|
|
|
02-24-2003, 08:38 PM
|
#1 |
|
Registered User
Join Date: Sep 2002
Location: long island, new york
Posts: 1,333
|
greeeese?
whats the best way to remove all that thisc gooey garbage on the front suspention.i scraped for like an houre but only made a dent in it. tried oven cleaner but with no luck.i can use a sand blaster at school but i can only bring truck parts not the rolling chassis. so i cant get at it.
__________________
1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door |
|
|
|
02-24-2003, 08:46 PM
|
#2 |
|
Registered User
Join Date: Dec 2002
Location: burlington KY
Posts: 175
|
sand blasting wont work till you get all the grees off, it will stick to it and not realy do anything. I used a gallon bucket with simple green ( because im a simple guy) and a wooden bristle brush i bought in the cleaning isle af a grociery store. it takes some time but gets it done. if you have a presure washer that would work even better. what little I remember from when I was in school we had a nice one on auto shop.
|
|
|
|
|
02-24-2003, 08:55 PM
|
#3 |
|
i love summertime
Join Date: Jul 2002
Location: Kelowna BC
Posts: 4,302
|
wire wheels on an angle grinder work great, you have to get the good strong ones though, about 15-20 bucks..here is a before and after pic of a frame i did with a wire wheel then spray bomb, turned out good for about 30 bucks worth of materials
__________________
1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724 |
|
|
|
|
02-24-2003, 08:56 PM
|
#4 |
|
i love summertime
Join Date: Jul 2002
Location: Kelowna BC
Posts: 4,302
|
that last one was a pic of the frame down to bare metal ( about 12 hours of non stop biatch work) here it is painted up
__________________
1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724 |
|
|
|
|
02-24-2003, 08:58 PM
|
#5 |
|
i love summertime
Join Date: Jul 2002
Location: Kelowna BC
Posts: 4,302
|
what the heck, here is a shot of the frame right after we got it off the deck truck
__________________
1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724 |
|
|
|
|
02-24-2003, 09:02 PM
|
#6 |
|
Registered User
Join Date: Jan 2001
Location: Killingworth, CT. USA
Posts: 3,378
|
Beg, borrow or steal a steam cleaner for a weekend. Maybe you have a rental place nearby? If not a steam cleaner maybe a pressure washer would do. Be sure to dress for the occasion.
__________________
1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03) 1998 S10 short bed 2002 S10 Blazer 1942 Oldsmobile 1958 Massey Harris Pony 1951 Wife Killingworth, Connecticut May those who love us, love us, any of those who do not love us, may God turn their hearts. And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping. A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist. |
|
|
|
|
02-24-2003, 09:06 PM
|
#7 |
|
senior member
Join Date: Feb 2003
Location: fort macleod alberta
Posts: 2,770
|
the first time i did this i went and bought so GUNK engine cleaner dumbest thing i ever did the best thign to buy is OVEN CLEANER spray it on and leave for a half hour or so then spray with a garden hose u dont even need a pressure washer or steam cleaner and will cost you about 10 bucks depending on how much you use. it is alsoa great paint remover
 
__________________
69 GMC bagged |
|
|
|
|
02-24-2003, 09:16 PM
|
#8 |
|
Senior Member
Join Date: Oct 2002
Location: Sierra Vista, AZ
Posts: 489
|
Like so many, I've been there and done that. It takes a combination of all the above. There is no simple solution. I do think that a steam cleaner would work the best though. I have a 2300PSI pressure washer, and it works well when combined with the oven cleaner/simple green/castol or whatever, but not just by itself.
Take your time, you will like the job better than if you hurry.
__________________
Keith 70 CST longbed in progress. Hoping to get it back on the road soon. |
|
|
|
|
02-24-2003, 11:55 PM
|
#9 |
|
senior member
Join Date: Feb 2003
Location: fort macleod alberta
Posts: 2,770
|
buy OFF oven cleaner it works the best u need nothin else try it
__________________
69 GMC bagged |
|
|
|
|
02-25-2003, 12:06 AM
|
#10 |
|
Registered User
Join Date: Feb 2003
Location: Myrtle Creek, Oregon
Posts: 29
|
Do you have an air compressor? If so you can pick up a siphon type blow gun at NAPA and a can of fresh solvent. This will also come in handy for the rest of your project. Un-believeably handy tool during engine assembly.
|
|
|
|
|
02-25-2003, 02:01 AM
|
#11 |
|
Registered User
Join Date: Jan 2003
Location: Cold, Snowy High Level, Alberta Canada Eh
Posts: 394
|
man, get yerself some stuff called brakleen. its expensive, like 5 bucks a bottle, but get a case, spray it on, lieave it like 2 mins, then blast it with a pressure washer. if that doesnt work, then get yerslef a bottle of varsol or paint thinner, and dump it on. then work it in with a wire brush, nad let it sit. then blast it again. i work in a heavy equipment shop, and i have learned the easeiest way to clean oil and road crap off. if the above dont work, well, sucks 2 be u man,. hope i helped dude
__________________
2003 yamaha raptor. Stock, but it still hauls!!!! 2000 skiddo mxz 700. Camoplast 1.5 inch track, jaws twin pipes, b+b can, custom built and weighted clutch, wiseco piston, high comp heads. its very fast. wow. 72 c-10 longbox. Bright Orange. Brand new 350, rv cam, performer intake, qjet, headers, 2 1/2 inch exhaust into hooker areo chamber mufflers. Body work coming soon. "dont let yer mind wander, its to little to go places by itself." "Forget the herse, cause i'll never die"-ACDC Back In Black "If It's To Loud, Yer Just Too Old" "I Love Anything Fast Enough To Do Something Stupid In" "Instant idiot, just add beer!!"" |
|
|
|
|
02-25-2003, 02:07 AM
|
#12 |
|
former desert rat
Join Date: Feb 2003
Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans
Posts: 320
|
Or, you could get a scraper and a torch!!! Now I know Im drinking too much...........
__________________
94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const. |
|
|
|
|
02-27-2003, 02:24 PM
|
#13 |
|
Registered User
Join Date: Sep 2002
Location: Muncie, IN U.S.A.
Posts: 60
|
What! Disturb the anticorrosion system! I'm sure that is supposed to be there--it is on all my chevy's.
In all seriousness, if you use the wire wheels, wear a full face shield, long sleeves, and gloves or you will be picking wires out of your skin. Wire wheels are very useful, but hazardous. I would be careful too of some of the more virulent cleaners. I have a well at my house, and I don't want nasties soaking down into the soil. Soap, pressure, and heat work best for me. OCB |
|
|
|
|
02-27-2003, 05:23 PM
|
#14 |
|
Spank 'em if you got 'em!
Join Date: Nov 2002
Location: Kansas City
Posts: 628
|
Just paint over it like most tranny shop do. If people ask tell them the texture is spray on bed liner for durability!
__________________
Long Knight '71 C-20, 350ci, TH350, Edl. 1406 Carb w/elec.choke, Ignitor ignition, Viper Tires, Orange Dipstick |
|
|
|
|
02-27-2003, 06:54 PM
|
#15 |
|
Registered User
Join Date: Sep 2002
Location: long island, new york
Posts: 1,333
|
lol about the wire wheels i got plenty of those damn things stuck in my arms and legs one evan went almost completly in needed tweasers to get it out. but anyway i need it to get warmer so i can actually do something i have a 25x15 tarp covering the cab and frame along with another tarp covering my perfict bed snow sucks!
__________________
1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
