Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
12-02-2010, 09:59 PM | #1 |
Registered User
Join Date: Apr 2007
Location: ontario
Posts: 247
|
Vintage Air front runner?
For those of you that are using the Vintage Air front runner on your sbc with power steering box, do you use the original hoses? (67-72) I have to modify the inner fender that I made for my project. I haven't bought the front runner yet and don't have any power hoses either. I want to purchase the hoses so I can do the work to my inner fender but want to make sure I'm buying the proper hoses.
|
12-02-2010, 10:13 PM | #2 |
Registered User
Join Date: Nov 2009
Location: Idaho
Posts: 34
|
Re: Vintage Air front runner?
I put this on my SBC but I also installed a rack and pinion at the same time. I had a nice braided stainless hose made at one if the local hose supply shops. It cost me about $20 I think that was the good guy price.
Beware the bolts on this they used metric and ASE not a good call IMO after cross threading them (starting them by hand) I tossed them and went to Ace and bought all ASE bolts. |
12-03-2010, 10:11 AM | #3 |
Registered User
Join Date: Apr 2007
Location: ontario
Posts: 247
|
Re: Vintage Air front runner?
I'll be using a stock steering box and would like know if I would be using the stock hose to attach to the steering pump that Vintage supplies or if I get the stock hoses can they be modified if need be to fit the pump.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|