RI Any 4x4 guys interested in a SRW D60 & a 14bFF w/4.10's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

arkracing · 09-09-2010, 08:45 PM

I have a SRW D60 Front end out of a '79 Chevy. It has factory drive flanges on it instead of hubs, but you should be able to just swap them out for hubs. It isn't some rusty hunk of iron, it was in a running and driving truck. All the brake hardware is there, the calipers were working when removed (but that was about 8 months ago now).

it is 4.10 open.

I have a open 4.10 14bFF rear end out of a '78 Chevy 3/4 ton truck, so the spring perches would have to be moved to fit the '67-'72 chassis. It has the smaller drum brakes on it (not the 13.5" I think they are 11.5" or 12"??)

Located in Coventry, RI

$750 for both

Just trying to clean up some of my junk.

I can get some pictures if interested.

AJs72K5 · 09-09-2010, 08:55 PM

Wow! Bump for a smokin deal for somebody.
Posted via Mobile Device

mosesburb · 09-09-2010, 11:36 PM

I'm interested. PM sent.

**jaros44sr** · 09-10-2010, 06:51 AM

Quote:

Originally Posted by arkracing

I have a SRW D60 Front end out of a '79 Chevy. It has factory drive flanges on it instead of hubs, but you should be able to just swap them out for hubs. It isn't some rusty hunk of iron, it was in a running and driving truck. All the brake hardware is there, the calipers were working when removed (but that was about 8 months ago now).

it is 4.10 open.

I have a open 4.10 14bFF rear end out of a '78 Chevy 3/4 ton truck, so the spring perches would have to be moved to fit the '67-'72 chassis. It has the smaller drum brakes on it (not the 13.5" I think they are 11.5" or 12"??)

Located in Coventry, RI

$750 for both

Just trying to clean up some of my junk.

I can get some pictures if interested.

got pics, imterested

09-09-2010, 08:45 PM	#1
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Any 4x4 guys interested in a SRW D60 & a 14bFF w/4.10's I have a SRW D60 Front end out of a '79 Chevy. It has factory drive flanges on it instead of hubs, but you should be able to just swap them out for hubs. It isn't some rusty hunk of iron, it was in a running and driving truck. All the brake hardware is there, the calipers were working when removed (but that was about 8 months ago now). it is 4.10 open. I have a open 4.10 14bFF rear end out of a '78 Chevy 3/4 ton truck, so the spring perches would have to be moved to fit the '67-'72 chassis. It has the smaller drum brakes on it (not the 13.5" I think they are 11.5" or 12"??) Located in Coventry, RI $750 for both Just trying to clean up some of my junk. I can get some pictures if interested. __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

09-09-2010, 08:55 PM	#2
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Any 4x4 guys interested in a SRW D60 & a 14bFF w/4.10's Wow! Bump for a smokin deal for somebody. Posted via Mobile Device __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

09-09-2010, 11:36 PM	#3
mosesburb I had a V-8 Join Date: May 2003 Location: Phoenix AZ Posts: 1,116	Re: Any 4x4 guys interested in a SRW D60 & a 14bFF w/4.10's I'm interested. PM sent. __________________ 1972 K20 Suburban, 5.9L Cummins, Banks Power Pack, NV4500HD, NP205, H.A.D., D60/14FF ARB Link To Build: HERE.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.