Pushbars or brush guards for 67-72 trucks? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

longhorn396 · 10-05-2010, 10:09 AM

Did they make them?? i know they have the bumpers with two small pushers on em but do they make actual pushbars or brush guards? sorry for the poor wording lol idk how else to say it

Shaky · 10-05-2010, 04:14 PM

Here's an aftermarket piece that the original owner must have put on. My brother had a push bar like you see on cop cars on his '68.

BLAZERMAN · 10-06-2010, 12:17 AM

Quote:

Originally Posted by Shaky

Here's an aftermarket piece that the original owner must have put on. My brother had a push bar like you see on cop cars on his '68.

Actually the brush guard Shaky has on his truck is a factory GM piece that could be ordered through the Chevy Accessory catalog and dealer installed or installed by the owner. Here is a popular aftermarket brush guard from the same era.

Shaky · 10-06-2010, 06:15 AM

Quote:

Originally Posted by BLAZERMAN

Actually the brush guard Shaky has on his truck is a factory GM piece that could be ordered through the Chevy Accessory catalog and dealer installed or installed by the owner.

I did not know that. You learn something new everyday.

rogergodding · 11-01-2010, 03:30 PM

Quote:

Originally Posted by BLAZERMAN

Actually the brush guard Shaky has on his truck is a factory GM piece that could be ordered through the Chevy Accessory catalog and dealer installed or installed by the owner. Here is a popular aftermarket brush guard from the same era.

My son's truck has the exact same one. It will be coming off soon....

longhorn396 · 10-06-2010, 08:12 AM

Wow those are cool. is there anywhere i could find one? oh yea Shaky that wat kind of bars im talking about like on cop cars. to support on the sides and a bar in the middle.thats what i want

**72K20** · 10-06-2010, 12:46 PM

Check out board member "bignbad". His truck avatar has what I believe you are talking about. I also have one but yet to be installed. I can grab a picture of it for you if that would help.

longhorn396 · 10-07-2010, 09:04 AM

bignbads are exactly what im talkin about. i sent him a pm to see where i could find a set at

**72K20** · 10-07-2010, 09:51 AM

I was thinking that is what you were after, as that is exactly what I wanted as well. After searching and posting "Wanted To Buy" on this site, I fianlly found mine at a swap meet.

longhorn396 · 10-07-2010, 10:05 AM

How much did u give for em??

**72K20** · 10-07-2010, 10:13 AM

I gave the guy $30. He did not have any hardware, just the pushbar. But a quick run to Tractor Supply for some Grade 8 bolts and we're good to go, as soon as I repaint it.

longhorn396 · 10-07-2010, 10:20 AM

Man thats cheap. Hey keep an eye out for me if u find another that cheap shoot me a pm. Where do they mount at on the frame or what??

longhorn396 · 10-12-2010, 10:20 AM

The one i am looking for is called a bull bar i just found out but i cant find where to buy
one. Help would be appreciated and will it even work on my truck??

longhorn396 · 11-01-2010, 09:56 AM

There also called cattle bars. i still havent found any

*stich626* · 11-01-2010, 10:08 AM

I have one that is a centered bar(two) that has two uprights and then 2 3"tubes that go across (that you'd mount lights on)
it's for a 73-87
will it bolt onto a 67-72
I'm guess'n not.. but if the frame rails are the same width. it woek wit some fab'n..
anyone have any idea..
my 88 ford looked killer with it.
the first post with pic is the same bar thats on a wrecker a mile from me

longhorn396 · 11-01-2010, 10:14 AM

U mean u have one for sale or u have one on ur truck?? the one ur talking about is the kind i want lol.

*stich626* · 11-01-2010, 10:23 AM

Quote:

Originally Posted by longhorn396

U mean u have one for sale or u have one on ur truck?? the one ur talking about is the kind i want lol.

sorry not for sale..
I'll look on the box to get whom made it..
I want to say grizzly

longhorn396 · 11-01-2010, 10:24 AM

Yea thanks man tell me when u find out

lofly'a · 11-01-2010, 11:27 AM

i have one of the factory ones on my 72, i never knew they were factory pieces. i assumed that they were local like many rear bumpers that had the dealers name and city/state stamped in them, as they were very common in the late 60's to mid seventies.

longhorn396 · 11-01-2010, 03:04 PM

i love the looks of the bull bars they make the truck look bulletproof or something they look awesome
Posted via Mobile Device

**special-K** · 11-02-2010, 05:46 AM

Here are some aftermarket brush guards made for these trucks:

swamp rat · 11-03-2010, 02:05 AM

Quote:

Originally Posted by special-K

Here are some aftermarket brush guards made for these trucks:

I'd love to get my hands on one of tho's guards! But i'd settle for a side shot of one if possible that shows the mount tab detail. I'd like to make something like it for my spare tire carrier.

*stich626* · 11-03-2010, 07:51 AM

Quote:

Originally Posted by swamp rat

I'd love to get my hands on one of tho's guards! But i'd settle for a side shot of one if possible that shows the mount tab detail. I'd like to make something like it for my spare tire carrier.

I'll see if I can dig mine out on the w end..
the sides unbolt from the cross bars..
and I can trace the shape of the side uprights.
and just mail it to you..(the trace not the bar)

longhorn396 · 11-05-2010, 06:25 PM

Quote:

Originally Posted by swamp rat

I'd love to get my hands on one of tho's guards! But i'd settle for a side shot of one if possible that shows the mount tab detail. I'd like to make something like it for my spare tire carrier.

Would u happen to know what brand these are swamp rat?

swamp rat · 11-05-2010, 08:16 PM

No, wish i did but ether way i'm sure there out of production..

10-05-2010, 10:09 AM	#1
longhorn396 S.D.M.F. Join Date: Jan 2007 Location: Westport, In Posts: 639	Pushbars or brush guards for 67-72 trucks? Did they make them?? i know they have the bumpers with two small pushers on em but do they make actual pushbars or brush guards? sorry for the poor wording lol idk how else to say it __________________ 1969 Chevy Longhorn 396/400 3/4 ton. 1991 Chevy Camaro RS 305/700r4 1978 Honda XL175 and XL350(the evil twin) 2006 Kawasaki ZX-14r drag bike-best e.t. 9.4@145 mph without nitrous 1971 BSA Thunderbolt 650cc

10-05-2010, 04:14 PM	#2
Shaky Six in a row makes it go... Join Date: Mar 2009 Location: Vacationland: Maine Posts: 1,346	Re: Pushbars or brush guards for 67-72 trucks? Here's an aftermarket piece that the original owner must have put on. My brother had a push bar like you see on cop cars on his '68. Attached Images __________________ 67 C20 long step resto: http://67-72chevytrucks.com/vboard/s...d.php?t=342086 66 C10 long step build: http://67-72chevytrucks.com/vboard/s...=1#post3814790 CT to Alaska in a 67 C10: http://67-72chevytrucks.com/vboard/s...d.php?t=399224 “The height of sophistication is simplicity." - Clare Boothe Luce

10-06-2010, 08:12 AM	#6
longhorn396 S.D.M.F. Join Date: Jan 2007 Location: Westport, In Posts: 639	Re: Pushbars or brush guards for 67-72 trucks? Wow those are cool. is there anywhere i could find one? oh yea Shaky that wat kind of bars im talking about like on cop cars. to support on the sides and a bar in the middle.thats what i want __________________ 1969 Chevy Longhorn 396/400 3/4 ton. 1991 Chevy Camaro RS 305/700r4 1978 Honda XL175 and XL350(the evil twin) 2006 Kawasaki ZX-14r drag bike-best e.t. 9.4@145 mph without nitrous 1971 BSA Thunderbolt 650cc Last edited by longhorn396; 10-06-2010 at 08:13 AM.

10-06-2010, 12:46 PM	#7
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: Pushbars or brush guards for 67-72 trucks? Check out board member "bignbad". His truck avatar has what I believe you are talking about. I also have one but yet to be installed. I can grab a picture of it for you if that would help.

10-07-2010, 09:04 AM	#8
longhorn396 S.D.M.F. Join Date: Jan 2007 Location: Westport, In Posts: 639	Re: Pushbars or brush guards for 67-72 trucks? bignbads are exactly what im talkin about. i sent him a pm to see where i could find a set at __________________ 1969 Chevy Longhorn 396/400 3/4 ton. 1991 Chevy Camaro RS 305/700r4 1978 Honda XL175 and XL350(the evil twin) 2006 Kawasaki ZX-14r drag bike-best e.t. 9.4@145 mph without nitrous 1971 BSA Thunderbolt 650cc

10-07-2010, 09:51 AM	#9
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: Pushbars or brush guards for 67-72 trucks? I was thinking that is what you were after, as that is exactly what I wanted as well. After searching and posting "Wanted To Buy" on this site, I fianlly found mine at a swap meet.

10-07-2010, 10:05 AM	#10
longhorn396 S.D.M.F. Join Date: Jan 2007 Location: Westport, In Posts: 639	Re: Pushbars or brush guards for 67-72 trucks? How much did u give for em?? __________________ 1969 Chevy Longhorn 396/400 3/4 ton. 1991 Chevy Camaro RS 305/700r4 1978 Honda XL175 and XL350(the evil twin) 2006 Kawasaki ZX-14r drag bike-best e.t. 9.4@145 mph without nitrous 1971 BSA Thunderbolt 650cc

10-07-2010, 10:13 AM	#11
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: Pushbars or brush guards for 67-72 trucks? I gave the guy $30. He did not have any hardware, just the pushbar. But a quick run to Tractor Supply for some Grade 8 bolts and we're good to go, as soon as I repaint it.

10-07-2010, 10:20 AM	#12
longhorn396 S.D.M.F. Join Date: Jan 2007 Location: Westport, In Posts: 639	Re: Pushbars or brush guards for 67-72 trucks? Man thats cheap. Hey keep an eye out for me if u find another that cheap shoot me a pm. Where do they mount at on the frame or what?? __________________ 1969 Chevy Longhorn 396/400 3/4 ton. 1991 Chevy Camaro RS 305/700r4 1978 Honda XL175 and XL350(the evil twin) 2006 Kawasaki ZX-14r drag bike-best e.t. 9.4@145 mph without nitrous 1971 BSA Thunderbolt 650cc

10-12-2010, 10:20 AM	#13
longhorn396 S.D.M.F. Join Date: Jan 2007 Location: Westport, In Posts: 639	Re: Pushbars or brush guards for 67-72 trucks? The one i am looking for is called a bull bar i just found out but i cant find where to buy one. Help would be appreciated and will it even work on my truck?? __________________ 1969 Chevy Longhorn 396/400 3/4 ton. 1991 Chevy Camaro RS 305/700r4 1978 Honda XL175 and XL350(the evil twin) 2006 Kawasaki ZX-14r drag bike-best e.t. 9.4@145 mph without nitrous 1971 BSA Thunderbolt 650cc Last edited by longhorn396; 10-13-2010 at 08:09 AM.

11-01-2010, 09:56 AM	#14
longhorn396 S.D.M.F. Join Date: Jan 2007 Location: Westport, In Posts: 639	Re: Pushbars or brush guards for 67-72 trucks? There also called cattle bars. i still havent found any __________________ 1969 Chevy Longhorn 396/400 3/4 ton. 1991 Chevy Camaro RS 305/700r4 1978 Honda XL175 and XL350(the evil twin) 2006 Kawasaki ZX-14r drag bike-best e.t. 9.4@145 mph without nitrous 1971 BSA Thunderbolt 650cc Last edited by longhorn396; 11-01-2010 at 09:57 AM.

11-01-2010, 10:08 AM	#15
stich626 Account Suspended Join Date: Sep 2010 Location: hingham ma Posts: 1,721	Re: Pushbars or brush guards for 67-72 trucks? I have one that is a centered bar(two) that has two uprights and then 2 3"tubes that go across (that you'd mount lights on) it's for a 73-87 will it bolt onto a 67-72 I'm guess'n not.. but if the frame rails are the same width. it woek wit some fab'n.. anyone have any idea.. my 88 ford looked killer with it. the first post with pic is the same bar thats on a wrecker a mile from me Last edited by stich626; 11-01-2010 at 10:08 AM.

11-01-2010, 10:14 AM	#16
longhorn396 S.D.M.F. Join Date: Jan 2007 Location: Westport, In Posts: 639	Re: Pushbars or brush guards for 67-72 trucks? U mean u have one for sale or u have one on ur truck?? the one ur talking about is the kind i want lol. __________________ 1969 Chevy Longhorn 396/400 3/4 ton. 1991 Chevy Camaro RS 305/700r4 1978 Honda XL175 and XL350(the evil twin) 2006 Kawasaki ZX-14r drag bike-best e.t. 9.4@145 mph without nitrous 1971 BSA Thunderbolt 650cc

11-01-2010, 10:24 AM	#18
longhorn396 S.D.M.F. Join Date: Jan 2007 Location: Westport, In Posts: 639	Re: Pushbars or brush guards for 67-72 trucks? Yea thanks man tell me when u find out __________________ 1969 Chevy Longhorn 396/400 3/4 ton. 1991 Chevy Camaro RS 305/700r4 1978 Honda XL175 and XL350(the evil twin) 2006 Kawasaki ZX-14r drag bike-best e.t. 9.4@145 mph without nitrous 1971 BSA Thunderbolt 650cc

11-01-2010, 11:27 AM	#19
lofly'a Registered User Join Date: May 2000 Location: Alexandria, LA 71301 Posts: 1,451	Re: Pushbars or brush guards for 67-72 trucks? i have one of the factory ones on my 72, i never knew they were factory pieces. i assumed that they were local like many rear bumpers that had the dealers name and city/state stamped in them, as they were very common in the late 60's to mid seventies. __________________ -02 avalanche (daily driver) -66 gto ragtop 389/400 (garage queen, hand-me-down from dad) -72 Tribute Trans Am (6.0LS/T56 6-speed) in progress -2003 YUKON (Wife's) -71 gmc swb fleet (current project, gonna shave everything, bags, stuff w/ 20's, gen III powertrain) -48 3100 SWB - 12/31/23 LONG TERM Project



Register or Log In To remove these advertisements.

11-01-2010, 03:04 PM	#20
longhorn396 S.D.M.F. Join Date: Jan 2007 Location: Westport, In Posts: 639	Re: Pushbars or brush guards for 67-72 trucks? i love the looks of the bull bars they make the truck look bulletproof or something they look awesome Posted via Mobile Device __________________ 1969 Chevy Longhorn 396/400 3/4 ton. 1991 Chevy Camaro RS 305/700r4 1978 Honda XL175 and XL350(the evil twin) 2006 Kawasaki ZX-14r drag bike-best e.t. 9.4@145 mph without nitrous 1971 BSA Thunderbolt 650cc

11-02-2010, 05:46 AM	#21
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Pushbars or brush guards for 67-72 trucks? Here are some aftermarket brush guards made for these trucks: __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 11-02-2010 at 05:47 AM.

11-05-2010, 08:16 PM	#25
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Pushbars or brush guards for 67-72 trucks? No, wish i did but ether way i'm sure there out of production.. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.