Bench seat, lower foam question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JimKshortstep4x4 · 01-31-2010, 06:35 AM

Does anyone sell just the lower bench seat foam? Most vendors appear to sell both upper and lower only. I just need the lower foam.

Any ideas?

Jim

Hottrucks · 01-31-2010, 09:23 AM

there are a few posts on rebuilding your seat foam you may want to do a search...I saved on out of a truck I was scrapping because my seat bottom is junk...I wish I could buy the lower seat cover??? what do you think the odds of that happening are....and in the right color...LMAO

cdowns · 01-31-2010, 09:56 AM

yry a local upholstery shop[

JimKshortstep4x4 · 01-31-2010, 10:46 AM

I have tried the local shops. The shops here could not repair the foam or replace it. I will try some shops in Grand Rapids as I may have better luck then with the folks here.

Jim

71meangreenc10 · 01-31-2010, 11:12 AM

I have a set in the garage, let me look at it and see the condition, it was good when I took the seat a part a couple of years ago.

Smitty

**PICKMUP** · 01-31-2010, 06:18 PM

I sell just the lower---USA made---nice & firm so you sit up high like when new.
PM me for details, if I don't get back to here.

stevewhitmore · 01-31-2010, 07:13 PM

In my 69 that I picked up a year ago , the bench seat foam feels OK under the cloth cover but the thing is REALLY bouncy so do you think I have a foam or spring issue?
I don't know what a correct one feels like
The local upholstery shop said he could do foam, springs and cover for $400

JimKshortstep4x4 · 01-31-2010, 09:09 PM

I definitely have a foam problem as it has been repaired twice and the foam is deteriorating.

PM sent to PICKMUP.

Jim

**LUCKTRUCK** · 02-01-2010, 09:34 PM

I got mine from PICKMUP, nice quality foam!!

01-31-2010, 06:35 AM	#1
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Bench seat, lower foam question Does anyone sell just the lower bench seat foam? Most vendors appear to sell both upper and lower only. I just need the lower foam. Any ideas? Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

01-31-2010, 09:23 AM	#2
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: Bench seat, lower foam question there are a few posts on rebuilding your seat foam you may want to do a search...I saved on out of a truck I was scrapping because my seat bottom is junk...I wish I could buy the lower seat cover??? what do you think the odds of that happening are....and in the right color...LMAO __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

01-31-2010, 09:56 AM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Bench seat, lower foam question yry a local upholstery shop[ __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

01-31-2010, 10:46 AM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Bench seat, lower foam question I have tried the local shops. The shops here could not repair the foam or replace it. I will try some shops in Grand Rapids as I may have better luck then with the folks here. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

01-31-2010, 11:12 AM	#5
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,159	Re: Bench seat, lower foam question I have a set in the garage, let me look at it and see the condition, it was good when I took the seat a part a couple of years ago. Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 71 C20 Longhorn/Ole Yellor 69 C30 Former Motor Home, Flat Bed time

01-31-2010, 06:18 PM	#6
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,126	Re: Bench seat, lower foam question I sell just the lower---USA made---nice & firm so you sit up high like when new. PM me for details, if I don't get back to here.

01-31-2010, 07:13 PM	#7
stevewhitmore Registered User Join Date: Mar 2009 Location: Harpers Ferry, W VA Posts: 144	Re: Bench seat, lower foam question In my 69 that I picked up a year ago , the bench seat foam feels OK under the cloth cover but the thing is REALLY bouncy so do you think I have a foam or spring issue? I don't know what a correct one feels like The local upholstery shop said he could do foam, springs and cover for $400

01-31-2010, 09:09 PM	#8
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Bench seat, lower foam question I definitely have a foam problem as it has been repaired twice and the foam is deteriorating. PM sent to PICKMUP. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

02-01-2010, 09:34 PM	#9
LUCKTRUCK Senior Member Join Date: May 2007 Location: new jersey Posts: 606	Re: Bench seat, lower foam question I got mine from PICKMUP, nice quality foam!! __________________ LUCKTRUCK

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.