OR Blazer Frame Sections

[drunkbus]

I have a 72 4x4 Blazer frame that is going to the scrap yard. Does anyone need any crossmembers or sections of frame before it goes?

[JimmyFloyd]

mounts? I could use some to make a dolly with. Rear frame rails if not cut?

[72gmcshorty]

if the front horns are the same as 2wd i could use the first 8" of both sides...

[drunkbus]

Originally Posted by 72gmcshorty

if the front horns are the same as 2wd i could use the first 8" of both sides...

I'm not sure if they are the same as 2wd, I would guess they are but you might want to make sure. I would do $30 shipped if you do want them.

[gm71jimmy]

Originally Posted by drunkbus

I'm not sure if they are the same as 2wd, I would guess they are but you might want to make sure. I would do $30 shipped if you do want them.

Hi drunkbus... Do you still have the front frame horns? If you do i will take them for the $30 shipped to Overton Nv 89040. Can paypal you the money
Please let me know. classichotrod@msn.com
Thanks

[72gmcshorty]

i will have to pass on the front horns

[drunkbus]

Originally Posted by gm71jimmy

Hi drunkbus... Do you still have the front frame horns? If you do i will take them for the $30 shipped to Overton Nv 89040. Can paypal you the money
Please let me know. classichotrod@msn.com
Thanks

After looking at them closer, one of the front frame horns was cracked so I wasn't careful when I removed the front spring hangers and they are now trashed in that area. If you only need about the front 6-8" and don't mind welding up the crack they would be fine.

[drunkbus]

Originally Posted by JimmyFloyd

mounts? I could use some to make a dolly with. Rear frame rails if not cut?

I do have the mounts cut off, I have them posted in a seperate thread. Rear frame rails are good, How much do you need?

[MT300RUM]

Do you have the rear rails from the crossmember behind the gas tank back? and also that crossmember itself ?
mine is a little tweaked and if it were cheap enough i might just buy yours rather than straightening mine, my zip is 59901

[drunkbus]

Originally Posted by MT300RUM

Do you have the rear rails from the crossmember behind the gas tank back? and also that crossmember itself ?
mine is a little tweaked and if it were cheap enough i might just buy yours rather than straightening mine, my zip is 59901

Right now I still have the whole frame. If I don't hear anything from JimmyFloyd on the rear rails they are yours. I would have to knock the rivets out of the crossmember and break it down to ship it.

[drunkbus]

Originally Posted by MT300RUM

Do you have the rear rails from the crossmember behind the gas tank back? and also that crossmember itself ?
mine is a little tweaked and if it were cheap enough i might just buy yours rather than straightening mine, my zip is 59901

Is this what you are looking for? I would do $65 shipped for the part from the red line back.

[MT300RUM]

Yeah that would be great , Put me in line

[drunkbus]

Originally Posted by MT300RUM

Yeah that would be great , Put me in line

I'll give JimmyFloyd until Sunday afternoon to respond. If he passes or doesn't respond I can ship this stuff out to you on Monday.

[69-72]

In line for the rear crossmember

[drunkbus]

Originally Posted by 69-72

In line for the rear crossmember

MT300RUM is up next for the rear frame rails and crossmember. I'll let you know if he passes.

[drunkbus]

Rear frame rails and crossmember sold.

[sylfred]

in need of a good windshield frame, can you help

[drunkbus]

Originally Posted by sylfred

in need of a good windshield frame, can you help

I have one but I'm keeping it until I know if I'll need it or not. I haven't had my top off yet.