|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-12-2010, 11:49 AM
|
#1 |
|
Senior Member
 Join Date: May 2010
Location: St.Louis
Posts: 635
|
Recommendation for plugs
Can anyone recommend some plugs for a bone stock 350? I need to buy some plugs and wires and I am looking for any good recommendations.
Also is there an easy way to determine on the distrib if its running points, or if it has been upgraded? Thanks! |
|
|
|
05-12-2010, 01:33 PM
|
#2 |
|
Registered User
Join Date: Aug 2008
Location: groton, ct
Posts: 152
|
Re: Recommendation for plugs
I have always run what the service manual calls for in my case (283) its ac delco R45's. As far at the dist, pull the cap and rotor, you should either see a set of points or an elctronic upgrade in there. Should be very easy to check out
__________________
Erik 1967 K10 SWB Big Window - Bone Stock 1955 JEEP CJ5 13K orig miles (Resto waiting patiently in the garage) |
|
|
|
|
05-12-2010, 09:47 PM
|
#3 |
|
Cops, ha, catch me if you can!
Join Date: Jun 2009
Location: Santa Barbara, CA.
Posts: 271
|
Re: Recommendation for plugs
I used AC Delco on my 350, sorry I don't have a part number on me right now. If you have an HEI you will want to gap them at 45 otherwise you'll gap them at 35.
__________________
72 C-10 Stepper 350/TH350 3.73 in the back Edelbrock intake and Carb Hooker Comp Headers 275/60R15 on Rallies  
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
