Will these wheels work? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Youngbuck7072 · 11-25-2010, 03:53 PM

he wants 75$ fro them, and i was wondering if the bolt pattern would match up, my truck is a 4wd[IMG]

[/IMG]the wheel size is 16.5x9.75

travlinman · 11-25-2010, 04:17 PM

if your truck is 8 lug it shouldnt be a problem

oldblue1968chevy · 11-25-2010, 04:33 PM

sweet wheels!

Youngbuck7072 · 11-25-2010, 04:35 PM

for 75$, definitatley, he said they came off a frod, but should fit. i have no idea

Sinister · 11-25-2010, 05:13 PM

I'd pass on 16.5" wheels. 16.5" tires cost an arm and a leg.

cdowns · 11-25-2010, 05:33 PM

for that price i'd buy them just to have swapmeet stuff to sell weather i had plans on using them or not

Jacfourteen · 11-26-2010, 01:22 AM

Those are some sweet looking old skool wheels.

Maxxd07 · 11-26-2010, 02:16 AM

Nope wont work, but I need the address and name so I know where they are and to whom recieves payment.

Hell of a deal, I would be all over them.

Youngbuck7072 · 11-26-2010, 02:37 AM

maxxd07, u serious, cause the guy has still got them for sale

Maxxd07 · 11-26-2010, 02:47 AM

Naw, just messin with ya. I think its a good deal so grab them babies up! I would love to have some but dont have anything at the moment to put them on. They will fit your truck and the tires to fit are not that bad to find and/or purchase.

Youngbuck7072 · 11-26-2010, 02:53 AM

are you sure? the guy said they came off a ford

rollinhard · 11-26-2010, 05:56 AM

Ya those wheels should work. The bolt pattern for 8 lug wheels didn't change until ford went to the superduty in like 99 or so they went metric. The difference in the older wheels is the centre hole is bigger but unless your using the wheel to max load rating I think its ok
Posted via Mobile Device

Jacfourteen · 11-26-2010, 06:53 AM

I have a set of wheels off of an 92ish f250 and they work fine. The center hole is larger than my hub so they fit sloppy, but are fine when you torque them down. Some say that you may break lugs, but I've had 3600 pounds of gravel loaded in my bed and drove down the freeway and all my lugs are still in place.

**special-K** · 11-26-2010, 09:19 AM

Yes,they will work and they are worth $75 each.16.5s do not cost an arm and a leg.All tires cost an arm and a leg in the past couple tears since so many diameters have become available.16s are a bit less now (used to be the other way around) and 17s are more.The period correct wheels really set these trucks of like none other.Contemporary custom wheels are what cost an arm and a leg.You can buy a whole lotta tire with the money you'll save on these wheels.

tcb-1 · 11-28-2010, 09:20 AM

Quote:

Originally Posted by special-K

16.5s do not cost an arm and a leg.

uh, yes they do.

packers05 · 11-28-2010, 11:27 AM

16.5 tires are less popular so yes they are slightly more and fewer choices but if you choose a popular tread and size they are not that bad of a deal considering how cool those wheels are!! I have a set of 6 lug 15" ones just likem and they look good to me

swamp rat · 11-26-2010, 01:21 PM

Open this link and scroll down to the 8 lug wheel, read it and then go measure your truck, s/b 6.5" i think but don't quote me, then pull a wheel and measure the backspacing, i'm guessing about4" but again don't quote me. now that you have this information go look at the wheels and take a tape measure, check the lugs and backspacing..
http://www.mrt-wheels.com/boltpattern.html

**special-K** · 11-26-2010, 02:20 PM

Back then we never gave backspacing a thought.I never knew what back spacing any of the wheels I ever ran were,never was asked what I needed when buying,nor was asked when selling.They just fit.Things were actually standardized back before the whole wheel/tire thing got so weirded out in recent years.All 8-lug patterns were the same when these wheels were made.

jbclassix · 11-26-2010, 02:37 PM

They will fit. NEVER seen them in the 99+ metric pattern. Only 8X6.5. I have never seen them for less than 200 a set. They are the BEST looking retro aluminum 8 lug IMO.

travlinman · 11-26-2010, 02:40 PM

theres a guy around me thats been trying to sell a set of these in 6 lug for a looong time and he wants 150-200 for a set of 4. for 75 they should already be in the garage.

Youngbuck7072 · 11-26-2010, 03:42 PM

so its official, im getting the wheels on monday for $75, plus $10 for delivery

48stude · 11-26-2010, 04:06 PM

8 lug, chevy, dodge and pre 99 ford, are all 8 on 6.5 bolt pattern

CG · 11-26-2010, 05:45 PM

Those are cool wheels. A few guys on the board are running them on their 4x4's.

PTS · 11-28-2010, 04:21 AM

I love those wheels.

1. Check center bore and make sure it fits. I have seen studs get bent over center bore being off just a lil especially when tire store cranks them with impact.

2. Make sure lugs are correct length and do not bottom out.

Perry
PTS

Youngbuck7072 · 11-28-2010, 12:42 PM

so i went and talked to a couple guys in the tire buisness today that i trust, and they said not to buy them. they have no bead, so if you roll a tire it will go off the rim, and that these rims are really hard to find tires for, at least the kind i want, so, im not going to buy them

11-25-2010, 03:53 PM	#1
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Will these wheels work? he wants 75$ fro them, and i was wondering if the bolt pattern would match up, my truck is a 4wd[IMG][/IMG]the wheel size is 16.5x9.75 __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O) Last edited by Youngbuck7072; 11-25-2010 at 03:53 PM.

11-25-2010, 04:17 PM	#2
travlinman Registered User Join Date: Feb 2009 Location: stockton ca. Posts: 502	Re: Will these wheels work? if your truck is 8 lug it shouldnt be a problem __________________ 94 ls swap silverado 65 Pontiac 78 c30 crew cab dually (parted and gone) 82 c30 crew cab dually ( now building ) 91 r30 crew cab dually (parted and gone) 69 swb-sold 71 lab sold all in progress......__ ..........._______ \|__\__ ..........\|__(O)______(O)] ........................

11-25-2010, 04:33 PM	#3
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Will these wheels work? sweet wheels! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-25-2010, 04:35 PM	#4
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: Will these wheels work? for 75$, definitatley, he said they came off a frod, but should fit. i have no idea __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O)

11-25-2010, 05:13 PM	#5
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Will these wheels work? I'd pass on 16.5" wheels. 16.5" tires cost an arm and a leg. __________________ Beat it to fit, Paint it to match...

11-25-2010, 05:33 PM	#6
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Will these wheels work? for that price i'd buy them just to have swapmeet stuff to sell weather i had plans on using them or not __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

11-26-2010, 01:22 AM	#7
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: Will these wheels work? Those are some sweet looking old skool wheels. __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's

11-26-2010, 02:16 AM	#8
Maxxd07 Registered User Join Date: Sep 2010 Location: ND Posts: 520	Re: Will these wheels work? Nope wont work, but I need the address and name so I know where they are and to whom recieves payment. Hell of a deal, I would be all over them. __________________ Name: Les ---------------------- Couple 80s Couple 70s One 68

11-26-2010, 02:37 AM	#9
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: Will these wheels work? maxxd07, u serious, cause the guy has still got them for sale __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O)

11-26-2010, 02:47 AM	#10
Maxxd07 Registered User Join Date: Sep 2010 Location: ND Posts: 520	Re: Will these wheels work? Naw, just messin with ya. I think its a good deal so grab them babies up! I would love to have some but dont have anything at the moment to put them on. They will fit your truck and the tires to fit are not that bad to find and/or purchase. __________________ Name: Les ---------------------- Couple 80s Couple 70s One 68

11-26-2010, 02:53 AM	#11
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: Will these wheels work? are you sure? the guy said they came off a ford __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O)

11-26-2010, 05:56 AM	#12
rollinhard Registered User Join Date: Jun 2010 Location: British Columbia Posts: 192	Re: Will these wheels work? Ya those wheels should work. The bolt pattern for 8 lug wheels didn't change until ford went to the superduty in like 99 or so they went metric. The difference in the older wheels is the centre hole is bigger but unless your using the wheel to max load rating I think its ok Posted via Mobile Device __________________ If you can't impress them with your inteligence, dazzle'm with your stupidity 1969 GMC lwb 2wheel drive can you say big stroker motor to come hehe

11-26-2010, 06:53 AM	#13
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: Will these wheels work? I have a set of wheels off of an 92ish f250 and they work fine. The center hole is larger than my hub so they fit sloppy, but are fine when you torque them down. Some say that you may break lugs, but I've had 3600 pounds of gravel loaded in my bed and drove down the freeway and all my lugs are still in place. __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's

11-26-2010, 09:19 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Will these wheels work? Yes,they will work and they are worth $75 each.16.5s do not cost an arm and a leg.All tires cost an arm and a leg in the past couple tears since so many diameters have become available.16s are a bit less now (used to be the other way around) and 17s are more.The period correct wheels really set these trucks of like none other.Contemporary custom wheels are what cost an arm and a leg.You can buy a whole lotta tire with the money you'll save on these wheels. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 11-26-2010 at 09:22 AM.

11-28-2010, 11:27 AM	#16
packers05 Registered User Join Date: Feb 2009 Location: minonk illinois Posts: 224	Re: Will these wheels work? 16.5 tires are less popular so yes they are slightly more and fewer choices but if you choose a popular tread and size they are not that bad of a deal considering how cool those wheels are!! I have a set of 6 lug 15" ones just likem and they look good to me



Register or Log In To remove these advertisements.

11-26-2010, 01:21 PM	#17
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Will these wheels work? Open this link and scroll down to the 8 lug wheel, read it and then go measure your truck, s/b 6.5" i think but don't quote me, then pull a wheel and measure the backspacing, i'm guessing about4" but again don't quote me. now that you have this information go look at the wheels and take a tape measure, check the lugs and backspacing.. http://www.mrt-wheels.com/boltpattern.html __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

11-26-2010, 02:20 PM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Will these wheels work? Back then we never gave backspacing a thought.I never knew what back spacing any of the wheels I ever ran were,never was asked what I needed when buying,nor was asked when selling.They just fit.Things were actually standardized back before the whole wheel/tire thing got so weirded out in recent years.All 8-lug patterns were the same when these wheels were made. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-26-2010, 02:37 PM	#19
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Will these wheels work? They will fit. NEVER seen them in the 99+ metric pattern. Only 8X6.5. I have never seen them for less than 200 a set. They are the BEST looking retro aluminum 8 lug IMO. __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

11-26-2010, 02:40 PM	#20
travlinman Registered User Join Date: Feb 2009 Location: stockton ca. Posts: 502	Re: Will these wheels work? theres a guy around me thats been trying to sell a set of these in 6 lug for a looong time and he wants 150-200 for a set of 4. for 75 they should already be in the garage. __________________ 94 ls swap silverado 65 Pontiac 78 c30 crew cab dually (parted and gone) 82 c30 crew cab dually ( now building ) 91 r30 crew cab dually (parted and gone) 69 swb-sold 71 lab sold all in progress......__ ..........._______ \|__\__ ..........\|__(O)______(O)] ........................

11-26-2010, 03:42 PM	#21
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: Will these wheels work? so its official, im getting the wheels on monday for $75, plus $10 for delivery __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O)

11-26-2010, 04:06 PM	#22
48stude Registered User Join Date: Sep 2010 Location: Murfreesboro, TN Posts: 4	Re: Will these wheels work? 8 lug, chevy, dodge and pre 99 ford, are all 8 on 6.5 bolt pattern

11-26-2010, 05:45 PM	#23
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,993	Re: Will these wheels work? Those are cool wheels. A few guys on the board are running them on their 4x4's. __________________ … … … … … … … … ... … … … … … … … … … … …

11-28-2010, 04:21 AM	#24
PTS Junior Member Join Date: Nov 2005 Location: Roswell, N.M. Posts: 241	Re: Will these wheels work? I love those wheels. 1. Check center bore and make sure it fits. I have seen studs get bent over center bore being off just a lil especially when tire store cranks them with impact. 2. Make sure lugs are correct length and do not bottom out. Perry PTS

11-28-2010, 12:42 PM	#25
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: Will these wheels work? so i went and talked to a couple guys in the tire buisness today that i trust, and they said not to buy them. they have no bead, so if you roll a tire it will go off the rim, and that these rims are really hard to find tires for, at least the kind i want, so, im not going to buy them __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.