Project Black out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dash13 · 11-07-2010, 01:47 AM

Ok,
I have been so excited to get to start my 67' C10 build. I picked this truck up a few months ago and now am starting to get to work.
This will not be a cab off restore and will be a slow go but it will be fun and I can't wait for progress

This truck has been neglected for some time and will take lots of little battles to win this war. I am starting with my suspension. I just received my lowering springs and shocks from CPP. I hope to have them installed this week. While I am down there I will be replacing my drum shoes and springs. It has a nasty dive when braking and flat out doesn't want to. I will keep you all posted.

These are a few picks of when the day I picked it up. Sorry for the bad pics it was with my phone.

dash13 · 11-07-2010, 01:52 AM

I had a chance to clean it up a little and get rid of that canopy.

dash13 · 11-07-2010, 01:56 AM

Me taking it for a spin after replacing the valve cover gasket and putting on new spark plugs and wires.

Slick67 · 11-07-2010, 05:25 AM

Sweet. That is a smooth truck as is. I really like the hubcaps, they give it that sled look. GET IT LOWER!!!

dash13 · 11-07-2010, 12:02 PM

Quote:

Originally Posted by Slick67

Sweet. That is a smooth truck as is. I really like the hubcaps, they give it that sled look. GET IT LOWER!!!

The current springs look like they were heated and pancaked by the PO. I can't wait to get my suspension kit on there to actually see and feel the difference. I don't think the 3/4 will be enough but until I get disks up front thats what I got.

dash13 · 11-07-2010, 12:10 PM

Some of my inspiration.

Don't know the owner's of these but well done.

bigguy69 · 11-07-2010, 11:31 AM

i like it!

Gobbles · 11-10-2010, 12:06 PM

That straight six looks so small in such a large engine bay. Very cool truck!

Pop's C-10 · 11-10-2010, 01:54 PM

looks good..add a drop, leave tha caps & tires alone & bolt in a T-5

dash13 · 11-12-2010, 01:01 AM

It is very small the the engine compartment.

dash13 · 11-12-2010, 01:02 AM

What is a T-5? Is this something I should know about? Tell me more

dash13 · 11-14-2010, 12:49 AM

The work began today on the brakes and suspension. I was able to reassemble my new shoes, spring kit and wheel cylinder.
I took my drums in to be turned and found that one had been turned too far and need to be replaced. Gotta love that.

I also planned on starting my pulling off of the springs and shocks. After cleaning off what looked like forty years of build up and a couple trips away from the work to the parts store I didn't get the lower ball joints off to release the springs. Tomorrows a new day hopefully full of more work and less trips to the store.

dash13 · 11-14-2010, 01:00 AM

Here is one of the before's.

11-07-2010, 01:47 AM	#1
dash13 Registered User Join Date: Mar 2008 Location: Beaverton, OR Posts: 94	Project Black out Ok, I have been so excited to get to start my 67' C10 build. I picked this truck up a few months ago and now am starting to get to work. This will not be a cab off restore and will be a slow go but it will be fun and I can't wait for progress This truck has been neglected for some time and will take lots of little battles to win this war. I am starting with my suspension. I just received my lowering springs and shocks from CPP. I hope to have them installed this week. While I am down there I will be replacing my drum shoes and springs. It has a nasty dive when braking and flat out doesn't want to. I will keep you all posted. These are a few picks of when the day I picked it up. Sorry for the bad pics it was with my phone. Attached Images

11-07-2010, 01:52 AM	#2
dash13 Registered User Join Date: Mar 2008 Location: Beaverton, OR Posts: 94	Re: Project Black out I had a chance to clean it up a little and get rid of that canopy. Attached Images

11-07-2010, 01:56 AM	#3
dash13 Registered User Join Date: Mar 2008 Location: Beaverton, OR Posts: 94	Re: Project Black out Me taking it for a spin after replacing the valve cover gasket and putting on new spark plugs and wires. Attached Images

11-07-2010, 05:25 AM	#4
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project Black out Sweet. That is a smooth truck as is. I really like the hubcaps, they give it that sled look. GET IT LOWER!!! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed" Last edited by Slick67; 11-07-2010 at 05:25 AM.

11-07-2010, 12:10 PM	#6
dash13 Registered User Join Date: Mar 2008 Location: Beaverton, OR Posts: 94	Re: Project Black out Some of my inspiration. Don't know the owner's of these but well done. Attached Images

11-07-2010, 11:31 AM	#7
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Project Black out i like it! __________________ members met: redbaron69, billsbowtie,nc67

11-10-2010, 12:06 PM	#8
Gobbles Registered User Join Date: Sep 2010 Location: British Columbia Posts: 484	Re: Project Black out That straight six looks so small in such a large engine bay. Very cool truck! __________________ Trevor "You already said spite"

11-10-2010, 01:54 PM	#9
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: Project Black out looks good..add a drop, leave tha caps & tires alone & bolt in a T-5

11-12-2010, 01:01 AM	#10
dash13 Registered User Join Date: Mar 2008 Location: Beaverton, OR Posts: 94	Re: Project Black out It is very small the the engine compartment.

11-12-2010, 01:02 AM	#11
dash13 Registered User Join Date: Mar 2008 Location: Beaverton, OR Posts: 94	Re: Project Black out What is a T-5? Is this something I should know about? Tell me more

11-14-2010, 12:49 AM	#12
dash13 Registered User Join Date: Mar 2008 Location: Beaverton, OR Posts: 94	Re: Project Black out The work began today on the brakes and suspension. I was able to reassemble my new shoes, spring kit and wheel cylinder. I took my drums in to be turned and found that one had been turned too far and need to be replaced. Gotta love that. I also planned on starting my pulling off of the springs and shocks. After cleaning off what looked like forty years of build up and a couple trips away from the work to the parts store I didn't get the lower ball joints off to release the springs. Tomorrows a new day hopefully full of more work and less trips to the store. Last edited by dash13; 11-14-2010 at 12:51 AM.

11-14-2010, 01:00 AM	#13
dash13 Registered User Join Date: Mar 2008 Location: Beaverton, OR Posts: 94	Re: Project Black out Here is one of the before's. Attached Images Last edited by dash13; 11-14-2010 at 01:01 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.