Firewall to Tail Lamp Harness - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TheWhiteElephant · 12-12-2010, 04:30 AM

I'd like to replace the harness/wires that run from the firewall back to the taillamp harness. There are 4 wires on this harness--brown, yellow, light green, and dark green.

I found a bulk roll at a local auto supply but it has a white wire instead of a light green wire but I'd like to keep the same colors for posterity's sake. Anyone know where can get one? I am going to begin refurbishing my wiring harness(es).

Thanks.

**old Rusty C10** · 12-12-2010, 03:59 PM

maybe a trailer supply place?

TheWhiteElephant · 12-12-2010, 08:40 PM

Yes, that's where I'm going tomorrow. The one I found was at the trailer supply section of the parts store. I pulled the old dry, cracked harness today and will tackle that tomorrow.

12-12-2010, 04:30 AM	#1
TheWhiteElephant God is good! Join Date: Sep 2010 Location: Texas Posts: 689	Firewall to Tail Lamp Harness I'd like to replace the harness/wires that run from the firewall back to the taillamp harness. There are 4 wires on this harness--brown, yellow, light green, and dark green. I found a bulk roll at a local auto supply but it has a white wire instead of a light green wire but I'd like to keep the same colors for posterity's sake. Anyone know where can get one? I am going to begin refurbishing my wiring harness(es). Thanks. __________________ Mando *"It takes a smart man to know when he's stupid." -- Barney Rubble* My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=430367 Last edited by TheWhiteElephant; 12-12-2010 at 04:32 AM.

12-12-2010, 03:59 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Firewall to Tail Lamp Harness maybe a trailer supply place? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-12-2010, 08:40 PM	#3
TheWhiteElephant God is good! Join Date: Sep 2010 Location: Texas Posts: 689	Re: Firewall to Tail Lamp Harness Yes, that's where I'm going tomorrow. The one I found was at the trailer supply section of the parts store. I pulled the old dry, cracked harness today and will tackle that tomorrow. __________________ Mando *"It takes a smart man to know when he's stupid." -- Barney Rubble* My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=430367

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.