The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-07-2010, 10:27 AM   #1
az65
Registered User
 
az65's Avatar
 
Join Date: May 2010
Location: Casa Grande, AZ
Posts: 46
new member... intro

Hi all, great site here, every time I searched for 60-66 info it brought me here. Figured I may as well register instead of being a perpetual lurker.

Anyways, I picked up my '65 several months ago on a trade for a fox body Mustang I had. 60-66 and 67-72 Chevy trucks have always been a favorite, I learned how to drive a stick shift on my dad's old '62 way back when. The truck didn't run when I got it so I put a new carb, HEI (still had points) and the 3 on the tree was wasted (linkage) so I converted it to floor shift. It's pretty clean for a 45 year old vehicle and gets far more compliments than my SRT10 haha

She has a 327/3spd manual, here's some crappy blackberry pics I took a few months back:





this one is from last weekend parked next to my best friend's clean old Ford:


I would like to "de-stinkbug" it by lowering it or at least leveling it. I would love to convert to front disc brakes eventually, but would settle for power assist and a two reservoir master cylinder for starters. I want to add some 6 lug rally wheels and swap out the 3 speed for a muncie 4 speed. I killed the rear-end on the way to work on Tuesday so I'm looking for a drum to drum rear end for it to simplify the swap. The only fluid level I didn't check after acquiring it was the rear-diff. Doh! The interior is in great shape for its age so I'll probably leave it alone. That's about it for now, great site!

Last edited by az65; 05-07-2010 at 10:38 AM.
az65 is offline   Reply With Quote
Old 05-07-2010, 10:54 AM   #2
markeb01
Senior Enthusiast
 
markeb01's Avatar
 
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
Re: new member... intro

Welcome to the forum. Nice looking truck. I frequent all the 60-66 sites on the web, and time will show this one offers the most, and provides a lot of friendly support.
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502
markeb01 is offline   Reply With Quote
Old 05-07-2010, 12:17 PM   #3
Vernski
Registered User
 
Join Date: May 2009
Location: Rathdrum, Idaho
Posts: 1,135
Re: new member... intro

Welcome from north Idaho to the forums, be careful parking that close to a Ferd that can cause rust spots. Your truck looks nice & straight to start with that makes things allot easier with a resto. Enjoy....Vernski
Vernski is offline   Reply With Quote
Old 05-07-2010, 02:00 PM   #4
Muleman100
Registered User
 
Muleman100's Avatar
 
Join Date: Nov 2008
Location: Crosby, Texas
Posts: 377
Re: new member... intro

Welcome from SE Texas. You will find a world of good info and great people on this forum.
__________________
" I never think of the future. It comes soon enough " - Albert Einstein
Muleman100 is offline   Reply With Quote
Old 05-07-2010, 02:45 PM   #5
az65
Registered User
 
az65's Avatar
 
Join Date: May 2010
Location: Casa Grande, AZ
Posts: 46
Re: new member... intro

Thanks everyone!

My truck has more rust than the ford, btw. They are both AZ originals but mine has rust in the doors, and fenders like all these trucks do around here. At least the floors are solid!! My dad's old '62 came from the rust belt and it was interesting seeing the road beneath us. haha I can repair the rust on mine with just the little patch panels they sell at LMC. Someone bondo'd over the rust and painted it so it isn't terribly evident now and I'm in no hurry to do anything aesthetic to it. I want to work all the bugs out from being neglected for many years, upgrade the brakes, then I may start worrying about the rust, bodywork, and paint. Some of my favorite trucks that I've seen on here have that nice patina so I may just leave it

Looks like I'm gonna have to drive to Show Low this weekend to pick up a couple rear-ends. One has a 3.40 ratio and the other has a 4.10. They are complete and only 100 dollars for both. It will probably cost me another 100 in gas since my running truck gets 10mpg at best. I may be able to sell one to recoup my losses.

Last edited by az65; 05-07-2010 at 02:46 PM.
az65 is offline   Reply With Quote
Old 05-07-2010, 04:27 PM   #6
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
Re: new member... intro

Welcome to the forum

Nice looking truck.....
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 05-07-2010, 04:48 PM   #7
Bazooka
Keepin it old school
 
Bazooka's Avatar
 
Join Date: Jul 2008
Location: Ca
Posts: 672
Re: new member... intro

Welcome to the forum. I have been to Arizona City a couple times. I have family in AZ around the Casa Grande and Phoenix area. Goodluck with your project

Last edited by Bazooka; 05-07-2010 at 04:48 PM.
Bazooka is offline   Reply With Quote
Old 05-07-2010, 04:51 PM   #8
az65
Registered User
 
az65's Avatar
 
Join Date: May 2010
Location: Casa Grande, AZ
Posts: 46
Re: new member... intro

Quote:
Originally Posted by Bazooka View Post
Welcome to the forum. I have been to Arizona City a couple times. I have family in AZ around the Casa Grande and Phoenix area. Goodluck with your project
Thanks! I can't believe someone not from Casa Grande or Arizona City even knows where it is. haha Most people even in Phoenix and Tucson have never heard of it. I grew up in Casa Grande, I probably know your family around these parts unless they just moved here recently.

Last edited by az65; 05-07-2010 at 04:53 PM.
az65 is offline   Reply With Quote
Old 05-07-2010, 08:55 PM   #9
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
Re: new member... intro

Nice pic w/your buddies old truck! Nothing wrong w/old Fords just because they're not as pleasing to the eye as old Chevys .
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 05-07-2010, 11:32 PM   #10
198plus
Registered User
 
198plus's Avatar
 
Join Date: May 2009
Location: Loganville, Ga.
Posts: 1,408
Re: new member... intro

Welcome
198plus is offline   Reply With Quote
Old 05-07-2010, 11:41 PM   #11
1999corvette
Registered User
 
1999corvette's Avatar
 
Join Date: Mar 2010
Location: Queen Creek Az
Posts: 61
Re: new member... intro

Welcome, I'm kinda close, over in Queen Creek
1999corvette is offline   Reply With Quote
Old 05-07-2010, 11:48 PM   #12
1999corvette
Registered User
 
1999corvette's Avatar
 
Join Date: Mar 2010
Location: Queen Creek Az
Posts: 61
Re: new member... intro

By the way, I had heard of Arizona City, but never knew where it was, until reading that's where you are, and looked it up on Google maps.
1999corvette is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com