64-66 chrome hubcaps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hb32 · 03-09-2010, 08:37 PM

I have a lead on some nos chrome 64-66 hubcaps what are they worth?

markeb01 · 03-09-2010, 10:41 PM

Chevy Duty has new ones for $52 each, so I'd assume something a lot less than that for good used ones unless they are NOS mint:

http://www.classicparts.com/1964-66-...ctinfo/64-029/

I see you mentioned NOS, so at that point it becomes a matter of condition and desire. NOS doesn't always mean perfect. Many NOS items are scratched, dented or have significant "shelf wear".

hb32 · 03-10-2010, 12:23 AM

Have not seen them yet but will post when I get them.

Revoh · 03-10-2010, 01:08 PM

I don't know how much those are, but if they were from a '61-'63, they'd be worth like a hundred and seventy-five thousand dollars.

**special-K** · 03-11-2010, 08:15 PM

Figure mint N.O.S. is worth at least double repro.

hb32 · 04-25-2010, 04:56 PM

Finally managed to hook up with the seller this morning and got the caps. They appear to be nos, 3 are near perfect. One, bottom right, has some small dents so not perfect but a good 8 out of 10 on it. They have 3839982 I suspect part number on them.

**aerotruk63** · 04-25-2010, 05:11 PM

Do your wheels have clips? That will be a deciding factor pretty quick!

hb32 · 04-25-2010, 05:13 PM

Quote:

Originally Posted by aerotruk63

Do your wheels have clips? That will be a deciding factor pretty quick!

No they don`t and these are the right ones for my wheels. See post below.

**aerotruk63** · 04-25-2010, 05:26 PM

Have you tried them on yet? Would dress up the truck real nice. Post a picture with them on.

collins10672 · 04-26-2010, 04:12 AM

those hubcaps are very nice,but they will not fit trucks with rims that have the 3 bumps around where the hubcap pops on.they look to me like 3/4 ton hubcaps.they will fit rims with the clips on them,but not the 1/2 ton style.also being chrome and 3/4 ton style these would be very very rare.nice find.

hb32 · 04-26-2010, 11:26 AM

Quote:

Originally Posted by collins10672

those hubcaps are very nice,but they will not fit trucks with rims that have the 3 bumps around where the hubcap pops on.they look to me like 3/4 ton hubcaps.they will fit rims with the clips on them,but not the 1/2 ton style.also being chrome and 3/4 ton style these would be very very rare.nice find.

Absolutely right collins10672!! Just had a second look at them, pulled one of my caps and they are indeed different. One of the caps has " fits 64-65 16x5 wheel " on it and never caught on until your post.

*LILRED66* · 04-26-2010, 04:51 AM

The only chrome dog dish hub caps being reproduced are for the wheels with the bumps, not the clips, so you have a rare set, indeed. The 1/2 ton and 3/4 ton wheels were available with the bumps and with the clips. The diameter of the cap will determine if your caps fit 1/2 ton wheels with clips or 3/4 ton wheels with clips. If your wheels do not have clips, these caps will not fit.

hb32 · 04-30-2010, 03:41 PM

Quote:

Originally Posted by LILRED66

The only chrome dog dish hub caps being reproduced are for the wheels with the bumps, not the clips, so you have a rare set, indeed. The 1/2 ton and 3/4 ton wheels were available with the bumps and with the clips. The diameter of the cap will determine if your caps fit 1/2 ton wheels with clips or 3/4 ton wheels with clips. If your wheels do not have clips, these caps will not fit.

What diameter should they be for 1/2 or for 3/4 ton wheels? Trying to figure out what I actually have before I move them to someone who can use them.

dracko · 04-26-2010, 11:32 AM

Edited by Moderator

**aerotruk63** · 04-26-2010, 07:45 PM

I have 4 old 16" rims with clips but out where you are, there should be some around. Shipping is hell these days. KMS Tools might take them in trade! Actually the two black rims under the white one comes from their store in Burnaby.

**62 Longbed** · 04-27-2010, 03:04 AM

Here is a picture of my 66 with the hubcaps on .. My wheels are 16.5 , I have the clips .. Love the look on my 3/4 ton ... I've been thinking of getting another set .. Paid $85.00 for all (4) .. have a line on 2-more .

hb32 · 04-27-2010, 11:12 AM

Quote:

Originally Posted by 62 Longbed

Here is a picture of my 66 with the hubcaps on .. My wheels are 16.5 , I have the clips .. Love the look on my 3/4 ton ... I've been thinking of getting another set .. Paid $85.00 for all (4) .. have a line on 2-more .

That was a good deal!! I paid substantially more for these because they were nos.

**62 Longbed** · 04-27-2010, 03:28 PM

No, don't get me wrong ... I was refering to what I paid for mine and not trying to low ball you or make it sound like you didn't do well .. Mine also aren't NOS .. But still a very nice set you have ..

hb32 · 04-27-2010, 08:14 PM

Quote:

Originally Posted by 62 Longbed

No, don't get me wrong ... I was refering to what I paid for mine and not trying to low ball you or make it sound like you didn't do well .. Mine also aren't NOS .. But still a very nice set you have ..

No problem 62 Longbed. My 65 short step came from Eugene Oregon. I also brought a Boler trailer back from there a couple of weeks ago. Still looking for a 65-66 short fleet with a big back window and hope to find one in Oregon.

jonzcustomshop · 04-27-2010, 05:29 PM

those are also 64-65, the 66's have a ridge around the + shape of the hubcap.

the story is(I found on a thread here somewhere) is that the ridge helped keep the cap from denting when you pushed it on to the wheel.
the repop cap is the stronger one with the ridge.

hb32 · 04-27-2010, 08:11 PM

Quote:

Originally Posted by jonzcustomshop

those are also 64-65, the 66's have a ridge around the + shape of the hubcap.

the story is(I found on a thread here somewhere) is that the ridge helped keep the cap from denting when you pushed it on to the wheel.
the repop cap is the stronger one with the ridge.

Thanks for the ident info...learn something new everyday!

**aerotruk63** · 04-30-2010, 06:28 PM

7 9/16 inner diameter fits 15" AND 16" wheels for 1/2 ton with clips. 8 13/16 inner diameter for 3/4, 1 ton single wheels with clips. The 3/4, 1 ton hubcaps are also thicker, not as flat as their counterpart. 10 1/8" no inner ring for wheels with knubs.

hb32 · 04-30-2010, 07:56 PM

Thanks for the info aerotruck. Looks like I have a measurement of 7 9/16". So, what year wheels with the clips will work for these caps?

**aerotruk63** · 04-30-2010, 08:10 PM

Not to sure of how far up they went. My 62 with 16" wheels had 3 wide clips. They are the rims you see on my 63 that I widened to 9 1/2". The ones I posted above are from the 40's and 50's with 6 skinny clips. They are quite similar to each other but as the years progressed the rims got wider.

ACCORDING TO THE PARTS BOOK

THIS IS A 17.5" RIM THAT IS SIMILAR TO THE 16". The center is not as pronounced on the 16"

lou sassol · 05-03-2010, 05:09 PM

any body know the year for these?

03-09-2010, 08:37 PM	#1
hb32 Registered User Join Date: Feb 2009 Location: Surrey B.C. Canada Posts: 255	64-66 chrome hubcaps I have a lead on some nos chrome 64-66 hubcaps what are they worth?

03-09-2010, 10:41 PM	#2
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: 64-66 chrome hubcaps Chevy Duty has new ones for $52 each, so I'd assume something a lot less than that for good used ones unless they are NOS mint: http://www.classicparts.com/1964-66-...ctinfo/64-029/ I see you mentioned NOS, so at that point it becomes a matter of condition and desire. NOS doesn't always mean perfect. Many NOS items are scratched, dented or have significant "shelf wear". Last edited by markeb01; 03-09-2010 at 10:43 PM.

03-10-2010, 12:23 AM	#3
hb32 Registered User Join Date: Feb 2009 Location: Surrey B.C. Canada Posts: 255	Re: 64-66 chrome hubcaps Have not seen them yet but will post when I get them.

03-10-2010, 01:08 PM	#4
Revoh Registered User Join Date: Nov 2006 Location: Music City, U.S.A. Posts: 638	Re: 64-66 chrome hubcaps I don't know how much those are, but if they were from a '61-'63, they'd be worth like a hundred and seventy-five thousand dollars. __________________ 1963 C-10 My car blog, for your reading pleasure.

03-11-2010, 08:15 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 64-66 chrome hubcaps Figure mint N.O.S. is worth at least double repro. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-25-2010, 04:56 PM	#6
hb32 Registered User Join Date: Feb 2009 Location: Surrey B.C. Canada Posts: 255	Re: 64-66 chrome hubcaps Finally managed to hook up with the seller this morning and got the caps. They appear to be nos, 3 are near perfect. One, bottom right, has some small dents so not perfect but a good 8 out of 10 on it. They have 3839982 I suspect part number on them. Attached Images __________________ Life is too short to drive a boring vehicle. Last edited by 63 & 64 Bowties; 04-27-2010 at 09:01 AM.

04-25-2010, 05:11 PM	#7
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 64-66 chrome hubcaps Do your wheels have clips? That will be a deciding factor pretty quick! __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

04-25-2010, 05:26 PM	#9
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 64-66 chrome hubcaps Have you tried them on yet? Would dress up the truck real nice. Post a picture with them on. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

04-26-2010, 04:12 AM	#10
collins10672 Registered User Join Date: Jan 2009 Location: bean station tennessee Posts: 398	Re: 64-66 chrome hubcaps those hubcaps are very nice,but they will not fit trucks with rims that have the 3 bumps around where the hubcap pops on.they look to me like 3/4 ton hubcaps.they will fit rims with the clips on them,but not the 1/2 ton style.also being chrome and 3/4 ton style these would be very very rare.nice find.

04-26-2010, 04:51 AM	#12
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: 64-66 chrome hubcaps The only chrome dog dish hub caps being reproduced are for the wheels with the bumps, not the clips, so you have a rare set, indeed. The 1/2 ton and 3/4 ton wheels were available with the bumps and with the clips. The diameter of the cap will determine if your caps fit 1/2 ton wheels with clips or 3/4 ton wheels with clips. If your wheels do not have clips, these caps will not fit.

04-26-2010, 11:32 AM	#14
dracko Registered User Join Date: Jan 2010 Location: Regina, SK Posts: 808	Re: 64-66 chrome hubcaps Edited by Moderator Last edited by 63 & 64 Bowties; 04-27-2010 at 09:02 AM.

04-26-2010, 07:45 PM	#15
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 64-66 chrome hubcaps I have 4 old 16" rims with clips but out where you are, there should be some around. Shipping is hell these days. KMS Tools might take them in trade! Actually the two black rims under the white one comes from their store in Burnaby. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

04-27-2010, 03:04 AM	#16
62 Longbed Senior Member Join Date: Nov 2008 Location: Gresham , Oregon Posts: 588	Re: 64-66 chrome hubcaps Here is a picture of my 66 with the hubcaps on .. My wheels are 16.5 , I have the clips .. Love the look on my 3/4 ton ... I've been thinking of getting another set .. Paid $85.00 for all (4) .. have a line on 2-more . Attached Images Last edited by 63 & 64 Bowties; 04-27-2010 at 09:04 AM.

04-27-2010, 03:28 PM	#18
62 Longbed Senior Member Join Date: Nov 2008 Location: Gresham , Oregon Posts: 588	Re: 64-66 chrome hubcaps No, don't get me wrong ... I was refering to what I paid for mine and not trying to low ball you or make it sound like you didn't do well .. Mine also aren't NOS .. But still a very nice set you have .. Last edited by 62 Longbed; 04-27-2010 at 03:28 PM.

04-27-2010, 05:29 PM	#20
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: 64-66 chrome hubcaps those are also 64-65, the 66's have a ridge around the + shape of the hubcap. the story is(I found on a thread here somewhere) is that the ridge helped keep the cap from denting when you pushed it on to the wheel. the repop cap is the stronger one with the ridge. Attached Images __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955 Last edited by jonzcustomshop; 04-27-2010 at 05:32 PM. Reason: added a pic



Register or Log In To remove these advertisements.

04-30-2010, 06:28 PM	#22
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 64-66 chrome hubcaps 7 9/16 inner diameter fits 15" AND 16" wheels for 1/2 ton with clips. 8 13/16 inner diameter for 3/4, 1 ton single wheels with clips. The 3/4, 1 ton hubcaps are also thicker, not as flat as their counterpart. 10 1/8" no inner ring for wheels with knubs. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 04-30-2010 at 06:32 PM.

04-30-2010, 07:56 PM	#23
hb32 Registered User Join Date: Feb 2009 Location: Surrey B.C. Canada Posts: 255	Re: 64-66 chrome hubcaps Thanks for the info aerotruck. Looks like I have a measurement of 7 9/16". So, what year wheels with the clips will work for these caps? __________________ Life is too short to drive a boring vehicle.

04-30-2010, 08:10 PM	#24
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 64-66 chrome hubcaps Not to sure of how far up they went. My 62 with 16" wheels had 3 wide clips. They are the rims you see on my 63 that I widened to 9 1/2". The ones I posted above are from the 40's and 50's with 6 skinny clips. They are quite similar to each other but as the years progressed the rims got wider. ACCORDING TO THE PARTS BOOK THIS IS A 17.5" RIM THAT IS SIMILAR TO THE 16". The center is not as pronounced on the 16" __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 04-30-2010 at 08:44 PM.

05-03-2010, 05:09 PM	#25
lou sassol Registered User Join Date: Jul 2009 Location: portland oregon Posts: 1	Re: 64-66 chrome hubcaps any body know the year for these?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.