SC WTB: NP205 for T350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gregbr · 03-07-2010, 01:27 AM

Must be near Rock Hill, SC (below Charlotte NC) or you are willing to meet me or deliver to Charlotte Swap Meet weekend of April 9th. Looking for a NP205 for a Turbo 350 for my 67 Chevy K10, must be complete with adaptor. Would consider a NP205 & T400 package. I'm replacing a NP203 that somebody put in. The NP203 has a rear slip yoke, and the front yoke has the 2 u-bolts. Let me know what you have. Thanks!!

billsbowtie · 03-07-2010, 10:34 AM

i have a used one that i don't know amything about looks ok & a extra one that has a cracked case both for $75.00 without the adapter or $175.00 with it. if we could find someone that would bring it to you. i am not sure if i will get to come to the charlotte show.

gregbr · 03-07-2010, 11:08 PM

I see that you deliver within 200 miles for gas $$. How far away are you and how much you think the gas would be. I can meet you, but can't venture too far, had surgery recently and DR told me not to drive far. Let me know. What type yokes does your's have. Will I need to try to find an original shortbed rear driveshaft that bolts on?

**Hart_Rod** · 03-07-2010, 11:40 PM

I think I might have both of the driveshafts. Do you have pictures of what you need?

gregbr · 03-08-2010, 12:16 AM

No Rob. It depends on the yokes on the 205 I think. I need to see what is on the 205 then go from there. I listed what I currently have in the first post. I think my fornt shaft may be original. What do you have?

I want to make sure I'm looking at a 205 before making a deal. I thought I had found one local, a guy had an ad in the paper for 2 different 205's. When I got to the place both turned out to be a 203, he had no idea. Most of the guys here are experts on these parts, so I don't think I will have any problem.

**Hart_Rod** · 03-08-2010, 10:17 AM

Quote:

Originally Posted by gregbr

No Rob. It depends on the yokes on the 205 I think. I need to see what is on the 205 then go from there. I listed what I currently have in the first post. I think my fornt shaft may be original. What do you have?

I want to make sure I'm looking at a 205 before making a deal. I thought I had found one local, a guy had an ad in the paper for 2 different 205's. When I got to the place both turned out to be a 203, he had no idea. Most of the guys here are experts on these parts, so I don't think I will have any problem.

Here's pictures of what I have.

billsbowtie · 03-08-2010, 01:33 AM

my parts are off of a 71 & 72 blazer i could meet you in weaversville nc about 10 mins north of asheville off of I-26. i am about 3 hours from exit 19 . but that is about 2 to 2 1/2 hours 1 way for you also . it would be about $60.00 in gas it is $2.67 a gal here today. let me know if this is to far for you? bill

gregbr · 03-08-2010, 01:01 PM

Bill, I think that's too far right now. Maybe in a month or so if I don't find one closer.

Rob, Any idea what they came off of? What's the price for both?

**Hart_Rod** · 03-08-2010, 01:12 PM

Quote:

Originally Posted by gregbr

Bill, I think that's too far right now. Maybe in a month or so if I don't find one closer.

Rob, Any idea what they came off of? What's the price for both?

They came off of a 72 CST 4 x 4 Blazer. I would like to get $180 + shipping for both.

billsbowtie · 03-08-2010, 01:53 PM

ok thanks.

-T- · 03-08-2010, 08:28 PM

you have a PM

Huck · 03-09-2010, 09:47 AM

I have a NP205 with turbo 350 adapter complete with crossmember---also have the matching turbo 350 trans--both front a rear axles----and will be coming to the Charlotte show or could probably drop it off as I will be staying down my Matthews for the weekend. All of this came from 1972 Chev Blazer and should be pretty much a bolt in.
If interested---send me a pm and we can discuss. $300 buys it all.

my67chevytruck · 03-09-2010, 09:50 AM

Heck of a deal Huck, wish you were not 13 hrs from me......

gregbr · 03-09-2010, 11:25 PM

Rob, Think I have to pass for now anyway. I don't think the rear shaft will work from a blazer, it would be a couple inches short.

Huck, IS the $300 for just the xfer and adaptor?

T, PM sent.

olblue60@aol.com · 03-10-2010, 08:59 AM

If you contact member "Duallyjams " He has a couple in good shape and has been talking about going to that meet.

John

70jimmy · 03-10-2010, 10:16 PM

I have a couple, one out of a 72 Blazer and one out of a 72 K20 both with adapters. I can deliver for gas $. If you want pics let me know.

gregbr · 03-10-2010, 11:11 PM

70jimmy, What's the prices on them. Do you have the rear driveshaft from the K20 or the proper shortbed rear shaft? Wouldn't mind a pic. Is there a coupler in the adaptor for a 205?

70jimmy · 03-11-2010, 09:47 PM

Both couplers are still bolted to the 205s. PM me your address and I'll send pics in the AM.

gregbr · 03-11-2010, 11:32 PM

Will be deciding on which one shortly. Thanks for being patient.

gregbr · 03-13-2010, 09:38 PM

Thanks 70jimmy....

PM sent to Huck

03-07-2010, 01:27 AM	#1
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	WTB: NP205 for T350 Must be near Rock Hill, SC (below Charlotte NC) or you are willing to meet me or deliver to Charlotte Swap Meet weekend of April 9th. Looking for a NP205 for a Turbo 350 for my 67 Chevy K10, must be complete with adaptor. Would consider a NP205 & T400 package. I'm replacing a NP203 that somebody put in. The NP203 has a rear slip yoke, and the front yoke has the 2 u-bolts. Let me know what you have. Thanks!! __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

03-07-2010, 10:34 AM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: NP205 for T350 i have a used one that i don't know amything about looks ok & a extra one that has a cracked case both for $75.00 without the adapter or $175.00 with it. if we could find someone that would bring it to you. i am not sure if i will get to come to the charlotte show. __________________ i have 67/72 chevy truck parts f/s.

03-07-2010, 11:08 PM	#3
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: WTB: NP205 for T350 I see that you deliver within 200 miles for gas $$. How far away are you and how much you think the gas would be. I can meet you, but can't venture too far, had surgery recently and DR told me not to drive far. Let me know. What type yokes does your's have. Will I need to try to find an original shortbed rear driveshaft that bolts on? __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

03-07-2010, 11:40 PM	#4
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: WTB: NP205 for T350 I think I might have both of the driveshafts. Do you have pictures of what you need? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-08-2010, 12:16 AM	#5
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: WTB: NP205 for T350 No Rob. It depends on the yokes on the 205 I think. I need to see what is on the 205 then go from there. I listed what I currently have in the first post. I think my fornt shaft may be original. What do you have? I want to make sure I'm looking at a 205 before making a deal. I thought I had found one local, a guy had an ad in the paper for 2 different 205's. When I got to the place both turned out to be a 203, he had no idea. Most of the guys here are experts on these parts, so I don't think I will have any problem. __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424 Last edited by gregbr; 03-08-2010 at 12:23 AM.

03-08-2010, 01:33 AM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: NP205 for T350 my parts are off of a 71 & 72 blazer i could meet you in weaversville nc about 10 mins north of asheville off of I-26. i am about 3 hours from exit 19 . but that is about 2 to 2 1/2 hours 1 way for you also . it would be about $60.00 in gas it is $2.67 a gal here today. let me know if this is to far for you? bill __________________ i have 67/72 chevy truck parts f/s. Last edited by billsbowtie; 03-08-2010 at 01:35 AM.

03-08-2010, 01:01 PM	#8
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: WTB: NP205 for T350 Bill, I think that's too far right now. Maybe in a month or so if I don't find one closer. Rob, Any idea what they came off of? What's the price for both? __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

03-08-2010, 01:53 PM	#10
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: NP205 for T350 ok thanks. __________________ i have 67/72 chevy truck parts f/s.

03-08-2010, 08:28 PM	#11
-T- Registered User Join Date: Oct 2009 Location: Easley, SC Posts: 130	Re: WTB: NP205 for T350 you have a PM

03-09-2010, 09:47 AM	#12
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: WTB: NP205 for T350 I have a NP205 with turbo 350 adapter complete with crossmember---also have the matching turbo 350 trans--both front a rear axles----and will be coming to the Charlotte show or could probably drop it off as I will be staying down my Matthews for the weekend. All of this came from 1972 Chev Blazer and should be pretty much a bolt in. If interested---send me a pm and we can discuss. $300 buys it all.

03-09-2010, 09:50 AM	#13
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: WTB: NP205 for T350 Heck of a deal Huck, wish you were not 13 hrs from me...... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

03-09-2010, 11:25 PM	#14
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: WTB: NP205 for T350 Rob, Think I have to pass for now anyway. I don't think the rear shaft will work from a blazer, it would be a couple inches short. Huck, IS the $300 for just the xfer and adaptor? T, PM sent. __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

03-10-2010, 08:59 AM	#15
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: WTB: NP205 for T350 If you contact member "Duallyjams " He has a couple in good shape and has been talking about going to that meet. John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

03-10-2010, 10:16 PM	#16
70jimmy Registered User Join Date: May 2000 Location: Darlington SC Posts: 115	Re: WTB: NP205 for T350 I have a couple, one out of a 72 Blazer and one out of a 72 K20 both with adapters. I can deliver for gas $. If you want pics let me know. __________________ 1972 CST Blazer 350/350/205 tilt, ac, white with blue highlander plaid interior 1972 CST Jimmy 350/4speed/205 med red with black interior 1972 K20 Custom Deluxe 350/4speed/205 white/ochre/white/ochre 1972 CST Blazer 350/350/205 tach, ac, warn 5687 winch, light yellow with saddle interior 1972 CST Jimmy 350/4speed/205 dark olive with olive interior

03-10-2010, 11:11 PM	#17
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: WTB: NP205 for T350 70jimmy, What's the prices on them. Do you have the rear driveshaft from the K20 or the proper shortbed rear shaft? Wouldn't mind a pic. Is there a coupler in the adaptor for a 205? __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424



Register or Log In To remove these advertisements.

03-11-2010, 09:47 PM	#18
70jimmy Registered User Join Date: May 2000 Location: Darlington SC Posts: 115	Re: WTB: NP205 for T350 Both couplers are still bolted to the 205s. PM me your address and I'll send pics in the AM. __________________ 1972 CST Blazer 350/350/205 tilt, ac, white with blue highlander plaid interior 1972 CST Jimmy 350/4speed/205 med red with black interior 1972 K20 Custom Deluxe 350/4speed/205 white/ochre/white/ochre 1972 CST Blazer 350/350/205 tach, ac, warn 5687 winch, light yellow with saddle interior 1972 CST Jimmy 350/4speed/205 dark olive with olive interior

03-11-2010, 11:32 PM	#19
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: WTB: NP205 for T350 Will be deciding on which one shortly. Thanks for being patient. __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

03-13-2010, 09:38 PM	#20
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: WTB: NP205 for T350 Thanks 70jimmy.... PM sent to Huck __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.