SD Raised dropmember question

[energiesource]

So I was looking at a kit from suicide doors.com and i saw the front raised drop member kit. it says it uses a mustang rack and pinion steering system, but can you use a 67-72 steering column or do you need a mustang steering column?

i emailed them but no response.

[N2TRUX]

You still use the 67-72 column. You will need to modify the shaft and add a u-joint-



Do some research in the suspension section. There are a gazillion posts there about the original "Dropmember" by Porterbuilt and the Dropped Crossmember by Suicide Doors.

[n2billet]

Originally Posted by N2TRUX

You still use the 67-72 column. You will need to modify the shaft and add a u-joint-



Do some research in the suspension section. There are a gazillion posts there about the original "Dropmember" by Porterbuilt and the Dropped Crossmember by Suicide Doors.

You will need 2.) 3/4-36 x 3/4 DD Steering u-joints and 1.) 3/4DD steering shaft about 15 inches or so......just got my in for my Porterbuilt Dropmember which uses the Mustang II rack as well..

[energiesource]

i tried searching but really didnt find anything. only reason id go with the SD kit over porterbuilt is the price.

[lolife99]

Originally Posted by energiesource

i tried searching but really didnt find anything. only reason id go with the SD kit over porterbuilt is the price.

I would do some more reading,...
and then call Nate Porter.

[Shane]

Originally Posted by lolife99

I would do some more reading,...
and then call Nate Porter.

If you have personal experience with BOTH kits and have first-hand information that make one kit superior to the other, then by all means share it with us. But just saying "do some reading, then call so & so" is not really fair and partial advice to all concerned.

[lolife99]

Originally Posted by Shane

If you have personal experience with BOTH kits and have first-hand information that make one kit superior to the other, then by all means share it with us. But just saying "do some reading, then call so & so" is not really fair and partial advice to all concerned.

Excellent point.
I'll delete my post.

[PBFAB.COM]

Originally Posted by Shane

If you have personal experience with BOTH kits and have first-hand information that make one kit superior to the other, then by all means share it with us. But just saying "do some reading, then call so & so" is not really fair and partial advice to all concerned.

Keith has purchased several of my products, including DROPMEMBERS (plural). I would say he is perfectly qualified to suggest somebody call me.

One main difference between the two kits is that the Dropmember comes with installation instructions. The price is the same.

[texastrendz]

porterbuilt=class act

[Shane]

Originally Posted by porterbuilt

Keith has purchased several of my products, including DROPMEMBERS (plural). I would say he is perfectly qualified to suggest somebody call me.

One main difference between the two kits is that the Dropmember comes with installation instructions. The price is the same.

That's all fine and well Nate, but the original poster specifically ASKED about a different product all together thus my earlier reply.

[Shane]

IV. Pure trolling, either to upset someone or simply for your personal
enjoyment, is strictly prohibited. If you're here to cause trouble, it will be a very short stay. Immediate BAN and you will be reported to your ISP.

energiesource IS the original poster ...

My apologies to everyone as my post was not intended at a troll.

[N2TRUX]

Originally Posted by Shane

energiesource IS the original poster ....

I stand corrected on that point.