![]() |
|
![]() |
#1 |
Registered User
Join Date: Mar 2010
Location: Vandenberg, CA
Posts: 80
|
possessed wiring
Can't seem to figure what what is going on but when I step on the brake the lights in the instrument panel come on. Also the the rear tail lights do not come on. I looked under the dash and don't see anything spliced or grounded out. The turn signals flash on the dash but that is it as well.
|
![]() |
![]() |
![]() |
#2 |
Resistance is Futile
Join Date: Dec 2006
Location: Mesa,Arizona
Posts: 3,520
|
Re: possessed wiring
I would check the tail lite grounding. This is where I had issues and it will make the whole system do weird stuff, IIRC. I also had the original connectors not make contact with the bulb; they stuck down and did not spring back. Have you messed with the tail lites lately?
__________________
64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2010
Location: Vandenberg, CA
Posts: 80
|
Re: possessed wiring
No. I'll look at the tail lights and start tracing some wires. Hopefully it's an easy fix. still have to go out and find a radiator for it.
|
![]() |
![]() |
![]() |
#4 |
Resistance is Futile
Join Date: Dec 2006
Location: Mesa,Arizona
Posts: 3,520
|
Re: possessed wiring
Oh yeah, just in case you've been under the dash, there is a connector from the dash harness to the tail lite extension harness right near the firewall above the gas pedal. Check and make sure this is plugged in.
Did the tails work before?
__________________
64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device |
![]() |
![]() |
![]() |
#5 |
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: possessed wiring
Problems like this are almost always ground related. When new, these trucks depended on sheetmetal to return the ground side of the circuit to the battery. 45-50 years of crud and corrosion can block that path. Best solution is to run a separate wire to each light bucket and connect those to a common ground. Also make sure the negative side of the battery is connected to both the engine block and the frame, or from the battery cable connection on the engine block to the frame. All those grounds depending on the frame need a way to get back to the battery.
It also helps to clean the light sockets with a battery brush or fine sandpaper, and coat the bulb contacts with dielectric grease. This will keep the contacts corrosion free far longer.
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502 Last edited by markeb01; 04-16-2010 at 01:33 AM. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Mar 2010
Location: Vandenberg, CA
Posts: 80
|
Re: possessed wiring
thanks for the tips. Does anybody have a wiring diagram that I can enlarge. I looked at the ones in the FAQ's but can't really read them.
Ed |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Dec 2009
Location: Hamilton ON
Posts: 17
|
Re: possessed wiring
Check the bulbs also, I have seen where a filament in the bulb drops onto the other filament and then feeds back to the dash when brakes are applied
|
![]() |
![]() |
![]() |
#8 |
Registered User
![]() Join Date: May 2009
Location: Rathdrum, Idaho
Posts: 1,135
|
Re: possessed wiring
http://www.6066gmcguy.org/wire-tips.htm
Check this web site out it's for GMC but applies to Chevy....Vernski ![]() |
![]() |
![]() |
![]() |
#9 | |
Registered User
Join Date: Nov 2008
Location: Houston TX
Posts: 362
|
Re: possessed wiring
Quote:
__________________
The price of cool aint cheap. |
|
![]() |
![]() |
![]() |
#10 |
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: possessed wiring
Here's a webpage posting a bunch of wiring diagrams:
http://www.64moneypit.pages.qpg.com/...ucks/id12.html
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502 |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Aug 2009
Location: Coaldale Alberta
Posts: 174
|
Re: possessed wiring
When i was rewiring my truck at one point it would step on my brake pedall and the the dashlights would flash on an off through the blinker...
![]() ![]() Most of my issues ended up being that my high/low beam floor switch..that looked fine untill i attempted to take it appart and it crumbled into a pile of rusty insides...was somehow running stuff backwards or something...It still doesnt add up to me but...everything worked after that. GO FIGURE! (I HATE WIRING) Jory
__________________
63 C10 long bed Work in progress 16 F350 Blk Platinum Work Truck 15 Yukon Denali Kid Hauler ![]() ![]() Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=359535 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|