck) ... 71 Chev K-20 Cheyenne my vacation crusier... 72 Chev C-10 Now retired and striped after many faithful miles... 72 GMC 1500 Retired to the junk yard after bought new in '71... |
![]() |
![]() |
![]() |
#8 |
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Roger's right, but with a six lug setup on the 3/4 ton axle. If you go to the older trucks, the 3/4 and 1 ton used the same rear axle. When I was looking at 14 bolt floaters for my 52, I was told the housings were the same design, differences were in housing and axle length, drums and brakes being bigger for the 1 ton.
__________________
Fred There is no such thing as too much cam...just not enough engine. ![]() |
![]() |
![]() |
![]() |
#9 | |
Web Wheeler
Join Date: Jan 2000
Location: BC, Canada, eh?
Posts: 388
|
Quote:
Often when ads say "1-ton axles" on a 1/2 or 3/4-ton, they mean the 1-ton axles have been swapped in. If it was "1-ton rear axle" it probably means it has a full-floating rear (original or swapped). Most 3/4-tons after '80 had semi-floating rears.
__________________
'66 C10 longstep - Clifford equiped '84 C20 Suburban 6.2L - awaiting 4x4 conversion '91 V3500 Crewcab - awaiting diesel swap |
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Oct 2002
Location: where it's hot
Posts: 1,059
|
????????????????/
My 1967 C20 has an 8 lug / 14 bolt rear , with each out side hub having 8 cap bolts and a removeable cover to allow the axles to pull out . I understood this was a one ton full floater and It appears to be original to the truck . Did any one ton FF come on 67 C20'S ?
|
![]() |
![]() |
![]() |
#11 |
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
GM didnt even start making 14 bolt rear ends until 73. Yours was swapped in later.
__________________
No truck :-( |
![]() |
![]() |
![]() |
#12 | |
Registered User
Join Date: Oct 2002
Location: where it's hot
Posts: 1,059
|
Quote:
|
|
![]() |
![]() |
![]() |
#13 |
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
This might be a dumb question but are you sure its not a Dana 60 because those did come on coil sprung C20's .
__________________
No truck :-( |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Oct 2002
Location: where it's hot
Posts: 1,059
|
What is a 14 bolt FF worth ?
|
![]() |
![]() |
![]() |
#15 | |
Registered User
Join Date: Oct 2002
Location: where it's hot
Posts: 1,059
|
Quote:
It's not a dumb question , Actualy I do not know how to identify a dana 60 . It is 14 bolt with the end hubs that unbolt for axle removal . |
|
![]() |
![]() |
![]() |
#16 |
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
Oh . How many bolts does the cover have ?
__________________
No truck :-( |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Oct 2002
Location: where it's hot
Posts: 1,059
|
Ok my stupid , I just went and counted them again and the cover has 10 bolts and each end hub has 8 cap bolts to hold on the hub covers .
|
![]() |
![]() |
![]() |
#18 |
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
does it look like this?
__________________
No truck :-( |
![]() |
![]() |
![]() |
#19 |
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
You have a Dana 60. Welcome to the club.
__________________
No truck :-( |
![]() |
![]() |
![]() |
#20 | |
Registered User
Join Date: Oct 2002
Location: where it's hot
Posts: 1,059
|
Quote:
|
|
![]() |
![]() |
![]() |
#21 |
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
Do you have coils in back. I assume you do as you said you had a panhard bar. Yours is pretty rare then. Mine has coils too but I have only seen a few that do although there are some on this board who swear that none of them did. Theyr'e quite wrong . Do you know what the gearing in yours is?
__________________
No truck :-( |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Mar 2002
Location: Bondurant, IA but in Worcester, MA for school
Posts: 767
|
Heres a better pic of a Dana 60
__________________
1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/ |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Mar 2002
Location: Bondurant, IA but in Worcester, MA for school
Posts: 767
|
One more...
HotRod
__________________
1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/ |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Oct 2002
Location: where it's hot
Posts: 1,059
|
Thanks for the pic's hotrod but that is not it ,
![]() MikeP , yes it is a coil rear . Last edited by Bowed; 01-28-2003 at 01:36 AM. |
![]() |
![]() |
![]() |
#25 |
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
Do you have a series or studs with nuts around the perimeter on the side of the rear end that faces towards the transmission. It sounds like you have an Eaton if so .
HA HA HA ... I have the only coil sprung Dana 60 here then.... Muhaha !
__________________
No truck :-( |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|