73 C10 PU Dome Light & Fuse Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

embers49 · 10-14-2010, 01:51 AM

I have a 1973 C10 3/4 (Cheyenne) PU.
Can anyone help me out with a few questions about the dome light.
It will not light (by door switches or headlight knob).
I have replaced the bulb and nothing. The bulb socket and housing are in good condition.

Is the dome on its own circuit/fuse and if so which one on the board is it?

Also, anyone know where the wires run for the dome.
If it isn't the fuse I'm guessing the circuit is broken but I don't know where it runs to trace it.
Where does it ground out?
My first guesses are fuse, ground is detached or broken wire but no clue where to look.

Adams74Chevy · 10-14-2010, 12:50 PM

Also check the door switch it could be that. My father's '87 is won't come on any more and he just put a small flashlight in the driverside door pocket if he needs to see in the cab...not a solution in my book but he hardly goes anywhere at night in it anyways.

embers49 · 10-14-2010, 08:49 PM

Looks like the circuit has one hot lead to bulb and 1 return which splits to 3 for all switches. The orange "hot" lead doesnt go anywhere at panel. It just ends at a connector dangling by the fuse panel. So I guess the real question is just.. where does it connect to on the fuse panel?

10-14-2010, 01:51 AM	#1
embers49 Registered User Join Date: Oct 2010 Location: North Coast, CA Posts: 2	73 C10 PU Dome Light & Fuse Question I have a 1973 C10 3/4 (Cheyenne) PU. Can anyone help me out with a few questions about the dome light. It will not light (by door switches or headlight knob). I have replaced the bulb and nothing. The bulb socket and housing are in good condition. Is the dome on its own circuit/fuse and if so which one on the board is it? Also, anyone know where the wires run for the dome. If it isn't the fuse I'm guessing the circuit is broken but I don't know where it runs to trace it. Where does it ground out? My first guesses are fuse, ground is detached or broken wire but no clue where to look.

10-14-2010, 12:50 PM	#2
Adams74Chevy Registered User Join Date: Mar 2009 Location: MD Posts: 417	Re: 73 C10 PU Dome Light & Fuse Question Also check the door switch it could be that. My father's '87 is won't come on any more and he just put a small flashlight in the driverside door pocket if he needs to see in the cab...not a solution in my book but he hardly goes anywhere at night in it anyways. __________________ 2006 Silverado Crew Cab 1500 4x4 5.3L automatic 1986 M1008 CUCV 6.2L Detroit Diesel TH400 4.56 Detroit Locker rear NP208 1973 K20 "Silverado" 350ci, HEI, TH350, NP203 with 2wd conversion, A/C, power windows,tilt wheel, dual tanks. My '73ish K20 thread My 5yo son claims it as his. 1987 V20 Custom Deluxe 350 TH400 NP208 "farm truck" getting parted out. 2016 Nissan Altima grocery getter/commuter Last edited by Adams74Chevy; 10-14-2010 at 12:50 PM. Reason: speelin' counts

10-14-2010, 08:49 PM	#3
embers49 Registered User Join Date: Oct 2010 Location: North Coast, CA Posts: 2	Re: 73 C10 PU Dome Light & Fuse Question Looks like the circuit has one hot lead to bulb and 1 return which splits to 3 for all switches. The orange "hot" lead doesnt go anywhere at panel. It just ends at a connector dangling by the fuse panel. So I guess the real question is just.. where does it connect to on the fuse panel?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.