|
|
|
11-10-2010, 09:35 PM
|
#1 |
|
Registered User
 
Join Date: Feb 2008
Location: Omaha, NE 68144
Posts: 333
|
3.73 Gears
I'm dismantling a NON-Posi rear end & it has a decent looking set of 3.73 gears in it that I don't need. I'm going to toss the housing with carrier & gears unless someone would be interested in the gears with or without the carrier. I'm willing to take them out for $20 + shipping if anyone is interested. Don't have any pictures right now but will snap a few tomorrow if there is interest.
Hoping to scrap this by next weekend at latest so LMK. Face of ring teeth - all the way around: Part # & ends of ring teeth: Pinion - all the way around: I did find this flaw while taking the pictures. Honestly, it looks like it's been that way for years.
__________________
Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery) Last edited by 68C10HotRod; 11-11-2010 at 12:04 PM. Reason: added pics |
|
|
|
11-11-2010, 09:12 AM
|
#2 |
|
Registered User
Join Date: May 2008
Location: Eastern Iowa
Posts: 423
|
Re: 3.73 Gears
shoot some pictures for me please.
__________________
Matt Garage build http://www.garagejournal.com/forum/s...ead.php?t=6784 My slow but sure truck build http://67-72chevytrucks.com/vboard/s...d.php?t=394924  My philosophy on tires is the same as cigarettes. "smoke them if you got them" HAPPILY DIVORCED! |
|
|
|
|
11-11-2010, 10:48 AM
|
#3 |
|
Registered User
 
Join Date: Mar 2008
Location: Kitchener, Ontario
Posts: 487
|
Re: 3.73 Gears
X2. Put me in line. Thanks.
|
|
|
|
|
11-11-2010, 12:07 PM
|
#4 |
|
Registered User
Join Date: Feb 2008
Location: Omaha, NE 68144
Posts: 333
|
Re: 3.73 Gears
Pics are up. Thanks for the interest guys. USPS would probably be cheapest but I'll ship however someone wants it. Going in sequence so Matt is 1st & has 24hrs. 68chevyfuelie is next in line.
__________________
Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery) |
|
|
|
|
11-12-2010, 09:07 AM
|
#5 |
|
Registered User
Join Date: May 2008
Location: Eastern Iowa
Posts: 423
|
Re: 3.73 Gears
I am going to pass. I was not able to get ahold of my drive train guy to ask about the chip that gear.
__________________
Matt Garage build http://www.garagejournal.com/forum/s...ead.php?t=6784 My slow but sure truck build http://67-72chevytrucks.com/vboard/s...d.php?t=394924 My philosophy on tires is the same as cigarettes. "smoke them if you got them" HAPPILY DIVORCED! |
|
|
|
|
11-12-2010, 09:23 AM
|
#6 |
|
Registered User
Join Date: Feb 2008
Location: Omaha, NE 68144
Posts: 333
|
Re: 3.73 Gears
No problem Matt. Share the pic with him if you can. If you do hear anything & want to post it feel free. I won't be offended even if it's bad news for me. Rather know myself because I don't want anyone to have any issues.
__________________
Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery) |
|
|
|
|
11-14-2010, 05:24 PM
|
#7 |
|
Registered User
Join Date: Dec 1999
Location: Mid NE USA
Posts: 2,212
|
Re: 3.73 Gears
Out of a GM 12 bolt? I have a 70 4x4 with a GM 12 bolt if they will work I will take gears carrier and bearings (for part numbers). Thanks
Ron
__________________
Member #111 68 C-10  Daily Driver70  4x4 Project76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson |
|
|
|
|
11-14-2010, 06:49 PM
|
#8 |
|
Registered User
Join Date: Mar 2008
Location: Kitchener, Ontario
Posts: 487
|
Re: 3.73 Gears
I'll pass too, it sounds like someone else wants the whole thing. I'd take the carrier, but the gears, in my opinion, aren't worth doing anything with. Thanks anyway.
|
|
|
|
|
11-14-2010, 10:39 PM
|
#9 | |
|
Registered User
Join Date: Aug 2010
Location: morristown, tn
Posts: 53
|
Re: 3.73 Gears
Quote:
|
|
|
|
|
|
11-15-2010, 02:03 AM
|
#10 | |
|
Registered User
Join Date: Feb 2008
Location: Omaha, NE 68144
Posts: 333
|
Re: 3.73 Gears
Quote:
__________________
Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery) |
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
