How do you change the window felt? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevy2wd · 01-29-2010, 03:14 PM

I am changing all the seals for the windows on my doors. I have figured every seal out except the felt one attached to the vent window. How do you go about removing the old one?

**Classic Heartbeat** · 01-29-2010, 03:22 PM

You cut the cloth at the edges and scrape it out. The new ones glue into the channel once you have it cleaned up. WES

67chevy2wd · 01-29-2010, 05:42 PM

what do I use to glue it in

**Classic Heartbeat** · 01-29-2010, 05:57 PM

Any good weatherstrip glue. Gorilla, 3m, All parts stores sell it. Just do not use silicone based adheisives. WES

rodstored-72 · 01-29-2010, 06:12 PM

i hope this is not hijacking.... but i was wondering if that seal is a repop part & if you buy it does it come with everything needed to replace the old existing ones (minus the "glue")? also Wes by chance do you offer the replacement(s)??

thanks!!

**Classic Heartbeat** · 01-29-2010, 06:38 PM

Yes I do offer the replacements. The division bar felt (the one we are talking about here) just gets glued into the channel. No other parts needed. The channel run is a friction fit that does not require adheisive of any sort. The squeegee, and fuzzy otherwise known as the anti rattle set comes with the clips needed preinstalled. WES

1-PU70 · 01-29-2010, 06:46 PM

When you replace the division bar felt does the door glass (the glass that goes up and down) have to be removed?

**Classic Heartbeat** · 01-29-2010, 07:48 PM

Yes it does. The Vent window assembly should be removed to ensure propper cleaning and installation. WES

D-Rat · 01-30-2010, 07:55 PM

since we're on topic, can the outer window seal on the door at the bottom of the window be replaced without window removal? Looks like it just pushes in. Does it also have to be glued?

Getting water in my door when it rains, and it bubbled my door panel a bit (Grrrr!)

67chevy2wd · 01-30-2010, 08:16 PM

Quote:

Originally Posted by D-Rat

since we're on topic, can the outer window seal on the door at the bottom of the window be replaced without window removal? Looks like it just pushes in. Does it also have to be glued?

Getting water in my door when it rains, and it bubbled my door panel a bit (Grrrr!)

Yes, they just clip in. The old ones were hard to remove though. Maybe someone else has a tip on how to remove them.

Diablo de la Noche · 01-30-2010, 10:01 PM

I don't mean to hijack the string, but it seems to fit really well.
Had to discontinue my project for a couple months, so can't remember the particulars. But, when I put in my vent window rubber, it seemed really difficult to seat at the bottom corner. I figured it would seat itself after a little while but it didn't. Now, with the vent window all put together (on the door and everything), the bottom of the rubber seal bows out/up at the bottom. What can be done?

01-29-2010, 03:14 PM	#1
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	How do you change the window felt? I am changing all the seals for the windows on my doors. I have figured every seal out except the felt one attached to the vent window. How do you go about removing the old one? __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban

01-29-2010, 03:22 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,768	Re: How do you change the window felt? You cut the cloth at the edges and scrape it out. The new ones glue into the channel once you have it cleaned up. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

01-29-2010, 05:42 PM	#3
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	Re: How do you change the window felt? what do I use to glue it in __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban

01-29-2010, 05:57 PM	#4
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,768	Re: How do you change the window felt? Any good weatherstrip glue. Gorilla, 3m, All parts stores sell it. Just do not use silicone based adheisives. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

01-29-2010, 06:12 PM	#5
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 2,003	Re: How do you change the window felt? i hope this is not hijacking.... but i was wondering if that seal is a repop part & if you buy it does it come with everything needed to replace the old existing ones (minus the "glue")? also Wes by chance do you offer the replacement(s)?? thanks!!

01-29-2010, 06:38 PM	#6
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,768	Re: How do you change the window felt? Yes I do offer the replacements. The division bar felt (the one we are talking about here) just gets glued into the channel. No other parts needed. The channel run is a friction fit that does not require adheisive of any sort. The squeegee, and fuzzy otherwise known as the anti rattle set comes with the clips needed preinstalled. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 01-29-2010 at 06:39 PM.

01-29-2010, 06:46 PM	#7
1-PU70 Registered User Join Date: Apr 2000 Location: Bradenton, FL Posts: 1,036	Re: How do you change the window felt? When you replace the division bar felt does the door glass (the glass that goes up and down) have to be removed? __________________ 1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters

01-29-2010, 07:48 PM	#8
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,768	Re: How do you change the window felt? Yes it does. The Vent window assembly should be removed to ensure propper cleaning and installation. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

01-30-2010, 07:55 PM	#9
D-Rat Registered User Join Date: Nov 2009 Location: Mesa, AZ Posts: 226	Re: How do you change the window felt? since we're on topic, can the outer window seal on the door at the bottom of the window be replaced without window removal? Looks like it just pushes in. Does it also have to be glued? Getting water in my door when it rains, and it bubbled my door panel a bit (Grrrr!) __________________ 1970 CST with a screaming 400 www.nissan4wheelers.com

01-30-2010, 10:01 PM	#11
Diablo de la Noche Registered User Join Date: Jul 2009 Location: El Paso, Texas Posts: 142	Re: How do you change the window felt? I don't mean to hijack the string, but it seems to fit really well. Had to discontinue my project for a couple months, so can't remember the particulars. But, when I put in my vent window rubber, it seemed really difficult to seat at the bottom corner. I figured it would seat itself after a little while but it didn't. Now, with the vent window all put together (on the door and everything), the bottom of the rubber seal bows out/up at the bottom. What can be done? __________________ www.coolmoodart.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.