CA Parting out 69 Chevy long bed step side - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 07-23-2010, 01:27 AM

EDIT: THIS TRUCK IS LONG GONE, BUT I HAVE A BUNCH OF PARTS. I picked up this truck for the rear fenders (future dually project) The truck is in bad shape and is missing the fenders, hood, grille, and front bumper. The cab is rusty and the bed and tailgate are beat. It has a 010 (4 bolt main 350) motor that runs but should be freshened up and a turbo 400 trans in unknown cond. Not a lot of parts here. Please respond in thread to avoid confusion. Parts are for sale local also. Thanks, Ray
350 engine- $350 if compression numbers are good local
turbo 400- $100 local
exhaust manifolds- $50 pair plus shipping
auto steering column- $40 plus shipping SOLD
AT crossmember- $20 plus shipping
door panels-$25 pair plus shipping SOLD
arm rests- $15 pair plus shipping SOLD
seat... foam good, cover bad- $50 local
visors- $25 pair plus shipping
AM radio- $20 plus shipping SOLD
2 barrel carb- $32 shipped
air cleaner- $20 plus shipping

hddavis · 07-23-2010, 02:48 AM

I need the rod from brake pedal to booster. how much? zip# 65742

**Ricks1971** · 07-23-2010, 08:25 AM

Ray, how are the bed sides?

KrazyRay · 07-23-2010, 10:18 AM

Quote:

Originally Posted by Ricks1971

Ray, how are the bed sides?

Rick, The bed sides are in poor shape. They are rusted at the floor, welded on at front panel, and beat at the tailgate. Thanks, Ray

KrazyRay · 07-23-2010, 10:14 AM

Quote:

Originally Posted by hddavis

I need the rod from brake pedal to booster. how much? zip# 65742

The booster rod is $16 shipped.
Thanks, Ray

hddavis · 07-23-2010, 02:19 PM

if it is the rod from the pedal to the booster i will take it. pm sent

kohler · 07-23-2010, 09:00 PM

you can shoot me a price on just the wheels if they are 16 inch and if u what to sell them my zip is 12401
thanks chris

KrazyRay · 07-23-2010, 10:15 PM

Quote:

Originally Posted by kohler

you can shoot me a price on just the wheels if they are 16 inch and if u what to sell them my zip is 12401
thanks chris

Much to my chagrin, they are 16.5
Thanks, Ray

LandonL · 07-23-2010, 09:19 PM

How many cfm is the carb?

KrazyRay · 07-23-2010, 10:16 PM

Quote:

Originally Posted by LandonL

How many cfm is the carb?

I will check.
Thanks, Ray

LandonL · 07-23-2010, 11:40 PM

Looking for possibly a 390CFM for an Inline 6

KrazyRay · 07-24-2010, 08:07 PM

Quote:

Originally Posted by LandonL

Looking for possibly a 390CFM for an Inline 6

Sorry, its smaller than a 390.

tcb-1 · 07-24-2010, 12:11 AM

what brand of 8 track player is that? if GM, I may be interested.....

KrazyRay · 07-24-2010, 01:41 AM

Quote:

Originally Posted by tcb-1

what brand of 8 track player is that? if GM, I may be interested.....

Sorry, not a GM 8 track.

**D.PASSMORE** · 07-25-2010, 12:39 PM

Intrested just in the door panels. What is the exact condition? Are they metal? Gouged, broken cracked?

Do you still have the grill? Looking for a nice grill support for a 69-70 grill.

LMK, Thanks

KrazyRay · 07-25-2010, 05:20 PM

Quote:

Originally Posted by D.PASSMORE

Intrested just in the door panels. What is the exact condition? Are they metal? Gouged, broken cracked?

Do you still have the grill? Looking for a nice grill support for a 69-70 grill.

LMK, Thanks

David, I will pull the door panels in the next few days and get a super close look at them. The passenger looks very nice, the driver has some surface rust just above the arm rest.
The truck came without a grill and I don't think I have one laying around.
Thanks, Ray

kohler · 07-25-2010, 03:32 PM

ok thanks anyway

**D.PASSMORE** · 07-25-2010, 09:12 PM

Thanks Ray, I can handle a little srface rust. I'll paint them again.

67chevy1series · 07-26-2010, 02:42 AM

does the radio still work is it am fm

ralphie628 · 07-26-2010, 03:23 AM

how much for the power steering brackets.. the brake lines from the booster to to just past the prop valve... the automatic shift linkage from the trans to the steering colum... ship to 91311

ralphie628 · 07-26-2010, 03:25 AM

how is the rear glass? did you test the brakes by any chance?

KrazyRay · 07-26-2010, 10:50 AM

Quote:

Originally Posted by 67chevy1series

does the radio still work is it am fm

The am radio does not work.

Quote:

Originally Posted by ralphie628

how much for the power steering brackets.. the brake lines from the booster to to just past the prop valve... the automatic shift linkage from the trans to the steering colum... ship to 91311

No power steering, the brake lines are shot, I will check the linkage.

Quote:

Originally Posted by ralphie628

how is the rear glass? did you test the brakes by any chance?

I don't ship rear glass, the brakes did not work on this truck.

ralphie628 · 07-26-2010, 11:46 AM

No power steering, the brake lines are shot, I will check the linkage.

I don't ship rear glass, the brakes did not work on this truck.[/QUOTE]

i noticed you had some other trucks you were parting out... any chance that those still the power steering brackets and good brake lines?..

KrazyRay · 07-26-2010, 09:51 PM

Quote:

Originally Posted by ralphie628

No power steering, the brake lines are shot, I will check the linkage.

I don't ship rear glass, the brakes did not work on this truck.

i noticed you had some other trucks you were parting out... any chance that those still the power steering brackets and good brake lines?..[/QUOTE]
I have a 69 GMC coming in Tues. It has no motor, but it may have the brake lines. Just to clarify, you need the short lines between the master and the prop valve? Sadly, I have no power steering brackets. Thanks, Ray

**D.PASSMORE** · 07-28-2010, 07:36 AM

Looks good enough for what I need them for. Do you have the mounting screws? Can you shoot me a total with shipping? 32084. Thanks DP

07-23-2010, 01:27 AM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting out 69 Chevy long bed step side EDIT: THIS TRUCK IS LONG GONE, BUT I HAVE A BUNCH OF PARTS. I picked up this truck for the rear fenders (future dually project) The truck is in bad shape and is missing the fenders, hood, grille, and front bumper. The cab is rusty and the bed and tailgate are beat. It has a 010 (4 bolt main 350) motor that runs but should be freshened up and a turbo 400 trans in unknown cond. Not a lot of parts here. Please respond in thread to avoid confusion. Parts are for sale local also. Thanks, Ray 350 engine- $350 if compression numbers are good local turbo 400- $100 local exhaust manifolds- $50 pair plus shipping auto steering column- $40 plus shipping SOLD AT crossmember- $20 plus shipping door panels-$25 pair plus shipping SOLD arm rests- $15 pair plus shipping SOLD seat... foam good, cover bad- $50 local visors- $25 pair plus shipping AM radio- $20 plus shipping SOLD 2 barrel carb- $32 shipped air cleaner- $20 plus shipping Attached Images Last edited by KrazyRay; 08-05-2011 at 02:00 AM.

07-23-2010, 02:48 AM	#2
hddavis Registered User Join Date: Mar 2010 Location: Rogersville, MO Posts: 33	Re: Parting out 69 Chevy long bed step side I need the rod from brake pedal to booster. how much? zip# 65742

07-23-2010, 08:25 AM	#3
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: Parting out 69 Chevy long bed step side Ray, how are the bed sides?

07-23-2010, 02:19 PM	#6
hddavis Registered User Join Date: Mar 2010 Location: Rogersville, MO Posts: 33	Re: Parting out 69 Chevy long bed step side if it is the rod from the pedal to the booster i will take it. pm sent

07-23-2010, 09:00 PM	#7
kohler Registered User Join Date: Jan 2006 Location: new york,ulster Posts: 63	Re: Parting out 69 Chevy long bed step side you can shoot me a price on just the wheels if they are 16 inch and if u what to sell them my zip is 12401 thanks chris

07-23-2010, 09:19 PM	#9
LandonL Registered User Join Date: Nov 2009 Location: Georgia Posts: 440	Re: Parting out 69 Chevy long bed step side How many cfm is the carb? __________________ ---\| 1967 GMC Stepside \|-- 250 L6 .030 over ---\| 1985 Porsche 944/1 \|--- Build Thread: '67 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=378640

07-23-2010, 11:40 PM	#11
LandonL Registered User Join Date: Nov 2009 Location: Georgia Posts: 440	Re: Parting out 69 Chevy long bed step side Looking for possibly a 390CFM for an Inline 6 __________________ ---\| 1967 GMC Stepside \|-- 250 L6 .030 over ---\| 1985 Porsche 944/1 \|--- Build Thread: '67 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=378640

07-24-2010, 12:11 AM	#13
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Parting out 69 Chevy long bed step side what brand of 8 track player is that? if GM, I may be interested..... __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

07-25-2010, 12:39 PM	#15
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Parting out 69 Chevy long bed step side Intrested just in the door panels. What is the exact condition? Are they metal? Gouged, broken cracked? Do you still have the grill? Looking for a nice grill support for a 69-70 grill. LMK, Thanks __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie) Last edited by D.PASSMORE; 07-25-2010 at 04:52 PM.

07-25-2010, 03:32 PM	#17
kohler Registered User Join Date: Jan 2006 Location: new york,ulster Posts: 63	Re: Parting out 69 Chevy long bed step side ok thanks anyway

07-25-2010, 09:12 PM	#18
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Parting out 69 Chevy long bed step side Thanks Ray, I can handle a little srface rust. I'll paint them again.

07-26-2010, 02:42 AM	#19
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Parting out 69 Chevy long bed step side does the radio still work is it am fm

07-26-2010, 03:23 AM	#20
ralphie628 Registered User Join Date: Dec 2009 Location: Chatsworth CA Posts: 243	Re: Parting out 69 Chevy long bed step side how much for the power steering brackets.. the brake lines from the booster to to just past the prop valve... the automatic shift linkage from the trans to the steering colum... ship to 91311

07-26-2010, 03:25 AM	#21
ralphie628 Registered User Join Date: Dec 2009 Location: Chatsworth CA Posts: 243	Re: Parting out 69 Chevy long bed step side how is the rear glass? did you test the brakes by any chance?

07-26-2010, 11:46 AM	#23
ralphie628 Registered User Join Date: Dec 2009 Location: Chatsworth CA Posts: 243	Re: Parting out 69 Chevy long bed step side No power steering, the brake lines are shot, I will check the linkage. I don't ship rear glass, the brakes did not work on this truck.[/QUOTE] i noticed you had some other trucks you were parting out... any chance that those still the power steering brackets and good brake lines?..



Register or Log In To remove these advertisements.

07-28-2010, 07:36 AM	#25
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Parting out 69 Chevy long bed step side Looks good enough for what I need them for. Do you have the mounting screws? Can you shoot me a total with shipping? 32084. Thanks DP __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.