rear drop - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c10scotty · 03-01-2003, 11:56 PM

ok im sorry if this has been touched on before but i need some advice for a friend. hes got a 69 with coils all the way around. the front end is pretty much like my 80 so i can help him with that. spindles being best, springs being the cheaper....

but the back, i dont know how to work with. is there any other way to lower the rear besides springs without going air?? he just wants some options. hes probably just looking for a mild drop, 2/4 or so. thanks in advance guys

orange72 · 03-02-2003, 01:02 AM

well you can use blocks but the most with blocks is 3" and thats pushing it.

pat · 03-02-2003, 12:31 PM

From what I gather, to get a 4 drop in the rear, get 3" drop coils and 1" blocks. Thats what I plan on doing, Im no expert though.

c10scotty · 03-03-2003, 05:30 PM

anyone else?

crazy longhorn · 03-03-2003, 05:46 PM

with a 15" wheel, a 2 " block is about all you want to go at the rear(if you blow a tire, you will have susp pcs "skating" on the pavement with over 2" block).......there are some pics posted in this section that will show a 2 " block,if you do a search.....

c10crazy · 03-05-2003, 02:09 PM

I though tthey sold 4" rear drop springs at ECE

03-01-2003, 11:56 PM	#1
c10scotty ~THE SILVER BULLET~ Join Date: Oct 2002 Location: WYOMING Posts: 285	rear drop ok im sorry if this has been touched on before but i need some advice for a friend. hes got a 69 with coils all the way around. the front end is pretty much like my 80 so i can help him with that. spindles being best, springs being the cheaper.... but the back, i dont know how to work with. is there any other way to lower the rear besides springs without going air?? he just wants some options. hes probably just looking for a mild drop, 2/4 or so. thanks in advance guys __________________ ~1980 c10 chevy scottsdale~ ~2.5/4 drop 305/th350c~

03-02-2003, 01:02 AM	#2
orange72 Registered User Join Date: Sep 2000 Location: huntington,texas,united states Posts: 399	well you can use blocks but the most with blocks is 3" and thats pushing it. __________________ 1972 chevy long bed. Currently under construction!! Bagged, 383/700r4.

03-02-2003, 12:31 PM	#3
pat Senior Member Join Date: Jul 2002 Location: Lindsay, TX Posts: 1,245	From what I gather, to get a 4 drop in the rear, get 3" drop coils and 1" blocks. Thats what I plan on doing, Im no expert though. __________________ 68 Chevy 383/350 w/shift kit, 380hp/425ft-lbs, 4.5/5 drop, 17" TT2s 64 Cadillac Sedan DeVille

03-03-2003, 05:30 PM	#4
c10scotty ~THE SILVER BULLET~ Join Date: Oct 2002 Location: WYOMING Posts: 285	anyone else? __________________ ~1980 c10 chevy scottsdale~ ~2.5/4 drop 305/th350c~

03-05-2003, 02:09 PM	#6
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	I though tthey sold 4" rear drop springs at ECE __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park!

03-03-2003, 05:46 PM	#5
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	with a 15" wheel, a 2 " block is about all you want to go at the rear(if you blow a tire, you will have susp pcs "skating" on the pavement with over 2" block).......there are some pics posted in this section that will show a 2 " block,if you do a search.....

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.