|
01-19-2002, 06:29 PM | #1 |
Registered User
Join Date: Sep 2001
Location: CA
Posts: 15
|
couple questions
what are the most common sources of an oil leak? I've got a 77 Blazer and I need to replace the hood. What year of truck/blazer can I take a hood from to replace my current one?
|
01-19-2002, 07:23 PM | #2 |
Got 20's????
Join Date: Oct 2001
Location: Aberdeen SD
Posts: 1,451
|
The hood will interchange from 73-79. Make sure to buy a brace kit so it doesn't kink though. Oil leaks will be common from the valve cover gaskets. Also front and rear main seals. What area is it leaking from?
------------------ 72 Chevy C/10 87 Chevy Silverado 4X4 www.geocities.com/chevylwb/chevylwb.html
__________________
99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road. |
01-19-2002, 08:54 PM | #3 |
Registered User
Join Date: Sep 2001
Location: CA
Posts: 15
|
the leak appears to be coming from the rear of the engine and somewhat on the side. I'll be replacing the valve cover gaskets this week to see if that helps any.
thanks for the hood info. |
01-19-2002, 11:44 PM | #4 |
Oh,you can't buy that new
Join Date: Apr 2000
Location: Pennsville,N.J. 08070, USA
Posts: 2,039
|
73-80 hoods will work , the 79&80 only had that little raised area across the front and all the aftermarket ones have it also. watch the latches though as the inside release type were totally differnt latches. DAVE
------------------ with all the rocks that I turn over I should be finding more than slugs! [This message has been edited by crossy (edited 01-19-2002).]
__________________
"been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. |
01-20-2002, 12:58 PM | #5 |
Registered User
Join Date: Feb 2001
Location: Sturgeon Bay , WI USA
Posts: 375
|
make sure your oil pressure sending unit isn't leaking.
|
01-21-2002, 11:16 PM | #6 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
misfits has a really good point there, the sneders can leak badly!
------------------ A 68 C-10 panel and a 68 dually C-30 dump truck and a couple 71/72 chassis projects. Randy- Lincoln, IL r68c30@hotmail.com http://messenger.msn.com <A HREF="http://communities.msn.com/196772ChevroletCSTsforever " TARGET=_blank>http://communities.msn.com/196772ChevroletCSTsforever </A> |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|