|
11-23-2010, 04:04 PM | #1 |
Registered User
Join Date: Aug 2007
Location: Puyallup, Washington
Posts: 63
|
Glovebox leak
My '70 normally sits on an uphill angle in my driveway, but when I park on the street or a level parking lot, my glovebox fills with water during moderate to heavy rain. It seems to trickle in on the far right hand side. The windshield seal looks to be good. Before I start tearing things apart, where is the most likely source for the leak ?
__________________
1970 C10 LWB with SB 307 & TH350 |
11-23-2010, 05:07 PM | #2 |
White wall terror
Join Date: Feb 2009
Location: Croydon, Pa.
Posts: 152
|
Re: Glovebox leak
My 71 does the same thing so I will be looking forward to reading some replies on this one.
|
11-23-2010, 05:13 PM | #3 |
Registered User
Join Date: Sep 2010
Location: Casselton, North Dakota 58012
Posts: 1,082
|
Re: Glovebox leak
There could be a little hole in the cowl. Mine does that too...Took my cowl off and found little pinholes from rain sitting in there over the years it rusted through. It sux! One of next summers many projects...
|
11-23-2010, 05:17 PM | #4 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Glovebox leak
if the sealant in the raingutters is dried out and cracked and shrunk rain can leak down inside the roof and down the door pillars
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
11-23-2010, 05:21 PM | #5 |
Registered User
Join Date: Mar 2002
Location: woodstock, alabama, usa
Posts: 938
|
Re: Glovebox leak
This is what i suggest, and bear with me, this is gonna be a little long winded of an explanation. there is a seam in the inner cowl right above and behind the glove box. to access this seam you will need to remove the cowl panel. its not a real big deal. there are 2 bolts under the hood and 2 bolts in the upper door jamb area. also about 8 or 10 phillips head screws holding the cowl on. also you will have 2 remove the wiper arms. once you get the cowl off look down in the opening on that side of the inner cowl. you will see a seam that is sealed with old seam sealer. remove as much of the old seam sealer as you can , and reseal. also if you look in the rain gutter on the back of the firewall ( the area where the engine wiring goes up to the top of the firewall.) you will see a seam that runs the whole width of the cab. if you will check for cracks in the sealer and rust holes and seal it up, you will most likely have solved the problem. those 2 seams usually are the culprit of leaks into the glove box. there are other seams that can cause leaks into the cab as well as the windshield itself but these are the most prevalet on glove box leaks.
__________________
i survived cancer and kidney stones, but my kids are killing me. |
11-23-2010, 05:40 PM | #6 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Glovebox leak
Subscribed!!!!
I have also had the dredded glove box lake. it allways depended on if i parked facing in or backing into the driveway, facing in would make the lake in the box. this is probably the root cause of my floor rotting. So far i have resealed the drip rail and also because i beleve my Windshield to have a bad seal, water on the dash, i tryed a bit of silicone around the seal in the upper surface areas of the bottom corner as a temp fix. I have yet to try to reseal the seam Under the cowl but plan to.. But in the mean time i keep the rat under a car cover.
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
11-23-2010, 05:59 PM | #7 |
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,649
|
Re: Glovebox leak
-
I can tell you how it is getting into the glove box. There is a seam on the right side of the glove box liner and the overlap where it is put together is situated so that any water that drips on top of the liner and runs down the side runs right into the glove box...(whew, that was a long one) I put some sealer along that seam so the glove box won't fill up until I can fix the leak permanently. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
11-23-2010, 07:05 PM | #8 |
Cultural Infidel
Join Date: Jan 2007
Location: Clearwater, FL
Posts: 668
|
Re: Glovebox leak
I had the same problem, all of the above is correct. As an added measure, I sprayed the glove box with rattle can bedliner.
__________________
posted via La-Z-Boy -Mark 1972 C-10 Fleetside 350/TH350 PS PB A/C Cab Sadly....Sold 1968 Short Fleet 350/TH400 PS PB Delivered by Fine69 Also sadly Sold! It may be that your whole purpose in life is simply to serve as a warning to others. A man is not complete until he is married -- then he is finished. |
11-23-2010, 10:39 PM | #9 |
Cruzin
Join Date: Dec 2009
Location: on the road
Posts: 2,835
|
Re: Glovebox leak
i might have to look into this myself.......
__________________
Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14
|
11-24-2010, 12:54 AM | #10 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Glovebox leak
But, if it still leaks then the water is passing thru the carpet to the floorboard.. but at least the registration and other stuff is safe huh??
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
11-24-2010, 01:03 AM | #11 | |
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,649
|
Re: Glovebox leak
Quote:
LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 11-24-2010 at 01:04 AM. |
|
11-24-2010, 01:09 AM | #12 | |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Glovebox leak
Quote:
I had a rubber mat and the water would creep under it and the moisture would be trapped there, it was amazing how much damage happened in 10 years.. from then on its allways under cover yet still waiting for rust repair.
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
|
11-24-2010, 02:05 PM | #13 |
Registered User
Join Date: Aug 2007
Location: Puyallup, Washington
Posts: 63
|
Re: Glovebox leak
Wow! I had no idea how common this problem is!
I guess I know what I'm doing this weekend...
__________________
1970 C10 LWB with SB 307 & TH350 Last edited by dadsgreentruck; 11-24-2010 at 02:06 PM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|