OR 72 4x4 Blazer Frame and Axles with Title - $250 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drunkbus · 01-12-2010, 06:13 PM

Take everything pictured for $250. Five stock steel wheels and nice straight uncut frame with title.

Cones, wire, and drain pipe not included.

my67chevytruck · 01-12-2010, 10:27 PM

location,location, location

drunkbus · 01-14-2010, 06:34 PM

back to page 1.

**Thealien** · 01-14-2010, 08:07 PM

Wrong coast

drunkbus · 01-26-2010, 05:33 PM

Willing to part out.

original blue lockout hubs - $35 shipped
flat top dana 44 knuckes - $80 shipped
frame with title - $100
5 stock steel wheels $80

budnikguy · 01-26-2010, 10:28 PM

Do you have vin tag with title and frame? Very interested...

Quote:

Originally Posted by drunkbus

Willing to part out.

original blue lockout hubs - $35 shipped
flat top dana 44 knuckes - $80 shipped
frame with title - $100
5 stock steel wheels $80

drunkbus · 01-27-2010, 02:30 AM

Quote:

Originally Posted by budnikguy

Do you have vin tag with title and frame? Very interested...

Unfortunately there is no vin tag. I scrapped the body about 3 years ago and didn't think to remove the vin tag at the time.

budnikguy · 01-27-2010, 10:42 AM

damn...ok. thanks

Quote:

Originally Posted by drunkbus

Unfortunately there is no vin tag. I scrapped the body about 3 years ago and didn't think to remove the vin tag at the time.

drunkbus · 01-26-2010, 05:37 PM

I may be willing to ship the wheels if you cover shipping or if you have something of greater value to trade I might cover shipping.

Mt Man Chad · 01-26-2010, 06:27 PM

I'm interested in the whole thing when I get home next week!

drunkbus · 01-27-2010, 02:33 AM

Have someone local taking the leaf springs and front and rear diffs. Should just be the bare frame and the wheels after this weekend. I'll update this when I know for sure.

newagecustom · 01-27-2010, 08:35 PM

What about all the front and rear leaf spring hangers?

drunkbus · 01-27-2010, 09:21 PM

Quote:

Originally Posted by newagecustom

What about all the front and rear leaf spring hangers?

The pieces riveted to the frame? If that's what you're wanting, I can check when I'm out there this weekend. I think the two rear ones may have been hit a little bit with a grinder when I was taking off a trailer hitch that was welded to the frame. I'll take some pictures.

newagecustom · 01-29-2010, 06:41 PM

Yes all 8 that are riveted. If you want to you could just torch off the sections that they are riveted too, provided someone doesn't want to buy the frame.

drunkbus · 01-30-2010, 01:46 PM

Quote:

Originally Posted by newagecustom

Yes all 8 that are riveted. If you want to you could just torch off the sections that they are riveted too, provided someone doesn't want to buy the frame.

How does $80 for all 8 shipped to you sound? I will get pictures tomorrow but probably wouldn't be able to get them off until next weekend.

Mt Man Chad · 01-31-2010, 10:33 PM

Still very much game....
I sent PM for complete package!

Cheers
Chad

drunkbus · 02-01-2010, 02:11 PM

Update: Parting this out is on hold. I will give Chad the chance to take the whole package. If this doesn't work out I will part it out.

Mt Man Chad · 02-01-2010, 06:28 PM

Shaun

I just talked with my boss and I will be working in Santa Barbara for another two or three weeks depending on the project.

If you can sell the 72 frame to someone else do so.
I would love to have it but bad timing for me being in SoCal for work.

Sorry!
Chad

drunkbus · 02-06-2010, 04:24 PM

pics for newagecustom.

drunkbus · 02-06-2010, 04:26 PM

Back up for parts. Body mount brackets are all good.

drunkbus · 02-06-2010, 04:36 PM

Can a moderator move this to the Blazer parts section? Thanks.

**71blksuper4x4** · 03-13-2010, 08:29 PM

Did you happen to sell your lockouts? I picked up a 70' and am more interested in them now. Trevor

**bigdon-70blazer** · 03-14-2010, 10:41 AM

Any exhaust hanger brackets? Near the middle part of driver side of frame. Pics of that section please?

drunkbus · 03-15-2010, 02:11 PM

Quote:

Originally Posted by bigdon-70blazer

Any exhaust hanger brackets? Near the middle part of driver side of frame. Pics of that section please?

Are these what your looking for?

**bigdon-70blazer** · 03-16-2010, 06:16 PM

Quote:

Originally Posted by drunkbus

Are these what your looking for?

Yes those are what I need. Price? Shipped to 63901...

01-12-2010, 06:13 PM	#1
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	72 4x4 Blazer Frame and Axles with Title - NOW WILLING TO PART OUT Take everything pictured for $250. Five stock steel wheels and nice straight uncut frame with title. Cones, wire, and drain pipe not included. Attached Images Last edited by drunkbus; 01-26-2010 at 07:22 PM. Reason: updated

01-12-2010, 10:27 PM	#2
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 72 4x4 Blazer Frame and Axles with Title - $250 location,location, location __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

01-14-2010, 06:34 PM	#3
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: 72 4x4 Blazer Frame and Axles with Title - $250 back to page 1.

01-14-2010, 08:07 PM	#4
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: 72 4x4 Blazer Frame and Axles with Title - $250 Wrong coast __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

01-26-2010, 05:33 PM	#5
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: 72 4x4 Blazer Frame and Axles with Title - $250 Willing to part out. original blue lockout hubs - $35 shipped flat top dana 44 knuckes - $80 shipped frame with title - $100 5 stock steel wheels $80

01-26-2010, 05:37 PM	#9
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: 72 4x4 Blazer Frame and Axles with Title - $250 I may be willing to ship the wheels if you cover shipping or if you have something of greater value to trade I might cover shipping.

01-26-2010, 06:27 PM	#10
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: 72 4x4 Blazer Frame and Axles with Title - $250 I'm interested in the whole thing when I get home next week! __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

01-27-2010, 02:33 AM	#11
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: 72 4x4 Blazer Frame and Axles with Title - $250 Have someone local taking the leaf springs and front and rear diffs. Should just be the bare frame and the wheels after this weekend. I'll update this when I know for sure.

01-27-2010, 08:35 PM	#12
newagecustom c10 Chop Artist Join Date: Feb 2007 Location: az Posts: 481	Re: 72 4x4 Blazer Frame and Axles with Title - $250 What about all the front and rear leaf spring hangers?

01-29-2010, 06:41 PM	#14
newagecustom c10 Chop Artist Join Date: Feb 2007 Location: az Posts: 481	Re: 72 4x4 Blazer Frame and Axles with Title - $250 Yes all 8 that are riveted. If you want to you could just torch off the sections that they are riveted too, provided someone doesn't want to buy the frame.

01-31-2010, 10:33 PM	#16
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: 72 4x4 Blazer Frame and Axles with Title - $250 Still very much game.... I sent PM for complete package! Cheers Chad __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

02-01-2010, 02:11 PM	#17
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: 72 4x4 Blazer Frame and Axles with Title - $250 Update: Parting this out is on hold. I will give Chad the chance to take the whole package. If this doesn't work out I will part it out.

02-01-2010, 06:28 PM	#18
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: 72 4x4 Blazer Frame and Axles with Title - $250 Shaun I just talked with my boss and I will be working in Santa Barbara for another two or three weeks depending on the project. If you can sell the 72 frame to someone else do so. I would love to have it but bad timing for me being in SoCal for work. Sorry! Chad __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread Last edited by Mt Man Chad; 02-06-2010 at 03:19 PM.

02-06-2010, 04:24 PM	#19
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: 72 4x4 Blazer Frame and Axles with Title - $250 pics for newagecustom. Attached Images

02-06-2010, 04:26 PM	#20
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: 72 4x4 Blazer Frame and Axles with Title - $250 Back up for parts. Body mount brackets are all good.



Register or Log In To remove these advertisements.

02-06-2010, 04:36 PM	#21
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: 72 4x4 Blazer Frame and Axles with Title - $250 Can a moderator move this to the Blazer parts section? Thanks.

03-13-2010, 08:29 PM	#22
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: 72 4x4 Blazer Frame and Axles with Title - $250 Did you happen to sell your lockouts? I picked up a 70' and am more interested in them now. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

03-14-2010, 10:41 AM	#23
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: 72 4x4 Blazer Frame and Axles with Title - $250 Any exhaust hanger brackets? Near the middle part of driver side of frame. Pics of that section please?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.