what headers for ls swap? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chas350 · 01-19-2010, 06:50 PM

What headers are you guys running with an LS swap in the 67-72 K series?

msgross · 01-19-2010, 08:55 PM

not many guys have done this as far as I know.. lots of 2WD guys have...

sorry for the lack of info

boostat4500 · 01-21-2010, 01:24 AM

When I first did my swap, I used Hedman block hugger headers. I then switched to a set of Pacesetter LT's for a 99-06' truck. Those required notching the frame and modifying the collector to clear the shackles. Right now I have a set of Doug Thorley LS swap headers on order. I'm hoping they will fit, even with the frame filled back in. I asked everywhere, including Thorley themselves, and no one knows for sure if they work on a 4X. Doug Thorley did tell me though that to the best of their knowledge, they will.

chas350 · 01-23-2010, 08:23 PM

Quote:

Originally Posted by boostat4500

When I first did my swap, I used Hedman block hugger headers. I then switched to a set of Pacesetter LT's for a 99-06' truck. Those required notching the frame and modifying the collector to clear the shackles. Right now I have a set of Doug Thorley LS swap headers on order. I'm hoping they will fit, even with the frame filled back in. I asked everywhere, including Thorley themselves, and no one knows for sure if they work on a 4X. Doug Thorley did tell me though that to the best of their knowledge, they will.

Thanks! please let me know how they fit.
charlie

racin69z · 01-24-2010, 07:54 AM

I would be afraid to think how to make some fit. I don't see how you could do the swap without a suspension lift. I have an 8" suspension lift on my truck, and the oil pan is only about 8-10" away from the front differential with motor slightly tilted to the back and the transfer case raised 2" off the crossmember.

Lynn

boostat4500 · 01-25-2010, 08:28 PM

racin69z- What are you afraid wouldn't fit? The headers? Where do you think there would be a clearance issue?

**Thealien** · 01-25-2010, 08:56 PM

oil pan, crossmember with the front differential.

I am trying to do it without a lift now!

racin69z · 01-26-2010, 11:02 AM

When I put mine in, I had my transfer case in the stock position and the stock engine crossmember in. I ran into oil pan clearance issues with the stock engine crossmember. I wound up building a new engine crossmember. I wound up raising the transfer case up 2" to level the motor. I could not have done it without the body lift.

As far as headers, I never really looked because mine go up above the frame. I did measure and the LS motor is about 2" wider than a standard small block.

Lynn

chas350 · 01-26-2010, 02:23 PM

Anybody else?

01-19-2010, 06:50 PM	#1
chas350 Registered User Join Date: Mar 2007 Location: Connecticut Posts: 581	what headers for ls swap? What headers are you guys running with an LS swap in the 67-72 K series? __________________ "I'll Procrastinate Tomorrow" quote by LEEVON 71 K10 long fleet (sons truck) new 370hp 355, sm465 np205, 3.73's 33's 70 K20 long fleet 98 G3500 work van

01-19-2010, 08:55 PM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: what headers for ls swap? not many guys have done this as far as I know.. lots of 2WD guys have... sorry for the lack of info __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-21-2010, 01:24 AM	#3
boostat4500 Registered User Join Date: Aug 2006 Location: Reno, NV Posts: 346	Re: what headers for ls swap? When I first did my swap, I used Hedman block hugger headers. I then switched to a set of Pacesetter LT's for a 99-06' truck. Those required notching the frame and modifying the collector to clear the shackles. Right now I have a set of Doug Thorley LS swap headers on order. I'm hoping they will fit, even with the frame filled back in. I asked everywhere, including Thorley themselves, and no one knows for sure if they work on a 4X. Doug Thorley did tell me though that to the best of their knowledge, they will. __________________ 1971 Suburban 4x4, LQ4 6.0L, 4L80E, etc.

01-24-2010, 07:54 AM	#5
racin69z Registered User Join Date: Sep 2007 Location: jackson MO Posts: 143	Re: what headers for ls swap? I would be afraid to think how to make some fit. I don't see how you could do the swap without a suspension lift. I have an 8" suspension lift on my truck, and the oil pan is only about 8-10" away from the front differential with motor slightly tilted to the back and the transfer case raised 2" off the crossmember. Lynn

01-25-2010, 08:28 PM	#6
boostat4500 Registered User Join Date: Aug 2006 Location: Reno, NV Posts: 346	Re: what headers for ls swap? racin69z- What are you afraid wouldn't fit? The headers? Where do you think there would be a clearance issue? __________________ 1971 Suburban 4x4, LQ4 6.0L, 4L80E, etc.

01-25-2010, 08:56 PM	#7
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: what headers for ls swap? oil pan, crossmember with the front differential. I am trying to do it without a lift now! __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

01-26-2010, 11:02 AM	#8
racin69z Registered User Join Date: Sep 2007 Location: jackson MO Posts: 143	Re: what headers for ls swap? When I put mine in, I had my transfer case in the stock position and the stock engine crossmember in. I ran into oil pan clearance issues with the stock engine crossmember. I wound up building a new engine crossmember. I wound up raising the transfer case up 2" to level the motor. I could not have done it without the body lift. As far as headers, I never really looked because mine go up above the frame. I did measure and the LS motor is about 2" wider than a standard small block. Lynn

01-26-2010, 02:23 PM	#9
chas350 Registered User Join Date: Mar 2007 Location: Connecticut Posts: 581	Re: what headers for ls swap? Anybody else? __________________ "I'll Procrastinate Tomorrow" quote by LEEVON 71 K10 long fleet (sons truck) new 370hp 355, sm465 np205, 3.73's 33's 70 K20 long fleet 98 G3500 work van

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.