What headers should I use? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

79beater · 11-30-2010, 03:15 PM

I'm in the market for a set of headers, but there isn't much information on how they fit certain models. I have a 79 GMC, LWB, 2wd, with a 350. I need to replace the stock manifolds and want to maintain as much clearance from starter, frame, road, and trans. as I can. I think shorties or 3/4 length would be best, but I'm not sure. I cant find anyone who uses anything but full length on a 79. I also would like to have a thick flange and not break the bank. Sanderson headers look like they may work but can find anyone with them. Thanks for any suggestions

babyJay · 11-30-2010, 04:15 PM

I think camaro headers fit, you can search the site at the top of the page. Welcome aboard!

ECU PIRATE · 11-30-2010, 04:43 PM

Try some 78-87 GM " G " body headers (i.e. Chevelle, Monte Carlo, Cutlass). I will be running a pair of Hedman HTC # 68316 full tubes on mine. I think some other guys on here are using G body headers as well. Buy some junk ones 1st for a mock up

*Norwood* · 12-16-2011, 02:56 PM

I got some 4 into 1 hedman headers for a 79 camaro I will sell CHEAP. they just need a little polishing and straitening but they will fit perfect. $80 and they're yours

11-30-2010, 03:15 PM	#1
79beater Registered User Join Date: Nov 2010 Location: memphis, TN Posts: 33	What headers should I use? I'm in the market for a set of headers, but there isn't much information on how they fit certain models. I have a 79 GMC, LWB, 2wd, with a 350. I need to replace the stock manifolds and want to maintain as much clearance from starter, frame, road, and trans. as I can. I think shorties or 3/4 length would be best, but I'm not sure. I cant find anyone who uses anything but full length on a 79. I also would like to have a thick flange and not break the bank. Sanderson headers look like they may work but can find anyone with them. Thanks for any suggestions

11-30-2010, 04:15 PM	#2
babyJay Arrived on a Pale Horse Join Date: Mar 2007 Location: SnagTown Indiana Posts: 2,524	Re: What headers should I use? I think camaro headers fit, you can search the site at the top of the page. Welcome aboard! __________________ Jason 87 V30 350TBI/400 White w/Boss V-plow 89 R3500 CC SRW

11-30-2010, 04:43 PM	#3
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: What headers should I use? Try some 78-87 GM " G " body headers (i.e. Chevelle, Monte Carlo, Cutlass). I will be running a pair of Hedman HTC # 68316 full tubes on mine. I think some other guys on here are using G body headers as well. Buy some junk ones 1st for a mock up __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

12-16-2011, 02:56 PM	#4
Norwood Account Suspended Join Date: Apr 2011 Location: Bucksnort, TN Posts: 8	Re: What headers should I use? I got some 4 into 1 hedman headers for a 79 camaro I will sell CHEAP. they just need a little polishing and straitening but they will fit perfect. $80 and they're yours

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.