vacuum brake booster - The 1947 - Present Chevrolet & GMC Truck Message Board Network

steppside69 · 10-30-2010, 10:24 PM

I recently bought a brake booster from a 1983 1/2 ton chevy truck, I recently was looking through the forum and didnt see anything on installing the brake booster. I was wondering if there was any alterations needed to fit a 69 chevy 1/2 ton? I was looking at the booster, Seen that I may have to drill out the top two holes to install properly? Has anyone run into this problem? Let me know what you think, Thanks Eric

brans72 · 11-01-2010, 07:53 PM

Let me try to get you some picture of what I am doing so far but have not yet fully installed and tested it. Brandon

**Captainfab** · 11-02-2010, 12:52 AM

If that booster setup doesn't work out for you, I have an alternative that will work.

http://www.67-72chevytrucks.com/vboa...d.php?t=347484

**robnolimit** · 11-02-2010, 11:39 AM

Mounting is easy, but you will need to drill out the upper two holes. The linkage to the pedal will need to be adjusted, and you will need to drill a hole in the pedal to connect the linkage to. Thats it.

steppside69 · 11-03-2010, 08:24 PM

Brans72 Thanks for the help, hope it works out for you. Look forward to see the pics!

Captainfab I seen your bracket and looks sweet, will go that route if I dont like the stock bracket.

robnolimit I assume that you use the same holes on the bottom of the bracket? I was looking at the pics from other projects but not certain. Thanks Eric

**70C10Toejam** · 11-03-2010, 10:55 PM

Do you have an auto or manual tranny? If you have an auto, the later boosters with the standard bracket will hit the shift linkage and thus needs to be spaced out. This is how I did it:
auto tranny

If you have a manual, then you can mount the bracket to the firewall like this.
manual tranny

steppside69 · 11-04-2010, 08:04 PM

70C10Toejam

Great write up, I have a auto so your pics and step by step instructions

Thanks Eric

**70C10Toejam** · 11-04-2010, 11:30 PM

Thank you. You are too kind. These are the reasons I love this board. Chances are someone somewhere has already done something and they are more than willing to share it. Hope it works for you.

At some point, I want to get one of the boosters that mount to the firewall and built my own bracket for it. But this works for now.

10-30-2010, 10:24 PM	#1
steppside69 Registered User Join Date: Apr 2004 Location: Rossford,Ohio Posts: 291	vacuum brake booster I recently bought a brake booster from a 1983 1/2 ton chevy truck, I recently was looking through the forum and didnt see anything on installing the brake booster. I was wondering if there was any alterations needed to fit a 69 chevy 1/2 ton? I was looking at the booster, Seen that I may have to drill out the top two holes to install properly? Has anyone run into this problem? Let me know what you think, Thanks Eric __________________ 69 chevy stepside (project) 2006 Silverado Z71 Ext. cab 2005 Saturn VUE (wifes dd)

11-01-2010, 07:53 PM	#2
brans72 Registered User Join Date: Dec 2009 Location: Durham,NC Posts: 636	Re: vacuum brake booster Let me try to get you some picture of what I am doing so far but have not yet fully installed and tested it. Brandon

11-02-2010, 12:52 AM	#3
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: vacuum brake booster If that booster setup doesn't work out for you, I have an alternative that will work. http://www.67-72chevytrucks.com/vboa...d.php?t=347484 __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-02-2010, 11:39 AM	#4
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: vacuum brake booster Mounting is easy, but you will need to drill out the upper two holes. The linkage to the pedal will need to be adjusted, and you will need to drill a hole in the pedal to connect the linkage to. Thats it.

11-03-2010, 08:24 PM	#5
steppside69 Registered User Join Date: Apr 2004 Location: Rossford,Ohio Posts: 291	Re: vacuum brake booster Brans72 Thanks for the help, hope it works out for you. Look forward to see the pics! Captainfab I seen your bracket and looks sweet, will go that route if I dont like the stock bracket. robnolimit I assume that you use the same holes on the bottom of the bracket? I was looking at the pics from other projects but not certain. Thanks Eric __________________ 69 chevy stepside (project) 2006 Silverado Z71 Ext. cab 2005 Saturn VUE (wifes dd)

11-03-2010, 10:55 PM	#6
70C10Toejam Hellasick Join Date: Jul 2006 Location: Death Moans, IA Posts: 876	Re: vacuum brake booster Do you have an auto or manual tranny? If you have an auto, the later boosters with the standard bracket will hit the shift linkage and thus needs to be spaced out. This is how I did it: auto tranny If you have a manual, then you can mount the bracket to the firewall like this. manual tranny __________________ I keep two MAGNUMS in my desk. One's a gun, and I keep it loaded. The other's a bottle and it keeps ME loaded. I'm Tracer Bullet. (Calvin and Hobbes) This life was a test. It was only a test. If this had been an actual life, you would have received instructions on where to go and what to do. RED meat is not bad for you...FUZZY BLUE/GREEN MEAT is bad for you!!!!!!!!!!!!! BUILT FORD TOUGH WITH CHEVY STUFF--sticker at Goodguys

11-04-2010, 08:04 PM	#7
steppside69 Registered User Join Date: Apr 2004 Location: Rossford,Ohio Posts: 291	Re: vacuum brake booster 70C10Toejam Great write up, I have a auto so your pics and step by step instructions Thanks Eric __________________ 69 chevy stepside (project) 2006 Silverado Z71 Ext. cab 2005 Saturn VUE (wifes dd)

11-04-2010, 11:30 PM	#8
70C10Toejam Hellasick Join Date: Jul 2006 Location: Death Moans, IA Posts: 876	Re: vacuum brake booster Thank you. You are too kind. These are the reasons I love this board. Chances are someone somewhere has already done something and they are more than willing to share it. Hope it works for you. At some point, I want to get one of the boosters that mount to the firewall and built my own bracket for it. But this works for now. __________________ I keep two MAGNUMS in my desk. One's a gun, and I keep it loaded. The other's a bottle and it keeps ME loaded. I'm Tracer Bullet. (Calvin and Hobbes) This life was a test. It was only a test. If this had been an actual life, you would have received instructions on where to go and what to do. RED meat is not bad for you...FUZZY BLUE/GREEN MEAT is bad for you!!!!!!!!!!!!! BUILT FORD TOUGH WITH CHEVY STUFF--sticker at Goodguys

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.