MA Parts N parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GASWAGON · 09-23-2010, 04:13 PM

I'm starting to clear out some space, and thought I would see if anyone could use this stuff. All prices are plus shipping unless stated otherwise. Please respond in the thread and ask any questions. Paypal is prefered. Thanks J

1. Doug's small block headers. These are the nicest headers.They don't leak like the cheapo depot headers. They fit fantastic. They will fit auto or standard. They will not fit a truck with the cast iron bell and built in mounts. ceramic coated, inside and out. 3/8 flanges. No dents they do have some scratches.
replacement cost is almost $600.00. $300 shipped in the lower 48 ( SOLD)

2. Aluminum high flow water pump and billet pulleys. Long style pump that has less than 5K for miles. No issues, clean chrome, billet single groove pulleys. The pump is a flowkooler. Water pump was $140 new and the pulleys where $70.
$100 shipped lower 48 (SOLD)

GASWAGON · 09-23-2010, 04:22 PM

Clean set of 67-72 hood hinges and springs. $30

Driver quality 67-68 grill mouldings, a few dings, $30 pair

New napa small block engine mounts and trans mount. $30 shipped

Small block a/c compressor brackets, one is NOS. I believe they are complete.

$60 shipped

GASWAGON · 09-23-2010, 04:27 PM

A/C brackets

73-87 big block mounts. They where in a 72 I parted. You need to drill a couple of holes. $ 60 shipped

Clean blue sun visors. I think they are aftermarket. $35 shipped

Patsfan34 · 09-23-2010, 04:48 PM

I'd like to put myself first in line for the water pump and pulley. Would like to do a little research first. Could you give me the model # for the water pump? Thanks, Neil

GASWAGON · 09-23-2010, 09:37 PM

Quote:

Originally Posted by Patsfan34

I'd like to put myself first in line for the water pump and pulley. Would like to do a little research first. Could you give me the model # for the water pump? Thanks, Neil

The part # is 1888p

VA72C10 · 09-23-2010, 05:41 PM

i'll take the trim rings...can you give me a price shipped to 23112 please? thanks

gastrader35 · 09-23-2010, 08:49 PM

i would like to be 2nd inline for the pump and pulleys

gastrader35 · 09-23-2010, 08:51 PM

would you have the part # for the headers. wondering if they would fit a 72 4x4

GASWAGON · 09-23-2010, 09:44 PM

Quote:

Originally Posted by gastrader35

would you have the part # for the headers. wondering if they would fit a 72 4x4

The part # is d371y. According to there web site, These will NOT fit your truck. They are for 2wd only. Sorry.

GASWAGON · 09-23-2010, 09:48 PM

Quote:

Originally Posted by gastrader35

i would like to be 2nd inline for the pump and pulleys

If Pats fan passes your next in line. thanks J

gastrader35 · 09-23-2010, 10:23 PM

i will be waiting.thanks

GASWAGON · 09-23-2010, 09:38 PM

Quote:

Originally Posted by VA72C10

i'll take the trim rings...can you give me a price shipped to 23112 please? thanks

I will measure them and get the shipping amount. Thanks J

GASWAGON · 09-24-2010, 04:54 PM

Quote:

Originally Posted by VA72C10

i'll take the trim rings...can you give me a price shipped to 23112 please? thanks

Took them in a box to the ups store and they said $28.00. Let me know, J

GASWAGON · 09-24-2010, 05:56 PM

More parts!

1.Edelbrock performer intake for a small block chevy. Used and dirty. $50 shipped.
2. set of GM center bolt valve covers off a zz-1 crate engine. $25.00 SHIPPED

GASWAGON · 09-24-2010, 10:31 PM

Headers are sold to 67-c10. Thanks Chris!

rich67 · 09-25-2010, 07:28 AM

Quote:

Originally Posted by GASWAGON

Took them in a box to the ups store and they said $28.00. Let me know, J

how long are trim rings ? i think usps will ship up to 70 inches. parcel post mite be cheaper than brown. but i may be confused, it happens to me alot.

GASWAGON · 09-26-2010, 01:29 PM

I still have the intake. $50 shipped
Blue visors $35 shipped
a/c brackets $60 shipped

GobbleStalker · 09-23-2010, 09:08 PM

How do I know if I need a long pump or not? I have a 72 with 350?

ksbrktracer · 09-23-2010, 09:12 PM

Your 72 came with a short water pump if it is still stock , If you going to convert it to long water pump you would have to change all of the pulleys, brackets , move alternator to pass side, lengthen wiring etc.....Lots of work.

GASWAGON · 09-23-2010, 09:47 PM

Quote:

Originally Posted by ksbrktracer

Your 72 came with a short water pump if it is still stock , If you going to convert it to long water pump you would have to change all of the pulleys, brackets , move alternator to pass side, lengthen wiring etc.....Lots of work.

You are incorrect.

GASWAGON · 09-23-2010, 09:45 PM

Quote:

Originally Posted by GobbleStalker

How do I know if I need a long pump or not? I have a 72 with 350?

A stock 72 has a long water pump. If you post a picture I can tell you what you have. Thanks J

Patsfan34 · 09-23-2010, 10:33 PM

Gaswagon I will be dropping a 350 Long block crate motor in my truck and would think this would be a nice addition. Where abouts in MA are you? I'm in CT 06804 but my dad and bro live in Swansea, MA 02777. Maybe I or one of them could meet you to save me the shipping. If it's a pain then shipping would be to a business 06615.

Thanks, Neil

gastrader35 · 09-23-2010, 10:51 PM

what is the outlet size on the collectors.

67-C10 · 09-23-2010, 11:52 PM

If you want to do $250 on the headers I can pick them up i'm in Taunton. If i'm not mistaking your up near Worcester? And if Patsfan goes through i could pick up his stuff too and drop in swansea no problem as it's the next town over.

GASWAGON · 09-24-2010, 08:19 AM

[QUOTE=67-C10;4206845]If you want to do $250 on the headers I can pick them up i'm in Taunton. If i'm not mistaking your up near Worcester? And if Patsfan goes through i could pick up his stuff too and drop in swansea no problem as it's the next town over.[/QUOTE

I"ll take the $250.That would be great if you can help Patsfan as well. I'm in Sutton, just South of Worcester. I will PM you my contact info. Thanks Jason

09-23-2010, 04:13 PM	#1
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Parts N parts I'm starting to clear out some space, and thought I would see if anyone could use this stuff. All prices are plus shipping unless stated otherwise. Please respond in the thread and ask any questions. Paypal is prefered. Thanks J 1. Doug's small block headers. These are the nicest headers.They don't leak like the cheapo depot headers. They fit fantastic. They will fit auto or standard. They will not fit a truck with the cast iron bell and built in mounts. ceramic coated, inside and out. 3/8 flanges. No dents they do have some scratches. replacement cost is almost $600.00. $300 shipped in the lower 48 ( SOLD) 2. Aluminum high flow water pump and billet pulleys. Long style pump that has less than 5K for miles. No issues, clean chrome, billet single groove pulleys. The pump is a flowkooler. Water pump was $140 new and the pulleys where $70. $100 shipped lower 48 (SOLD) Last edited by GASWAGON; 05-08-2011 at 04:24 PM.

09-23-2010, 04:22 PM	#2
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: Parts N parts Clean set of 67-72 hood hinges and springs. $30 Driver quality 67-68 grill mouldings, a few dings, $30 pair New napa small block engine mounts and trans mount. $30 shipped Small block a/c compressor brackets, one is NOS. I believe they are complete. $60 shipped Last edited by GASWAGON; 05-08-2011 at 04:24 PM.

09-23-2010, 04:27 PM	#3
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: Parts N parts A/C brackets 73-87 big block mounts. They where in a 72 I parted. You need to drill a couple of holes. $ 60 shipped Clean blue sun visors. I think they are aftermarket. $35 shipped Last edited by GASWAGON; 05-08-2011 at 04:24 PM.

09-23-2010, 04:48 PM	#4
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: Parts N parts I'd like to put myself first in line for the water pump and pulley. Would like to do a little research first. Could you give me the model # for the water pump? Thanks, Neil

09-23-2010, 05:41 PM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Parts N parts i'll take the trim rings...can you give me a price shipped to 23112 please? thanks __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-23-2010, 08:49 PM	#7
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: Parts N parts i would like to be 2nd inline for the pump and pulleys

09-23-2010, 08:51 PM	#8
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: Parts N parts would you have the part # for the headers. wondering if they would fit a 72 4x4

09-23-2010, 10:23 PM	#11
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: Parts N parts i will be waiting.thanks

09-24-2010, 05:56 PM	#14
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: Parts N parts More parts! 1.Edelbrock performer intake for a small block chevy. Used and dirty. $50 shipped. 2. set of GM center bolt valve covers off a zz-1 crate engine. $25.00 SHIPPED Last edited by GASWAGON; 05-08-2011 at 04:24 PM.

09-24-2010, 10:31 PM	#15
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: Parts N parts Headers are sold to 67-c10. Thanks Chris!

09-26-2010, 01:29 PM	#17
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: Parts N parts I still have the intake. $50 shipped Blue visors $35 shipped a/c brackets $60 shipped

09-23-2010, 09:08 PM	#18
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Parts N parts How do I know if I need a long pump or not? I have a 72 with 350? __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

09-23-2010, 09:12 PM	#19
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Parts N parts Your 72 came with a short water pump if it is still stock , If you going to convert it to long water pump you would have to change all of the pulleys, brackets , move alternator to pass side, lengthen wiring etc.....Lots of work.

09-23-2010, 10:33 PM	#22
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: Parts N parts Gaswagon I will be dropping a 350 Long block crate motor in my truck and would think this would be a nice addition. Where abouts in MA are you? I'm in CT 06804 but my dad and bro live in Swansea, MA 02777. Maybe I or one of them could meet you to save me the shipping. If it's a pain then shipping would be to a business 06615. Thanks, Neil

09-23-2010, 10:51 PM	#23
gastrader35 HOARDING SPECIALIST Join Date: Sep 2009 Location: SOUTH CHARLESTON OHIO Posts: 124	Re: Parts N parts what is the outlet size on the collectors.



Register or Log In To remove these advertisements.

09-23-2010, 11:52 PM	#24
67-C10 Registered User Join Date: Jul 2008 Location: Taunton, MA Posts: 224	Re: Parts N parts If you want to do $250 on the headers I can pick them up i'm in Taunton. If i'm not mistaking your up near Worcester? And if Patsfan goes through i could pick up his stuff too and drop in swansea no problem as it's the next town over. __________________ 67 C10 2wd Stepside (to be fleetside), Factory AC truck, Big Back Window, just got a 6.0/6l90e to jam in it now..... Needed: paint and lots of it. and i'm sure lots more misc. parts. Project 67 short step Build Thread 01 Sierra Crew 6.0 2015 Ford F150 Work gave me truck i really wouldn't buy a ford.

09-24-2010, 08:19 AM	#25
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: Parts N parts [QUOTE=67-C10;4206845]If you want to do $250 on the headers I can pick them up i'm in Taunton. If i'm not mistaking your up near Worcester? And if Patsfan goes through i could pick up his stuff too and drop in swansea no problem as it's the next town over.[/QUOTE I"ll take the $250.That would be great if you can help Patsfan as well. I'm in Sutton, just South of Worcester. I will PM you my contact info. Thanks Jason

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.