MS Blazer bed sides and floor for patches - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*1sik52* · 01-05-2010, 08:11 PM

I have both drivers and passenger side bed sides (Inner and Outer) and bed floor for patches. Prices depend on how big the patch is plus shipping.

**kev2809** · 01-05-2010, 11:33 PM

hey...how much for the piece of the passenger side lower section right before the wheel arch...is the same as a suburban right?

usmcchevy · 01-05-2010, 11:45 PM

If the blazer bed floor is the same as the truck bed, I could use at least the front 2' all the way across

*1sik52* · 01-06-2010, 12:06 AM

Quote:

Originally Posted by usmcchevy

If the blazer bed floor is the same as the truck bed, I could use at least the front 2' all the way across

The front section is different than a truck

**71blksuper4x4** · 01-06-2010, 12:11 AM

what about around the from above the wheel wells about 4-5" down to the body line from each??? Trevor

**71blksuper4x4** · 01-06-2010, 12:13 AM

like this. Trevor

**kev2809** · 01-05-2010, 11:35 PM

if this helps...

*1sik52* · 01-06-2010, 12:05 AM

Quote:

Originally Posted by kev2809

if this helps...

Yes, I will cut that for you for $25 plus shipping

*1sik52* · 01-06-2010, 12:50 AM

No problem 71BLKSUPER

**kev2809** · 01-06-2010, 01:04 AM

ill take it..if he passes on those sections he highlighted..I might need the driverside back half of the wheel arch if it fits a suburban

*1sik52* · 01-06-2010, 01:21 AM

Quote:

Originally Posted by kev2809

ill take it..if he passes on those sections he highlighted..I might need the driverside back half of the wheel arch if it fits a suburban

The pieces that hes requesting doesnt include the piece that you are requesting. If you still want that section its yours. If he passes on the arches then the drivers side back half is yours as well if you want it

**leddzepp** · 01-06-2010, 03:12 AM

I am interested in this part if it gets to me. Where the bottom rear of the arch ends, on back. Shipping to 92503, if that helps. Thanks. Also, what is the condition of the tail light section?

crr26@cox.net · 01-06-2010, 03:26 AM

hey bud how much for entire bedsides and do you have complete floor the back 3in of mine is rotten

**kev2809** · 01-06-2010, 07:24 AM

ok cool..can I get a quote on both shipped to 77471..and a quote for just the small piece in case he passes on the arch. either way ill take the small piece

*1sik52* · 01-06-2010, 10:06 AM

Quote:

Originally Posted by leddzepp

I am interested in this part if it gets to me. Where the bottom rear of the arch ends, on back. Shipping to 92503, if that helps. Thanks. Also, what is the condition of the tail light section?

Can you mark exactly what part you are referring to? and when you say tailgate section, what area are you referring to?

Quote:

Originally Posted by crr26@cox.net

hey bud how much for entire bedsides and do you have complete floor the back 3in of mine is rotten

The area of the bed floor that you are referring to is no good. Thats why I replaced mine. As for the entire bedsides theres already people requesting patches so the bedsides will be no good. If the people in front of you dont take the patches then I will offer you the bedsides.

**leddzepp** · 01-06-2010, 12:19 PM

Quote:

Originally Posted by 1sik52

Can you mark exactly what part you are referring to? and when you say tailgate section, what area are you referring to?

The area of the bed floor that you are referring to is no good. Thats why I replaced mine. As for the entire bedsides theres already people requesting patches so the bedsides will be no good. If the people in front of you dont take the patches then I will offer you the bedsides.

I want the section that I have pictured. Are you able to see it? I cropped the section from your original picture. I am wondering about the condition tail light section where the tail light attaches....don't really know how else to decribe it

**71blksuper4x4** · 01-06-2010, 01:15 PM

Sik, I guess I only need the driver's side area like this, proably about 8" in front of the arch, about 5" on top, and about 4-5" out back. Preferably cut just below body line in the front about 1" or 2". Trying to keep some warpage down in hard get to spots. I don't know how much Scott (Leddzepp) needs for the piece he wants, but if you can go an 1" or 2" on the backside down from the body line and make the cut, it sure makes my welding easier, but that is up to Scott, as he called that piece. Trevor

**leddzepp** · 01-06-2010, 01:53 PM

I will pass to make it easier for everyone. Thanks! ttt

**71blksuper4x4** · 01-06-2010, 03:27 PM

scott, are you sure? Trevor

**kev2809** · 01-06-2010, 06:35 PM

I might able to use the rest of the wheel arch on the driver side..let me measure to be sure

**kev2809** · 01-06-2010, 09:56 PM

heres the other piece i need...not sure if its still gonna be there. driver side, i need about 2 inches above the body line...and about 3 inches from edge towards the rear...if that makes sense

*1sik52* · 01-06-2010, 10:30 PM

Quote:

Originally Posted by leddzepp

I am interested in this part if it gets to me. Where the bottom rear of the arch ends, on back. Shipping to 92503, if that helps. Thanks. Also, what is the condition of the tail light section?

Leddzepp, This part of your pic was rolled under at one time and is not straight. If you are still interested in that section let me know. I do have another taillight section from another Blazer thats in decent shape, but it doesnt go that far towards the wheel well.

Quote:

Originally Posted by 71blksuper4x4

Sik, I guess I only need the driver's side area like this, proably about 8" in front of the arch, about 5" on top, and about 4-5" out back. Preferably cut just below body line in the front about 1" or 2". Trying to keep some warpage down in hard get to spots. I don't know how much Scott (Leddzepp) needs for the piece he wants, but if you can go an 1" or 2" on the backside down from the body line and make the cut, it sure makes my welding easier, but that is up to Scott, as he called that piece. Trevor

71blksuper4x4, If you want a section that big would you be willing to go 40?

Quote:

Originally Posted by kev2809

heres the other piece i need...not sure if its still gonna be there. driver side, i need about 2 inches above the body line...and about 3 inches from edge towards the rear...if that makes sense

71blksuper will be getting that section with his big section.

**71blksuper4x4** · 01-06-2010, 10:37 PM

Sik, $40 sounds fair, go ahead and get me some measurements on how long and tall and I will guess how heavy it is, and get a ballpark of price of shipping. I will get a measurment tomorrow of what length I need in front and behind the wheel well to cover all my pin holes. I know the rear looks pretty good, but I have a bunch of pin holes around the front of the wheel well on my bed. I am definitely wanting this, but I need to double check my measurments to allow some room for error. Like I said, I will only need the driver's side as my passenger side arch is good. Trevor

**71blksuper4x4** · 01-06-2010, 10:38 PM

what are you using to cut the piece out with?

crr26@cox.net · 01-08-2010, 12:28 PM

Are bthecomplete bedsides still available i am lost wth all the replies

01-05-2010, 08:11 PM	#1
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Blazer bed sides and floor for patches I have both drivers and passenger side bed sides (Inner and Outer) and bed floor for patches. Prices depend on how big the patch is plus shipping. Last edited by 1sik52; 02-16-2010 at 09:42 PM.

01-05-2010, 11:33 PM	#2
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Blazer bed sides and floor for patches hey...how much for the piece of the passenger side lower section right before the wheel arch...is the same as a suburban right? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-05-2010, 11:45 PM	#3
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: Blazer bed sides and floor for patches If the blazer bed floor is the same as the truck bed, I could use at least the front 2' all the way across __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

01-06-2010, 12:11 AM	#5
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Blazer bed sides and floor for patches what about around the from above the wheel wells about 4-5" down to the body line from each??? Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

01-06-2010, 12:13 AM	#6
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Blazer bed sides and floor for patches like this. Trevor Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

01-05-2010, 11:35 PM	#7
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Blazer bed sides and floor for patches if this helps... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 01-05-2010 at 11:35 PM.

01-06-2010, 12:50 AM	#9
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Blazer bed sides and floor for patches No problem 71BLKSUPER

01-06-2010, 01:04 AM	#10
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Blazer bed sides and floor for patches ill take it..if he passes on those sections he highlighted..I might need the driverside back half of the wheel arch if it fits a suburban __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-06-2010, 03:12 AM	#12
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: Blazer bed sides and floor for patches I am interested in this part if it gets to me. Where the bottom rear of the arch ends, on back. Shipping to 92503, if that helps. Thanks. Also, what is the condition of the tail light section? Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul Last edited by leddzepp; 01-06-2010 at 03:25 AM.

01-06-2010, 03:26 AM	#13
crr26@cox.net Registered User Join Date: Apr 2009 Location: abbeville louisiana Posts: 183	Re: Blazer bed sides and floor for patches hey bud how much for entire bedsides and do you have complete floor the back 3in of mine is rotten

01-06-2010, 07:24 AM	#14
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Blazer bed sides and floor for patches ok cool..can I get a quote on both shipped to 77471..and a quote for just the small piece in case he passes on the arch. either way ill take the small piece __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-06-2010, 01:15 PM	#17
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Blazer bed sides and floor for patches Sik, I guess I only need the driver's side area like this, proably about 8" in front of the arch, about 5" on top, and about 4-5" out back. Preferably cut just below body line in the front about 1" or 2". Trying to keep some warpage down in hard get to spots. I don't know how much Scott (Leddzepp) needs for the piece he wants, but if you can go an 1" or 2" on the backside down from the body line and make the cut, it sure makes my welding easier, but that is up to Scott, as he called that piece. Trevor Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever Last edited by 71blksuper4x4; 01-06-2010 at 01:16 PM.

01-06-2010, 01:53 PM	#18
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: Blazer bed sides and floor for patches I will pass to make it easier for everyone. Thanks! ttt __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

01-06-2010, 03:27 PM	#19
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Blazer bed sides and floor for patches scott, are you sure? Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

01-06-2010, 06:35 PM	#20
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Blazer bed sides and floor for patches I might able to use the rest of the wheel arch on the driver side..let me measure to be sure __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]



Register or Log In To remove these advertisements.

01-06-2010, 09:56 PM	#21
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Blazer bed sides and floor for patches heres the other piece i need...not sure if its still gonna be there. driver side, i need about 2 inches above the body line...and about 3 inches from edge towards the rear...if that makes sense __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 01-06-2010 at 09:57 PM.

01-06-2010, 10:37 PM	#23
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Blazer bed sides and floor for patches Sik, $40 sounds fair, go ahead and get me some measurements on how long and tall and I will guess how heavy it is, and get a ballpark of price of shipping. I will get a measurment tomorrow of what length I need in front and behind the wheel well to cover all my pin holes. I know the rear looks pretty good, but I have a bunch of pin holes around the front of the wheel well on my bed. I am definitely wanting this, but I need to double check my measurments to allow some room for error. Like I said, I will only need the driver's side as my passenger side arch is good. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

01-06-2010, 10:38 PM	#24
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Blazer bed sides and floor for patches what are you using to cut the piece out with? __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

01-08-2010, 12:28 PM	#25
crr26@cox.net Registered User Join Date: Apr 2009 Location: abbeville louisiana Posts: 183	Re: Blazer bed sides and floor for patches Are bthecomplete bedsides still available i am lost wth all the replies

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.